Dafu Wang
- (2024): Quantitative surface quality evaluation for 3D-printed concrete with coarse aggregate through 3D scanning. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Study on test of free and total SO42- in cement-based materials subjected to sulfate attack by conductivity titration. In: Construction and Building Materials, v. 424 (April 2024).
- (2024): A mechanistic model of the degradation of cement-based materials subjected to sulfate attack. In: Construction and Building Materials, v. 421 (March 2024).
- (2024): Study on sulfate diffusion test and mathematical model of manufactured sand concrete under typical freeze-thaw environment in Northwest China. In: Construction and Building Materials, v. 419 (March 2024).
- (2024): Internal superhydrophobic marine concrete: Interface modification based on slag microstructure regulation. In: Journal of Building Engineering, v. 86 (June 2024).
- (2023): Study on the carbonation degree of lime-activated low carbon cementitious materials: Based on the CO2 binding capacity of hydrates. In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Pore structure and fractal dimension analysis of ancient city wall bricks in China. In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Study on the composition of calcium alumina silicate hydrate (CASH) in lime-activated low carbon cementitious materials: The influence of alkaline additives. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Influence of gradation on extrusion-based 3D printing concrete with coarse aggregate. In: Construction and Building Materials, v. 403 (November 2023).
- (2023): Experimental study on early shrinkage and later expansion of concrete under a simulated geothermal environment. In: Journal of Building Engineering, v. 72 (August 2023).
- (2023): Comparative study on material properties of ancient fired clay bricks of China. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): 3D Printed concrete with coarse aggregates: Built‒in‒Stirrup permanent concrete formwork for reinforced columns. In: Journal of Building Engineering, v. 70 (July 2023).
- (2023): Degradation of mortar fully buried in saline soil containing sodium sulfate or magnesium sulfate. In: Construction and Building Materials, v. 369 (March 2023).
- (2023): Modified random hierarchical bundle model for predicting gas permeability of cement-based materials. In: Construction and Building Materials, v. 363 (January 2023).
- (2023): Numerical simulation of effective diffusivity in concrete with random microcracks. In: Journal of Building Engineering, v. 63 (January 2023).
- (2021): Structural kinetics constitutive models for characterizing the time-dependent rheologic behaviors of fresh cement paste. In: Construction and Building Materials, v. 276 (March 2021).
- (2022): Steel fiber orientational distribution and effects on 3D printed concrete with coarse aggregate. In: Materials and Structures, v. 55, n. 3 (19 March 2022).
- (2022): Thermokinetics of capillary absorption and its application in cement-based materials. In: Construction and Building Materials, v. 334 (June 2022).
- (2021): Study on dynamic and static structural build-up of fresh cement paste with limestone powder based on structural kinetics model. In: Construction and Building Materials, v. 305 (October 2021).
Structurae cooperates with
