Junfeng Wang 
- (2024): Impacts of nano C-S-H-PCE on durability-related properties of Portland cement composites with high-volume GGBFS. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Degradation mechanism and strength prediction of aeolian sand concrete under sulphate dry-wet cycles. In: Construction and Building Materials, v. 450 (November 2024).
- (2024): Response characteristics of curved girder bridges with single-column piers during the whole overturning process: Experimental and numerical study. In: Structures, v. 66 (August 2024).
- (2024): Effect of CaO/Na2SiO3 ratio on mechanical properties, microstructures and environmental leaching characteristics of neutralization slag based geopolymers. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): The synergistic effect of microorganisms and multiple admixtures on improving the self-healing of cracks in biogenic mortar exposed to different marine environments. In: Construction and Building Materials, v. 423 (April 2024).
- (2024): Strength development and polymerization reaction mechanism of sulfur-tailings-based geopolymer produced with CaO and Na2SiO3 composite activator. In: Construction and Building Materials, v. 421 (March 2024).
- (2024): Research on printing parameters and salt frost resistance of 3D printing concrete with ferrochrome slag and aeolian sand. In: Journal of Building Engineering, v. 84 (May 2024).
- (2023): The effects of surface modification by using phytic acid-based hybrid complexes on the interfacial properties of heat-treated wood. In: Construction and Building Materials, v. 403 (November 2023).
- (2024): Deterioration law and life prediction of aeolian sand concrete under sulfate freeze-thaw cycles. In: Construction and Building Materials, v. 411 (January 2024).
- (2024): Impact of sulfoaluminate cement modification on corrosion resistance of reactive powder concrete subjected to ammonium sulfate-rich sewer environment. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Analytical method for overturning risk assessment of curved girder bridges with single-column piers under heavy-duty vehicles. In: Structures, v. 57 (November 2023).
- (2023): Multifractal characteristics of fatigue cracks in the full-scale reinforced concrete hollow-slab beams. In: Structures, v. 57 (November 2023).
- (2023): Evaluation of mechanical properties and abrasion resistance of PAN fiber-reinforced sulfoaluminate cement composites. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2022): Characterization of microbial-induced concrete corrosion by combining morphology observation and fluorescence staining. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Investigating mechanical properties and microstructure of reactive powder concrete blended with sulfoaluminate cement. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Study on impact factors of small- and medium-span bridges under the special-purpose vehicle load. In: Structures, v. 43 (September 2022).
- (2022): The adaptability of Sporosarcina pasteurii in marine environments and the feasibility of its application in mortar crack repair. In: Construction and Building Materials, v. 332 (May 2022).
- (2022): Multifractal analytical method and experimental study on crack evolution of dismantled RC hollow-slab beam. In: Structures, v. 40 (June 2022).
- (2022): Effects of the combination of compression and impregnation with phenolic resin on the dimensional stability in the multiscale wood structure of Chinese fir. In: Construction and Building Materials, v. 327 (April 2022).
- (2021): Research Progress of Electrostatic Spray Technology over the Last Two Decades. In: Journal of Energy Engineering, v. 147, n. 4 (August 2021).
- (2020): Assessment on Combustion and Emissions of Diesel Engine Fueled with Partially Hydrogenated Biodiesel. In: Journal of Energy Engineering, v. 146, n. 1 (February 2020).
- (2020): Permit checking of overloaded customized transport vehicle based on serviceability limit state reliability of concrete bridges. In: Advances in Structural Engineering, v. 24, n. 5 (November 2020).
- (2020): Axial performance degradation of squared CFST stubs in severe cold and acid rain area. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Mesoscopic Transmission Model of Chloride Ions in Concrete Based on Coupling Influence between Multiple Mechanisms and External Load. In: Advances in Civil Engineering Materials, v. 9, n. 1 (28 January 2020).
- (2020): Durability and mechanism of high-salt resistance concrete exposed to sewage-contaminated seawater. In: Construction and Building Materials, v. 257 (October 2020).
- (2020): Development of a unified model to predict the axial stress–strain behavior of recycled aggregate concrete confined through spiral reinforcement. In: Engineering Structures, v. 218 (September 2020).
- (2020): Effect of graphite tailings as substitute sand on mechanical properties of concrete. In: European Journal of Environmental and Civil Engineering, v. 26, n. 7 (July 2020).
- (2020): A New Method for Designing Dense Skeleton Asphalt Mixture Based on Meso Parameter. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Time-temperature-stress equivalence in compressive creep response of Chinese fir at high-temperature range. In: Construction and Building Materials, v. 235 (February 2020).
- (2018): Preparation of hydro-thermal surface-densified plywood inspired by the stiffness difference in "sandwich structure" of wood. In: Construction and Building Materials, v. 177 (July 2018).
Structurae cooperates with
