Sabrina Vantadori 
- (2023): A nonlocal elasticity theory to model the static behaviour of edge-cracked nanobeams. In: Frattura ed Integrità Strutturale, v. 18, n. 67 (17 December 2023).
- (2023): Fracture failure of quasi-brittle materials by a novel peridynamic model. In: Composite Structures, v. 323 (November 2023).
- (2023): A novel LDEM formulation with crack frictional sliding to estimate fracture and flexural behaviour of the shot-earth 772. In: Composite Structures, v. 305 (February 2023).
- (2023): Numerical simulation of the shear strength of the shot-earth 772-granite interface. In: Construction and Building Materials, v. 363 (January 2023).
- (2022): Effect of GO nanosheets on microstructure, mechanical and fracture properties of cement composites. In: Construction and Building Materials, v. 361 (December 2022).
- (2022): Microstructural, chemical and physical characterisation of the Shot-Earth 772. In: Construction and Building Materials, v. 341 (July 2022).
- (2016): Improved Zn-based coatings for ipersandelin steel products. In: Procedia Structural Integrity, v. 2 ( 2016).
- (2016): Mode I fracture toughness of fibre-reinforced concrete by means of a modified version of the two-parameter model. In: Procedia Structural Integrity, v. 2 ( 2016).
- (2017): Fatigue strength of welded joints under multiaxial non-proportional loading. In: Procedia Structural Integrity, v. 5 ( 2017).
- (2017): Fracture toughness of fibre-reinforced concrete determined by means of numerical analysis. In: Procedia Structural Integrity, v. 5 ( 2017).
- (2018): Contribution of date-palm fibres reinforcement to mortar fracture toughness. In: Procedia Structural Integrity, v. 13 ( 2018).
- (2021): Fatigue strength evaluation and lifetime estimation for ductile cast irons under multiaxial loading. In: Procedia Structural Integrity, v. 33 ( 2021).
- (2022): Fracture behaviour of nanobeams through Two-Phase Local/Nonlocal Stress-Driven model. In: Composite Structures, v. 280 (January 2022).
- (2021): Enhanced adhesive performance of epoxy resin coating by a novel bonding agent. In: Construction and Building Materials, v. 301 (September 2021).
- (2021): Fracture behaviour of hybrid fibre-reinforced roller-compacted concrete used in pavements. In: Construction and Building Materials, v. 271 (February 2021).
- (2020): Fracture mechanics-based mixture optimization of ecological high-ductility cementitious composites modified with recycled asphalt concrete. In: Construction and Building Materials, v. 264 (December 2020).
- (2013): On a kinked crack model to describe the influence of material microstructure on fatigue crack growth. In: Frattura ed Integrità Strutturale, v. 7, n. 25 (April 2013).
- (2009): Fatigue life estimation in welded joints under multiaxial loadings. In: Frattura ed Integrità Strutturale, v. 3, n. 9 (July 2009).
- (2015): Investigation of Mode I fracture toughness of red Verona marble after thermal treatment. In: Frattura ed Integrità Strutturale, v. 9, n. 34 (September 2015).
- (2015): Time and frequency domain models for multiaxial fatigue life estimation under random loading. In: Frattura ed Integrità Strutturale, v. 9, n. 33 (June 2015).
- (2015): Interpreting experimental fracture toughness results of quasi-brittle natural materials through multi-parameter approaches. In: Frattura ed Integrità Strutturale, v. 9, n. 33 (June 2015).
- (2017): Effect of spectral cross-correlation on multiaxial fatigue damage: simulations using the critical plane approach. In: Frattura ed Integrità Strutturale, v. 11, n. 41 (June 2017).
- (2017): Fracture toughness of rough and frictional cracks emanating from a re-entrant corner. In: Frattura ed Integrità Strutturale, v. 11, n. 41 (June 2017).
- (2017): Multiaxial fatigue strength of titanium alloys. In: Frattura ed Integrità Strutturale, v. 11, n. 41 (June 2017).
- (2017): Joined application of a multiaxial critical plane criterion and a strain energy density criterion in low-cycle fatigue. In: Frattura ed Integrità Strutturale, v. 11, n. 41 (June 2017).
- (2016): Estimation of fatigue strength under multiaxial cyclic loading by varying the critical plane orientation. In: Frattura ed Integrità Strutturale, v. 10, n. 37 (June 2016).
- (2019): Size-effect independence of particleboard fracture toughness. In: Composite Structures, v. 229 (December 2019).
- (2018): The Generalised Local Model applied to Fibreglass. In: Composite Structures, v. 202 (October 2018).
- (2017): Probabilistic failure assessment of Fibreglass composites. In: Composite Structures, v. 160 (January 2017).
- (2016): Dynamic shieldings for cultural heritage buildings under seismic action. In: Soil Dynamics and Earthquake Engineering, v. 89 (October 2016).
Structurae cooperates with
