Danny Van Hemelrijck
- (2025): Combined computational-experimental investigation of residual stresses and pre-cracking in mode I behaviour of thick adhesively bonded GFRP composite joints. In: Composite Structures, v. 351 (January 2025).
- (2024): Influence of coating and reinforcement volume fraction on woven basalt TRC: An experimental study. In: Construction and Building Materials, v. 444 (September 2024).
- (2024): The Life Cycle Assessment of Temporary Reusable Membrane Structures: Case Study Analysis.. In: Journal of Building Engineering, v. 94 (October 2024).
- (2024): Air-coupled ultrasonic mapping of stimulated autogenous self-healing and repair effectiveness within concrete mixtures. In: Construction and Building Materials, v. 419 (March 2024).
- (2023): Monitoring the self-healing evolution of cementitious mixtures with superabsorbent polymers through air-coupled ultrasound. In: Construction and Building Materials, v. 408 (December 2023).
- (2023): Effect of matrix modification on the durability of cementitious composites reinforced with aligned Ensete fibre. In: Construction and Building Materials, v. 363 (January 2023).
- (2022): Evaluation of self-healing in cementitious materials with superabsorbent polymers through ultrasonic mapping. In: Construction and Building Materials, v. 344 (August 2022).
- (2016): Monitoring the failure mechanisms of a reinforced concrete beam strengthened by textile reinforced cement using acoustic emission and digital image correlation. In: Smart Structures and Systems, v. 17, n. 1 (January 2016).
- (2022): Tensile Performance of Textile-Reinforced Concrete after Fire Exposure: Experimental Investigation and Analytical Approach. In: Journal of Composites for Construction, v. 26, n. 1 (February 2022).
- (2021): Mechanical behavior of cement composites reinforced by aligned Enset fibers. In: Construction and Building Materials, v. 304 (October 2021).
- (2015): Crack sealing and damage recovery monitoring of a concrete healing system using embedded piezoelectric transducers. In: Structural Health Monitoring, v. 14, n. 5 (March 2015).
- (2015): Feasibility study on integrated structural health monitoring system produced by metal three-dimensional printing. In: Structural Health Monitoring, v. 14, n. 6 (September 2015).
- (2011): Close-range blast loading on empty recyclable metal beverage cans for use in sacrificial cladding structure. In: Engineering Structures, v. 33, n. 6 (June 2011).
- (2020): Digital image correlation assisted characterization of Mode I fatigue delamination in composites. In: Composite Structures, v. 253 (December 2020).
- (2019): Quasi-static crush modelling of carbon/epoxy composites with discontinuous Galerkin/anisotropic extrinsic cohesive law method. In: Composite Structures, v. 230 (December 2019).
- (2019): Experimental investigation of energy absorption behaviour of circular carbon/epoxy composite tubes under quasi-static and dynamic crush loading. In: Composite Structures, v. 227 (November 2019).
- (2018): Evaluation of microdamage initiation in Z-pinned laminates by means of automated RVE computations. In: Composite Structures, v. 206 (December 2018).
- (2011): Crushing and energy absorption performance of different geometrical shapes of small-scale glass/polyester composite tubes under quasi-static loading conditions. In: Composite Structures, v. 93, n. 2 (January 2011).
- (2019): Implementation of bending-active elements in kinematic form-active structures – Part I: Design of a representative case study. In: Composite Structures, v. 216 (May 2019).
- (2019): Implementation of bending-active elements in kinematic form-active structures – Part II: Experimental verification. In: Composite Structures, v. 213 (April 2019).
- (2020): Combined use of superabsorbent polymers and nanosilica for reduction of restrained shrinkage and strength compensation in cementitious mortars. In: Construction and Building Materials, v. 251 (August 2020).
- (2020): Experimental and numerical evaluation of textile reinforced cement (TRC) sandwich walls in compression: A geometrical study. In: Construction and Building Materials, v. 240 (April 2020).
- (2019): Feasibility study on real-scale, self-healing concrete slab by developing a smart capsules network and assessed by a plethora of advanced monitoring techniques. In: Construction and Building Materials, v. 228 (December 2019).
- (2019): Concrete fracture toughness increase by embedding self-healing capsules using an integrated experimental approach. In: Construction and Building Materials, v. 218 (September 2019).
- (2016): Comparison of different approaches for self-healing concrete in a large-scale lab test. In: Construction and Building Materials, v. 107 (March 2016).
- (2016): Assessment of Acoustic Emission localization accuracy on damaged and healed concrete. In: Construction and Building Materials, v. 129 (December 2016).
- (2019): Quantification of progressive structural integrity loss in masonry with Acoustic Emission-based damage classification. In: Construction and Building Materials, v. 194 (January 2019).
- (2016): Integrated analysis of kinematic form active structures for architectural applications: Experimental verification. In: Engineering Structures, v. 123 (September 2016).
- (2016): Integrated analysis of kinematic form active structures for architectural applications: Design of a representative case study. In: Engineering Structures, v. 124 (October 2016).
- (2017): Sandwich panels with Textile Reinforced Cementitious skins as new insulating wall system: a case study. Presented at: Interfaces: Architecture, Engineering, Science, Annual Meeting of the International Association of Shell & Spatial Structures (IASS), Hamburg, 25-27 September 2017.
Structurae cooperates with
