Gang Wang 
- (2024): The Automated Inspection of Precast Utility Tunnel Segments for Geometric Quality Based on the BIM and LiDAR. In: Buildings, v. 14, n. 9 (25 August 2024).
- (2024): Automated Defect Detection on Dry-Hanging Stone Curtain Walls through Colored Point Clouds. In: Buildings, v. 14, n. 9 (25 August 2024).
- (2024): Design and Verification of Experimental Device for Pressurized Bubbling Absorption and Transport Characteristics in Vacuum Environment. In: Buildings, v. 14, n. 6 (19 June 2024).
- (2023): A comparison of stress-displacement for a pressure tunnel with impermeable or permeable liner in elastic porous media. In: Computers and Geotechnics, v. 163 (November 2023).
- (2024): Damping‐dependent correlations between horizontal‐horizontal, horizontal‐vertical, and vertical‐vertical pairs of spectral accelerations. In: Earthquake Engineering and Structural Dynamics, v. 53, n. 7 (March 2024).
- (2024): Cross-sectional layout optimization of the umbilical based on the quasi-physical algorithm. In: Marine Structures, v. 96 (July 2024).
- (2023): Design optimization integrating energy, economic, and environmental evaluation of a hybrid solar heating system for detached buildings in rural China. In: Journal of Building Engineering, v. 73 (August 2023).
- (2023): Determination and Application of Optimum Abrasive Mass Flow Rate of Abrasive Waterjet. In: KSCE Journal of Civil Engineering, v. 27, n. 12 (October 2023).
- (2023): Comparison of empirically-based and physically-based analyses of coseismic landslides: A case study of the 2016 Kumamoto earthquake. In: Soil Dynamics and Earthquake Engineering, v. 172 (September 2023).
- (2023): Coupled rheological behavior of tunnel rock masses reinforced by rock bolts based on the non-hydrostatic stress field. In: Tunnelling and Underground Space Technology, v. 137 (July 2023).
- (2022): Analysis of gap heat loss in external thermal insulation system of passive low-energy-consumption building based on CFD. In: Journal of Building Performance Simulation, v. 16, n. 1 (September 2022).
- (2022): Data-driven Energy Management in Residential Areas Leveraging Demand Response. In: Energy and Buildings, v. 269 (August 2022).
- (2022): Adhesion behavior and deposition morphology of cement grout flowing through granular materials. In: Construction and Building Materials, v. 337 (June 2022).
- (2022): Cutting depth of pile materials subjected to the abrasive waterjet and its prediction model. In: Tunnelling and Underground Space Technology, v. 124 (June 2022).
- (2022): The connection performance and bearing capacity of a single-layer combined lattice shell with aluminium alloy honeycomb panels. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2022): A beam-type element for analyzing the eccentric load effect of box girder bridges. In: Structures, v. 36 (February 2022).
- (2021): Calculation method of the bearing capacity of a novel modular joint of an aluminium alloy lattice shell structure. In: Structures, v. 34 (December 2021).
- (2021): Automation of seismic design of high-rise structure with braced steel frame. Presented at: IABSE Congress: Structural Engineering for Future Societal Needs, Ghent, Belgium, 22-24 September 2021.
- (2021): ASS-GPR: Adaptive Sequential Sampling Method Based on Gaussian Process Regression for Reliability Analysis of Complex Geotechnical Engineering. In: International Journal of Geomechanics, v. 21, n. 10 (October 2021).
- (2020): Anisotropic Characteristics of Post Sheared Fracture Surface. In: International Journal of Geomechanics, v. 20, n. 7 (July 2020).
- (2021): Bond behavior of square CFT using manufactured sand and recycled coarse aggregate. In: Construction and Building Materials, v. 269 (February 2021).
- (2019): Data-driven energy models for existing VFD-motor-pump systems. In: Science and Technology for the Built Environment, v. 25, n. 6 (3 July 2019).
- (2012): Air handling unit supply air temperature optimal control during economizer cycles. In: Energy and Buildings, v. 49 (June 2012).
- (2019): Accuracy improvement of virtual pump water flow meters using calibrated characteristics curves at various frequencies. In: Energy and Buildings, v. 191 (May 2019).
- (2019): A comprehensive review of energy-related data for U.S. commercial buildings. In: Energy and Buildings, v. 186 (March 2019).
- (2020): Degradation model of the dynamic mechanical properties and damage failure law of sandstone under freeze-thaw action. In: Soil Dynamics and Earthquake Engineering, v. 132 (May 2020).
- (2014): Comparison of different fan control strategies on a variable air volume systems through simulations and experiments. In: Building and Environment, v. 72 (February 2014).
- (2017): Determination of the bearing capacity of a Concrete-filled Steel Tubular arch support for tunnel engineering: Experimental and theoretical studies. In: KSCE Journal of Civil Engineering, v. 21, n. 7 (May 2017).
- (2017): Bayesian approach to breathing crack detection in beam structures. In: Engineering Structures, v. 148 (October 2017).
- (2019): A damage mechanical model applied to analysis of mechanical properties of jointed rock masses. In: Tunnelling and Underground Space Technology, v. 84 (February 2019).
Structurae cooperates with
