Jiyuan Tu 
- (2023): Numerical study of the performance for a curved double-skin façade in summer. In: Building and Environment, v. 233 (April 2023).
- (2022): Evaporation flow characteristics of respiratory droplets: Dynamic property under multifarious ambient conditions. In: Building and Environment, v. 221 (August 2022).
- (2022): Numerical investigation of pilots’ micro-environment in an airliner cockpit. In: Building and Environment, v. 217 (June 2022).
- (2022): CFD analysis of environmental impacts on a thermochromic smart window. In: Energy and Buildings, v. 263 (May 2022).
- (2014): CFD study of the effects of furniture layout on indoor air quality under typical office ventilation schemes. In: Building Simulation, v. 7, n. 3 (March 2014).
- (2015): Improving predictions of heat transfer in indoor environments with eddy viscosity turbulence models. In: Building Simulation, v. 9, n. 2 (December 2015).
- (2016): Numerical investigations of the effects of manikin simplifications on the thermal flow field in indoor spaces. In: Building Simulation, v. 10, n. 2 (November 2016).
- (2017): Multi-objective optimization of HVAC system using NSPSO and Kriging algorithms—A case study. In: Building Simulation, v. 10, n. 5 (May 2017).
- (2019): Numerical modeling of thermal response of a ground heat exchanger with single U-shaped tube. In: Science and Technology for the Built Environment, v. 25, n. 5 (28 May 2019).
- (2019): Heat exchangers in the built environment. In: Science and Technology for the Built Environment, v. 25, n. 5 (28 May 2019).
- (2017): A new temperature treatment method of near-space crew capsule using phase change material. In: Science and Technology for the Built Environment, v. 23, n. 3 (February 2017).
- (2016): Effects of passenger thermal plume on the transport and distribution characteristics of airborne particles in an airliner cabin section. In: Science and Technology for the Built Environment, v. 22, n. 2 (January 2016).
- (2012): Improvement of energy efficiency for an open-loop surface water source heat pump system via optimal design of water-intake. In: Energy and Buildings, v. 51 (August 2012).
- (2014): Design configuration for a higher efficiency air conditioning system in large space building. In: Energy and Buildings, v. 72 (April 2014).
- (2016): Evaluation of manikin simplification methods for CFD simulations in occupied indoor environments. In: Energy and Buildings, v. 127 (September 2016).
- (2017): Overall performance evaluation of underfloor air distribution system with different heights of return vents. In: Energy and Buildings, v. 147 (July 2017).
- (2018): An integrated predictive model of the long-term performance of ground source heat pump (GSHP) systems. In: Energy and Buildings, v. 159 (January 2018).
- (2019): Evaluation of the eddy viscosity turbulence models for the simulation of convection–radiation coupled heat transfer in indoor environment. In: Energy and Buildings, v. 184 (February 2019).
- (2020): Evaluation of cough-jet effects on the transport characteristics of respiratory-induced contaminants in airline passengers’ local environments. In: Building and Environment, v. 183 (October 2020).
- (2020): Indoor particle inhalability of a stationary and moving manikin. In: Building and Environment, v. 169 (February 2020).
- (2019): Characterisation and analysis of indoor tornado for contaminant removal and emergency ventilation. In: Building and Environment, v. 164 (October 2019).
- (2019): Multi-objective optimization for designing of high-speed train cabin ventilation system using particle swarm optimization and multi-fidelity Kriging. In: Building and Environment, v. 155 (May 2019).
- (2018): Evaluation of models and methods to simulate thermal radiation in indoor spaces. In: Building and Environment, v. 144 (October 2018).
- (2018): Experimental visualisation of wake flows induced by different shaped moving manikins. In: Building and Environment, v. 142 (September 2018).
- (2018): Modelling of evaporation of cough droplets in inhomogeneous humidity fields using the multi-component Eulerian-Lagrangian approach. In: Building and Environment, v. 128 (January 2018).
- (2017): Evaluation of airborne disease infection risks in an airliner cabin using the Lagrangian-based Wells-Riley approach. In: Building and Environment, v. 121 (August 2017).
- (2015): An Eulerian–Eulerian model for particulate matter transport in indoor spaces. In: Building and Environment, v. 86 (April 2015).
- (2013): Numerical investigation of particle transport and inhalation using standing thermal manikins. In: Building and Environment, v. 60 (February 2013).
- (2013): Numerical study of the effects of human body heat on particle transport and inhalation in indoor environment. In: Building and Environment, v. 59 (January 2013).
- (2017): A numerical investigation of wind environment around a walking human body. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 168 (September 2017).
Structurae cooperates with
