Haidong Wang 
- (2023): Source Location Identification in an Ideal Urban Street Canyon with Time-Varying Wind Conditions under a Coupled Indoor and Outdoor Environment. In: Buildings, v. 13, n. 12 (22 November 2023).
- (2023): Investigation on the unsteady ventilation performance of oscillating jet air supply through both spontaneous vortex street effect and active modulation. In: Journal of Building Engineering, v. 80 (December 2023).
- (2023): A simplified cooling load calculation method based on equivalent heat transfer coefficient for large space buildings with a stratified air-conditioning system. In: Energy and Buildings, v. 296 (October 2023).
- (2023): On the fast fluid dynamics and fractional step methods to predict the coupled indoor temperature and velocity fields. In: Building and Environment, v. 229 (February 2023).
- (2023): Identification of source location in a single-sided building with natural ventilation: Case of interunit pollutant dispersion. In: Journal of Building Engineering, v. 68 (June 2023).
- (2022): Simulation and experimental study on the elbow pressure loss of large air duct with different internal guide vanes. In: Building Services Engineering Research and Technology, v. 43, n. 6 (August 2022).
- (2022): Investigation of the quasi-periodic airflow oscillation and ventilation performance of an enclosed environment with a jet air supply. In: Energy and Buildings, v. 265 (June 2022).
- (2022): Performance evaluation of different pressure-velocity decoupling schemes in built environment simulation. In: Energy and Buildings, v. 257 (February 2022).
- (2022): Investigation of inter-zonal heat transfer in large space buildings based on similarity: Comparison of two stratified air-conditioning systems. In: Energy and Buildings, v. 254 (January 2022).
- (2018): Modeling and Experimental Verification of a Straight-Through Evacuated Tube Installed on a Façade for Solar Space Heating. In: Journal of Energy Engineering, v. 144, n. 1 (February 2018).
- (2020): Heat transfer between occupied and unoccupied zone in large space building with floor-level side wall air-supply system. In: Building Simulation, v. 13, n. 6 (August 2020).
- (2012): Experimental verification of tracking algorithm for dynamically-releasing single indoor contaminant. In: Building Simulation, v. 5, n. 1 (March 2012).
- (2013): Feasibility of utilizing numerical viscosity from coarse grid CFD for fast turbulence modeling of indoor environments. In: Building Simulation, v. 7, n. 2 (December 2013).
- (2019): Inverse tracking of an airborne pollutant source location in a residential apartment by joint simulation of CFD and a multizone model. In: Building Simulation, v. 12, n. 4 (July 2019).
- (2020): Solutions to mitigate the impact of measurement noise on the air pollution source strength estimation in a multi-zone building. In: Building Simulation, v. 13, n. 6 (August 2020).
- (2021): Experimental study on grout defects detection for grouted splice sleeve connectors using stress wave measurement. In: Construction and Building Materials, v. 274 (March 2021).
- (2016): Investigating ventilation system performance in large space building: A nozzle primary air supply with secondary airflow-relay system. In: Science and Technology for the Built Environment, v. 23, n. 2 (December 2016).
- (2019): Effect of air quality and dust deposition on power generation performance of photovoltaic module on building roof. In: Building Services Engineering Research and Technology, v. 41, n. 1 (December 2019).
- (2016): Advances in building simulation and computational techniques: A review between 1987 and 2014. In: Energy and Buildings, v. 128 (September 2016).
- (2018): Experimental study on the characteristics of secondary airflow device in a large enclosed space building. In: Energy and Buildings, v. 166 (May 2018).
- (2020): Gas distribution mapping for indoor environments based on laser absorption spectroscopy: Development of an improved tomographic algorithm. In: Building and Environment, v. 172 (April 2020).
- (2020): Torsional and rocking response of the foundation induced by obliquely spatial incident S waves. In: Soil Dynamics and Earthquake Engineering, v. 130 (March 2020).
- (2020): The impact of building configurations and anthropogenic heat on daily urban air temperature cycles. In: Building and Environment, v. 169 (February 2020).
- (2019): On the calculation of heat migration in thermally stratified environment of large space building with sidewall nozzle air-supply. In: Building and Environment, v. 147 (January 2019).
- (2018): Literature review on pressure–velocity decoupling algorithms applied to built-environment CFD simulation. In: Building and Environment, v. 143 (October 2018).
- (2017): Inverse modeling of indoor instantaneous airborne contaminant source location with adjoint probability-based method under dynamic airflow field. In: Building and Environment, v. 117 (May 2017).
- (2012): Analyzing grid independency and numerical viscosity of computational fluid dynamics for indoor environment applications. In: Building and Environment, v. 52 (June 2012).
- (2009): Numerical simulation on a horizontal airflow for airborne particles control in hospital operating room. In: Building and Environment, v. 44, n. 11 (November 2009).
- (2019): Experimental investigation of damaged circular reinforced concrete columns with pre-tensioned steel hoops. In: Engineering Structures, v. 197 (October 2019).
- (2013): Comparison of Seismic Experiments on Traditional Chinese Wood Structures and Light Wood-Framed Structures. In: Journal of Structural Engineering (ASCE), v. 139, n. 11 (November 2013).
Structurae cooperates with
