Changqing Wang 
- (2024): Mesoscopic 3D simulation and in-situ 4D CT investigation on the mechanical behaviors of high-toughness recycled aggregate concrete. In: Construction and Building Materials, v. 442 (September 2024).
- (2024): In-situ 4D CT scanning and digital volume correlation for 3D kinematic field analysis in high-toughness recycled aggregate concrete. In: Construction and Building Materials, v. 453 (November 2024).
- (2024): Characterization of geopolymer with 100 % thermoactivated construction spoil powder: Effects of alkali dosage, silicate modulus and curing temperature. In: Journal of Building Engineering, v. 98 (December 2024).
- (2025): Characterization of failure modes and mechanical behavior of micro-fiber-reinforced recycled aggregate concrete under Hopkinson pressure bar and in-situ CT techniques. In: Construction and Building Materials, v. 458 (January 2025).
- (2024): New insights into the effects of silicate modulus, alkali content and modification on multi-properties of recycled brick powder-based geopolymer. In: Journal of Building Engineering, v. 97 (November 2024).
- (2024): A comparative study of low cyclic loading effects on plastic strain, nonlinear damping, and strength softening in fiber-reinforced recycled aggregate concrete. In: Journal of Building Engineering, v. 97 (November 2024).
- (2024): New insights into the mechanical behavior and enhancement mechanism of micro-steel-fiber-reinforced recycled aggregate concrete through in-situ 4D CT analysis. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Mechanical behavior and fiber reinforcing mechanism of high-toughness recycled aggregate concrete under high strain-rate impact loads. In: Construction and Building Materials, v. 437 (July 2024).
- (2024): Elaborating the 3D microstructural characteristics and strength softening mechanical mechanism of fiber-reinforced recycled aggregate concrete. In: Construction and Building Materials, v. 436 (July 2024).
- (2024): Development of sustainable geopolymer with excavation soil powder as precursor: Cementitious properties and thermal-activated modification. In: Journal of Building Engineering, v. 91 (August 2024).
- (2024): Exploring seismic resilience in frame structures through advanced numerical modeling and dynamic nonlinear analysis of recycled aggregate concrete. In: Structures, v. 63 (May 2024).
- (2023): Effects of construction waste powder on micro–macro properties of green high-strength cement paste with low water-to-binder ratio. In: Construction and Building Materials, v. 385 (July 2023).
- (2023): Microstructural and Macroperformance of Recycled Mortar with High-Quality Recycled Aggregate and Powder from High-Performance Concrete Waste. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 3 (March 2023).
- (2023): Calculation on flexural capacity of recycled aggregate concrete beams. In: Advances in Structural Engineering, v. 26, n. 6 (January 2023).
- (2023): Effect of ground concrete waste as green binder on the micro-macro properties of eco-friendly metakaolin-based geopolymer mortar. In: Journal of Building Engineering, v. 68 (June 2023).
- (2023): Chloride diffusion and binding capacity of sustainable cementitious materials with construction waste powder as cement replacement. In: Construction and Building Materials, v. 368 (March 2023).
- (2022): Properties of green mortar blended with waste concrete-brick powder at various components, replacement ratios and particle sizes. In: Construction and Building Materials, v. 342 (August 2022).
- (2022): Rate sensitivity analysis of structural behaviors of recycled aggregate concrete frame. In: Journal of Building Engineering, v. 45 (January 2022).
- (2022): Hysteretic deteriorating behaviors of fiber-reinforced recycled aggregate concrete composites subjected to cyclic compressive loadings. In: Journal of Building Engineering, v. 49 (May 2022).
- (2022): Investigation on mechanical behaviors of a new sustainable composite material for fiber-reinforced recycled aggregate concrete under compressive low-cycle loadings. In: Construction and Building Materials, v. 326 (April 2022).
- (2022): Drying shrinkage, mechanical and transport properties of sustainable mortar with both recycled aggregate and powder from concrete waste. In: Journal of Building Engineering, v. 49 (May 2022).
- (2022): Hysteresis and damping properties of steel and polypropylene fiber reinforced recycled aggregate concrete under uniaxial low-cycle loadings. In: Construction and Building Materials, v. 319 (February 2022).
- (2021): Dynamic Damage Analysis of Recycled Aggregate Concrete Structures. In: Journal of Earthquake Engineering, v. 26, n. 12 (July 2021).
- (2021): D-Shaped Concrete-Filled Steel Tube Structure in Bridge Engineering. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2019): Nonlinear damping and nonlinear responses of recycled aggregate concrete frames under earthquake loading. In: Engineering Structures, v. 201 (December 2019).
- (2019): Numerical Analysis of Hysteretic Behavior for RAC Structure under Earthquake Loading. In: Journal of Asian Architecture and Building Engineering, v. 18, n. 4 (July 2019).
- (2019): Material Modeling in the Dynamic Nonlinear Analysis for Recycled Aggregate Concrete Structures. In: Journal of Earthquake Engineering, v. 23, n. 5 ( 2019).
- (2019): Investigation on the Seismic Damage of Recycled Aggregate Concrete Frame Structure. In: Journal of Earthquake Engineering, v. 25, n. 5 (January 2019).
- (2017): Rate Dependence of Confined Recycled Aggregate Concrete. In: ACI Structural Journal, v. 114, n. 6 (November 2017).
- (2015): Polygonal loop model for hysteretic behaviour of frame structures with recycled aggregate concrete. In: European Journal of Environmental and Civil Engineering, v. 20, n. 9 (November 2015).
Structurae cooperates with
