Pete Walker 
- (2023): Compressive load resistance of straw bale assemblies under concentric and eccentric loading. In: Construction and Building Materials, v. 397 (September 2023).
- (2022): Lightweight aggregates as carriers for phase change materials. In: Construction and Building Materials, v. 360 (December 2022).
- (2016): Assessing the Impact of Aggregate Type on Air Lime Mortar Properties Using Scanning Electron Microscopy. In: Journal of Civil Engineering and Architecture, v. 10, n. 2 (February 2016).
- (2013): Evaluation of the thermal performance of an innovative prefabricated natural plant fibre building system. In: Building Services Engineering Research and Technology, v. 34, n. 4 (October 2013).
- (2020): Manufacture and characterisation of prototype straw bale insulation products. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Comparison of moisture buffering properties of plasters in full scale simulations and laboratory testing. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): Energy retrofit infill panels for historic timber-framed buildings in the UK: physical test panel monitoring versus hygrothermal simulation. In: Architectural Science Review, v. 64, n. 1-2 (October 2020).
- (2018): Bench-scale fire tests of Dark Red Meranti and Spruce finger joints in tension. In: Construction and Building Materials, v. 168 (April 2018).
- (2018): The influence of constituents on the properties of the bio-aggregate composite hemp-lime. In: Construction and Building Materials, v. 159 (January 2018).
- (2019): Heritage retrofit and cultural empathy; a discussion of challenges regarding the energy performance of historic UK timber-framed dwellings. In: International Journal of Building Pathology and Adaptation, v. 38, n. 2 (November 2019).
- (2018): Determination of optimal plaster thickness for moisture buffering of indoor air. In: Building and Environment, v. 130 (February 2018).
- (2016): In situ assessment of the fabric and energy performance of five conventional and non-conventional wall systems using comparative coheating tests. In: Building and Environment, v. 109 (November 2016).
- (2015): Moisture buffer potential of experimental wall assemblies incorporating formulated hemp-lime. In: Building and Environment, v. 93 (November 2015).
- (2019): Elastic response of cross-laminated engineered bamboo panels subjected to in-plane loading. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 172, n. 6 (December 2019).
- (2017): Computational Form-Fitting with Non-Standard Structural Elements. Presented at: IABSE Conference: Creativity and Collaboration – Instilling Imagination and Innovation in Structural Design, Bath, United Kingdom, 19-20 April 2017.
- (2009): Determining moisture levels in straw bale construction. In: Construction and Building Materials, v. 23, n. 8 (August 2009).
- (2012): Hygrothermal performance of an experimental hemp–lime building. In: Construction and Building Materials, v. 36 (November 2012).
- (2014): Durability characteristics of straw bales in building envelopes. In: Construction and Building Materials, v. 68 (October 2014).
- (2014): Inorganic stabilisation methods for extruded earth masonry units. In: Construction and Building Materials, v. 71 (November 2014).
- (2016): A method for the assessment of the internal structure of bio-aggregate concretes. In: Construction and Building Materials, v. 116 (July 2016).
- (2017): The influence of the casting process on the internal structure and physical properties of hemp-lime. In: Materials and Structures, v. 50, n. 2 (April 2017).
- (2014): China clay waste as aggregate in alkali-activated cement mortars. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 167, n. 6 (December 2014).
- (2013): Compression resistance of confined timber stud walls. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 166, n. 3 (June 2013).
- (2012): Development and testing of a prototype straw bale house. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 165, n. 6 (December 2012).
- (2012): Evaluating shear test methods for stabilised rammed earth. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 165, n. 6 (December 2012).
- (2015): Fire performance of metal-free timber connections. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 168, n. 4 (August 2015).
- (2013): Development of a novel mortar for use with unfired clay bricks. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 166, n. 1 (February 2013).
- (2013): Hygrothermal performance of bio-based insulation materials. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 166, n. 4 (August 2013).
- (2016): Appropriate structural unfired earth masonry units. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 169, n. 5 (October 2016).
- (2017): Form-Fitting Strategies for Diversity-Tolerant Design. Presented at: Interfaces: Architecture, Engineering, Science, Annual Meeting of the International Association of Shell & Spatial Structures (IASS), Hamburg, 25-27 September 2017.
Structurae cooperates with
