Dehui Wang 
- (2024): Evaluation of anisotropy and statistical parameters of compressive strength for 3D printed concrete. In: Construction and Building Materials, v. 440 (August 2024).
- (2024): Thaumasite sulfate attack characteristic of seawater and sea sand concrete with limestone powder in different sulfate environment at low temperature. In: Construction and Building Materials, v. 437 (July 2024).
- (2024): Study on bending performance of 3D printed PVA fiber reinforced cement-based material. In: Construction and Building Materials, v. 433 (June 2024).
- (2024): Effects of synthetic fibres on the fracture behaviours of recycled coarse aggregate concrete. In: Construction and Building Materials, v. 418 (March 2024).
- (2024): Influences of aggregate gradation on alkali-silica reaction of seawater and sea sand concrete. In: Construction and Building Materials, v. 427 (May 2024).
- (2024): Comparative analysis of sulfate resistance between seawater sea sand concrete and freshwater desalted sea sand concrete under different exposure environments. In: Construction and Building Materials, v. 416 (February 2024).
- (2023): Effects of pressurized carbonation with presoaking in calcium hydroxide solution on the fracture behaviours of recycled coarse aggregate concrete. In: Construction and Building Materials, v. 397 (September 2023).
- (2023): Characteristics of the alkali-silica reaction in seawater and sea sand concrete with different water-cement ratios. In: Construction and Building Materials, v. 400 (October 2023).
- (2024): Effects of desalinated sea sand on the alkali-silica reaction of seawater and sea sand concrete. In: Magazine of Concrete Research, v. 76, n. 7 (April 2024).
- (2023): Pull-out behaviour of steel fibres embedded in ultra-high-performance concrete after exposure to high temperatures. In: Construction and Building Materials, v. 408 (December 2023).
- (2023): Effects of interval time and interfacial agents on the mechanical characteristics of ultra-high toughnessnn cementitious composites under 3D-printed technology. In: Construction and Building Materials, v. 374 (April 2023).
- (2022): Effects of graphene oxide (GO) on resistance to chloride-ion penetration of concrete. In: Magazine of Concrete Research, v. 74, n. 19 (October 2022).
- (2022): The Role of Limestone Powder in the Corrosion Products of Cement Mortars under Magnesium Sulfate Solution. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 4 (April 2022).
- (2022): The role of temperature in the thaumasite formation under the immersion of magnesium sulfate solution. In: Magazine of Concrete Research, v. 74, n. 13 (July 2022).
- (2021): Review of the Properties of Fiber-Reinforced Polymer-Reinforced Seawater–Sea Sand Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 10 (October 2021).
- (2021): The Relationship between Cementitious Composition and Properties of Ultrahigh Strength Concrete. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2018): A review on use of limestone powder in cement-based materials: Mechanism, hydration and microstructures. In: Construction and Building Materials, v. 181 (August 2018).
- (2018): Design of high performance concrete with multiple performance requirements for #2 Dongting Lake Bridge. In: Construction and Building Materials, v. 165 (March 2018).
- (2019): A quantitative study on physical and chemical effects of limestone powder on properties of cement pastes. In: Construction and Building Materials, v. 204 (April 2019).
- (2016): Factorial Design Method for Designing Ternary Composite Cements to Mitigate ASR Expansion. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 9 (September 2016).
- (2012): Review of Thaumasite Sulfate Attack on Cement Mortar and Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 24, n. 12 (December 2012).
- (2015): Effects of Deicing Salts on the Scaling Resistance of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 5 (May 2015).
- (2016): Uniaxial Compression Behavior of Ultra-High Performance Concrete with Hybrid Steel Fiber. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 12 (December 2016).
- (2015): A review on ultra high performance concrete: Part II. Hydration, microstructure and properties. In: Construction and Building Materials, v. 96 (October 2015).
- (2015): A review on ultra high performance concrete: Part I. Raw materials and mixture design. In: Construction and Building Materials, v. 101 (December 2015).
- (2017): An overview on the effect of internal curing on shrinkage of high performance cement-based materials. In: Construction and Building Materials, v. 146 (August 2017).
- (2017): Early age shrinkage and heat of hydration of cement-fly ash-slag ternary blends. In: Construction and Building Materials, v. 153 (October 2017).
- (2018): A review on effects of limestone powder on the properties of concrete. In: Construction and Building Materials, v. 192 (December 2018).
- (2015): A Single-Plane Beam-Arch Hybrid Bridge in China. In: Structural Engineering International, v. 25, n. 1 (February 2015).
- (2015): Application of a Perfobond Rib Shear Connector Group in a Beam–Arch Hybrid Bridge. In: Structural Engineering International, v. 25, n. 4 (November 2015).
Structurae cooperates with
