Tamon Ueda 
- (2024): Flexural performance of narrow RC beams hybrid strengthened by TRECC plate. In: Engineering Structures, v. 319 (November 2024).
- (2024): Fatigue performance of prefabricated composite T‐beams under cyclic overloading: An experimental study. In: Structural Concrete, v. 25, n. 3 (13 May 2024).
- (2023): Investigating the fracture behavior of structural concrete shear key in prefabricated walls by discrete modeling. In: Construction and Building Materials, v. 397 (September 2023).
- (2023): Mesoscale discrete analysis of mechanical properties of recycled aggregate concrete based on Voronoi mesh. In: Construction and Building Materials, v. 370 (March 2023).
- (2023): Meso-scale computational modeling of the fracture of concrete with complex shaped aggregates under the self-restraint stress. In: Composite Structures, v. 303 (January 2023).
- (2022): Guide for Strengthening of Concrete Structures. fédération internationale du béton (fib), Lausanne (Switzerland), ISBN 978-2-88394-157-1.
- (2022): Material comparative analysis of crack-bridging degradation of SFRC structural beams under flexural fatigue loading. In: Construction and Building Materials, v. 339 (July 2022).
- (1995): Finite Element Analysis On Shear Resisting Mechanism Of Concrete Beams With Shear Reinforcement. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1995, n. 520 (August 1995).
- (1999): Fretting Fatigue Characteristics In The Curved Layout Of Large-capacity Prestressing Strands. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1999, n. 627 (August 1999).
- (2000): Fundamental Study On Bond Mechanism Of Carbon Fiber Sheet. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2000, n. 648 (May 2000).
- (2020): Flexural performance of corroded continuous RC beams rehabilitated by ICCP-SS. In: Composite Structures, v. 232 (January 2020).
- (2019): Influence of continuous and cyclic temperature durations on the performance of polymer cement mortar and its composite with concrete. In: Composite Structures, v. 215 (May 2019).
- (2020): Generalized Evaluation of Bond Behavior of the Externally Bonded FRP Reinforcement to Concrete. In: Journal of Composites for Construction, v. 24, n. 6 (December 2020).
- (2018): The ICCP-SS technique for retrofitting reinforced concrete compressive members subjected to corrosion. In: Construction and Building Materials, v. 167 (April 2018).
- (2011): Mesoscale simulation of chloride diffusion in concrete considering the binding capacity and concentration dependence. In: Computers and Concrete, v. 8, n. 2 (April 2011).
- (2013): Fracture Mechanisms of Polymer Cement Mortar: Concrete Interfaces. In: Journal of Engineering Mechanics (ASCE), v. 139, n. 2 (February 2013).
- (2019): Mesoscale simulation of bond behaviors between concrete and reinforcement under the effect of frost damage with axisymmetric Rigid Body Spring Model. In: Construction and Building Materials, v. 215 (August 2019).
- (2011): Intermediate Crack Debonding of Polymer Cement Mortar Overlay-Strengthened RC Beam. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 6 (June 2011).
- (2014): Mesoscale Modeling of Chloride Penetration in Unsaturated Concrete Damaged by Freeze-Thaw Cycling. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 5 (May 2014).
- (2016): In-Plane Shear Performance of Masonry Walls after Strengthening by Two Different FRPs. In: Journal of Composites for Construction, v. 20, n. 5 (October 2016).
- (2016): Investigation on concrete-PCM interface under elevated temperature: At material level and member level. In: Construction and Building Materials, v. 125 (October 2016).
- (2017): Mesoscale simulation of concrete behavior with non-uniform frost damage with verification by CT imaging. In: Construction and Building Materials, v. 157 (December 2017).
- (2014): Investigation of The Bond Behaviour Between PBO-FRCM Strengthening Material and Concrete. In: Journal of Advanced Concrete Technology, v. 12, n. 12 ( 2014).
- (2013): Meso-scale Mechanical Model for Mortar Deformation under Freeze Thaw Cycles. In: Journal of Advanced Concrete Technology, v. 11, n. 2 ( 2013).
- (2011): Mesoscale Modelling of the Chloride Diffusion in Cracks and Cracked Concrete. In: Journal of Advanced Concrete Technology, v. 9, n. 3 ( 2011).
- (2009): Fatigue Degradation Properties of PCM-concrete Interface. In: Journal of Advanced Concrete Technology, v. 7, n. 3 ( 2009).
- (2009): Fracture Criterion for Carbon Fiber Reinforced Polymer Sheet to Concrete Interface Subjected to Coupled Pull-Out and Push-Off Actions. In: Advances in Structural Engineering, v. 12, n. 5 (October 2009).
- (2009): A Hybrid Bonding System for Improving the Structural Performance of FRP Flexurally Strengthened Concrete Beams. In: Advances in Structural Engineering, v. 12, n. 6 (December 2009).
- (2016): Interfacial Tensile Bond between Substrate Concrete and Repairing Mortar under Freeze-Thaw Cycles. In: Journal of Advanced Concrete Technology, v. 14, n. 8 ( 2016).
- (2011): International code harmonization: the role of the Asian Concrete Model Code. In: Structural Concrete, v. 12, n. 1 (March 2011).
Structurae cooperates with
