Wim Van Paepegem 
- (2025): Combined computational-experimental investigation of residual stresses and pre-cracking in mode I behaviour of thick adhesively bonded GFRP composite joints. In: Composite Structures, v. 351 (January 2025).
- (2022): X-ray CT based multi-layer unit cell modeling of carbon fiber-reinforced textile composites: Segmentation, meshing and elastic property homogenization. In: Composite Structures, v. 298 (October 2022).
- (2019): Integrated interval Mahalanobis classification system for the quality classification of turbine blades based on vibrational data incorporating measurement uncertainty. In: Structural Health Monitoring, v. 22, n. 1 (November 2019).
- (2022): CNN-DST: Ensemble deep learning based on Dempster–Shafer theory for vibration-based fault recognition. In: Structural Health Monitoring, v. 21, n. 5 (March 2022).
- (2022): Probabilistic ultrasound C-scan imaging of barely visible impact damage in CFRP laminates. In: Composite Structures, v. 284 (March 2022).
- (2022): Phase inversion in (vibro‐)thermal wave imaging of materials: Extracting the AC component and filtering nonlinearity. In: Structural Control and Health Monitoring, v. 29, n. 4 (14 March 2022).
- (2021): Geometrical and deep learning approaches for instance segmentation of CFRP fiber bundles in textile composites. In: Composite Structures, v. 277 (December 2021).
- (2021): A novel multi-classifier information fusion based on Dempster–Shafer theory: application to vibration-based fault detection. In: Structural Health Monitoring, v. 21, n. 2 (May 2021).
- (2021): Broadband nonlinear elastic wave modulation spectroscopy for damage detection in composites. In: Structural Health Monitoring, v. 21, n. 2 (May 2021).
- (2019): The Behavior of Tiled Laminate GFRP Composites, a Class of Robust Materials for Civil Applications. Presented at: IABSE Congress: The Evolving Metropolis, New York, NY, USA, 4-6 September 2019.
- (2021): Quality inspection of complex-shaped metal parts by vibrations and an integrated Mahalanobis classification system. In: Structural Health Monitoring, v. 20, n. 6 (February 2021).
- (2011): Close-range blast loading on empty recyclable metal beverage cans for use in sacrificial cladding structure. In: Engineering Structures, v. 33, n. 6 (June 2011).
- (2019): Performance of frequency and/or phase modulated excitation waveforms for optical infrared thermography of CFRPs through thermal wave radar: A simulation study. In: Composite Structures, v. 225 (October 2019).
- (2018): High-fidelity finite element models of composite wind turbine blades with shell and solid elements. In: Composite Structures, v. 200 (September 2018).
- (2017): Novel composite materials with tunable delamination resistance using functionalizable electrospun SBS fibers. In: Composite Structures, v. 159 (January 2017).
- (2016): Finite element prediction of resin pocket geometries around arbitrary inclusions in composites: Case study for an embedded optical fiber interrogator. In: Composite Structures, v. 146 (June 2016).
- (2015): Non-symmetric stiffness tensor prediction by the Mori–Tanaka scheme – Comments on the article "Effective anisotropic stiffness of inclusions with debonded interface for Eshelby-based models" [Composite Structures 131 (2015) 692–706]. In: Composite Structures, v. 134 (December 2015).
- (2015): Finite element prediction of resin pocket geometry around embedded optical fiber sensors in prepreg composites. In: Composite Structures, v. 132 (November 2015).
- (2015): Effective anisotropic stiffness of inclusions with debonded interface for Eshelby-based models. In: Composite Structures, v. 131 (November 2015).
- (2011): Crushing and energy absorption performance of different geometrical shapes of small-scale glass/polyester composite tubes under quasi-static loading conditions. In: Composite Structures, v. 93, n. 2 (January 2011).
- (2019): Implementation of bending-active elements in kinematic form-active structures – Part I: Design of a representative case study. In: Composite Structures, v. 216 (May 2019).
- (2019): Implementation of bending-active elements in kinematic form-active structures – Part II: Experimental verification. In: Composite Structures, v. 213 (April 2019).
- (2018): Flexural impact response of textile reinforced inorganic phosphate cement composites (TRC). In: Construction and Building Materials, v. 163 (February 2018).
- (2016): Integrated analysis of kinematic form active structures for architectural applications: Experimental verification. In: Engineering Structures, v. 123 (September 2016).
- (2015): Optimization of coating diameter of fiber optic sensors embedded in composite structures under arbitrary loading conditions. In: Smart Materials and Structures, v. 24, n. 11 (November 2015).
- (2012): Condition monitoring of laminated composite sliding bearings using embedded capacitors. In: Smart Materials and Structures, v. 21, n. 10 (October 2012).
- (2016): Integrated analysis of kinematic form active structures for architectural applications: Design of a representative case study. In: Engineering Structures, v. 124 (October 2016).
Structurae cooperates with
