Lucie Vandewalle 
- (2024): Numerically optimized post‐cracking branch of the constitutive tensile model for fiber‐reinforced concrete with natural and recycled aggregates. In: Structural Concrete, v. 25, n. 1 (January 2024).
- (2023): Improved simplified constitutive tensile model for fiber‐reinforced concrete. In: Structural Concrete, v. 24, n. 4 (5 July 2023).
- (2019): Assessing the bond behaviour of corroded smooth and ribbed rebars with acoustic emission monitoring. In: Cement and Concrete Research, v. 120 (June 2019).
- (2012): Effect of mechanical activation on the hydraulic properties of stainless steel slags. In: Cement and Concrete Research, v. 42, n. 6 (June 2012).
- (2000): Bond of reinforcement in concrete. fédération internationale du béton (fib), Lausanne (Switzerland).
- (2022): Effect of pre-existing longitudinal and transverse corrosion cracks on the flexural behaviour of corroded RC beams. In: Construction and Building Materials, v. 319 (February 2022).
- (2022): Acoustic emission-based damage analysis of steel fibre reinforced concrete in progressive cyclic uniaxial tension tests. In: Construction and Building Materials, v. 321 (February 2022).
- (2021): An experimental assessment of corrosion damage and bending capacity reduction of singly reinforced concrete beams subjected to accelerated corrosion. In: Construction and Building Materials, v. 286 (June 2021).
- (2021): Sectional analysis of the cyclic behavior of steel fiber reinforced concrete. In: Structural Concrete, v. 22, n. 5 (September 2021).
- (2005): Distribution of steel fibres in rectangular sections. In: Cement and Concrete Composites, v. 27, n. 3 (March 2005).
- (2017): Damage identification using modal strains identified from operational fiber-optic Bragg grating data. In: Structural Health Monitoring, v. 17, n. 6 (December 2017).
- (2021): Sectional analysis of the flexural creep of cracked fiber reinforced concrete. In: Structural Concrete, v. 22, n. 3 (April 2021).
- (1991): Influence of temperature on the cracking in reinforced concrete. Presented at: IABSE Colloquium: Structural Concrete, Stuttgart, Germany, 1991.
- (2021): Monitoring the setting process of alkali-activated slag-fly ash cements with ultrasonic P-wave velocity. In: Construction and Building Materials, v. 271 (February 2021).
- (2020): Autogenous shrinkage of slag-fly ash blends activated with hybrid sodium silicate and sodium sulfate at different curing temperatures. In: Construction and Building Materials, v. 265 (December 2020).
- (2021): Experimental study into the location of the neutral axis in fiber‐reinforced concrete prisms. In: Structural Concrete, v. 22, n. 1 (February 2021).
- (2020): Creep of polymeric fiber reinforced concrete: A numerical model with discrete fiber treatment. In: Computers & Structures, v. 233 (June 2020).
- (1990): Generalization of the failure criterion for concrete. In: IABSE Proceedings, v. 14 ( 1990).
- (2012): Experimental investigation of built-up double-Z members in bending and compression. In: Thin-Walled Structures, v. 53 (April 2012).
- (2012): Numerical study of built-up double-Z members in bending and compression. In: Thin-Walled Structures, v. 60 (November 2012).
- (2006): Ductility of hybrid fiber reinforced concrete. Presented at: IABSE Symposium: Responding to Tomorrow's Challenges in Structural Engineering, Budapest, Hungary, 13-15 September 2006.
- (2019): Early-age hydration and autogenous deformation of cement paste containing flash calcined dredging sediments. In: Construction and Building Materials, v. 200 (March 2019).
- (2014): Effect of curing temperatures on the alkali activation of crystalline continuous casting stainless steel slag. In: Construction and Building Materials, v. 71 (November 2014).
- (2017): Flash-calcined dredging sediment blended cements: effect on cement hydration and properties. In: Materials and Structures, v. 50, n. 6 (December 2017).
- (2012): Selecting creep models using Bayesian methods. In: Materials and Structures, v. 45, n. 10 (October 2012).
- (2009): Fibre reinforced concrete: new design perspectives. In: Materials and Structures, v. 42, n. 9 (November 2009).
- (2011): Monitoring the early-age hydration of self-compacting concrete using ultrasonic p-wave transmission and isothermal calorimetry. In: Materials and Structures, v. 44, n. 8 (October 2011).
- (2015): Experimental investigation on uniaxial tensile creep behavior of cracked steel fiber reinforced concrete. In: Materials and Structures, v. 48, n. 10 (October 2015).
- (2016): Experimental analysis of the shear behaviour of prestressed and reinforced concrete beams. In: European Journal of Environmental and Civil Engineering, v. 22, n. 3 (June 2016).
Structurae cooperates with
