Keh-Chyuan Tsai
- (2018): Seismic performance analysis of BRBs and gussets in a full-scale 2-story BRB-RCF specimen. In: Earthquake Engineering and Structural Dynamics, v. 47, n. 12 (10 October 2018).
- (2014): High-strength RC columns subjected to high-axial and increasing cyclic lateral loads. In: Earthquakes and Structures, v. 7, n. 5 (November 2014).
- (2011): Recent Experimental Researches on Steel Plate Shear Walls in NCREE. Presented at: Structures Congress 2011, Las Vegas, Nevada, April 14-16, 2011.
- (2015): Real-valued modal response history analysis for asymmetric-plan buildings with nonlinear viscous dampers. In: Soil Dynamics and Earthquake Engineering, v. 77 (October 2015).
- (2019): Optimization Approach to Uniformly Distributed Peak Interstory Drifts along Building Heights. In: Journal of Structural Engineering (ASCE), v. 145, n. 5 (May 2019).
- (2012): Investigation of the seismic response of three-story special concentrically braced frames. In: Journal of Constructional Steel Research, v. 77 (October 2012).
- (2008): Seismic Analysis of Non Proportionally Damped Two-Way Asymmetric Elastic Buildings Under Bi-Directional Seismic Ground Motions. In: Journal of Earthquake Engineering, v. 12, n. 7 ( 2008).
-
(1998): Improved time integration for pseudodynamic tests. In: Earthquake Engineering and Structural Dynamics, v. 27, n. 7 (July 1998).
https://doi.org/10.1002/(sici)1096-9845(199807)27:7<711::aid-eqe753>3.0.co;2-6
- (2017): Hybrid experimental performance of a full-scale two-story buckling-restrained braced RC frame. In: Earthquake Engineering and Structural Dynamics, v. 46, n. 8 (10 July 2017).
- (2016): Seismic design and testing of buckling-restrained braces with a thin profile. In: Earthquake Engineering and Structural Dynamics, v. 45, n. 3 (March 2016).
- (2015): Seismic design and experiment of single and coupled corner gusset connections in a full-scale two-story buckling-restrained braced frame. In: Earthquake Engineering and Structural Dynamics, v. 44, n. 13 (25 October 2015).
- (2015): Precast concrete wall with end columns (PreWEC) for earthquake resistant design. In: Earthquake Engineering and Structural Dynamics, v. 44, n. 12 (10 October 2015).
- (2015): Retrofit of reinforced concrete frames with buckling-restrained braces. In: Earthquake Engineering and Structural Dynamics, v. 44, n. 1 (January 2015).
- (2014): Seismic design and testing of the bottom vertical boundary elements in steel plate shear walls. Part 2: experimental studies. In: Earthquake Engineering and Structural Dynamics, v. 43, n. 14 (November 2014).
- (2002): Plasticity-fibre model for steel triangular plate energy dissipating devices. In: Earthquake Engineering and Structural Dynamics, v. 31, n. 9 (September 2002).
- (2014): Real-time hybrid testing of a smart base isolation system. In: Earthquake Engineering and Structural Dynamics, v. 43, n. 1 (June 2014).
- (2014): High-mode buckling responses of buckling-restrained brace core plates. In: Earthquake Engineering and Structural Dynamics, v. 43, n. 3 (February 2014).
- (2014): Seismic design and test of gusset connections for buckling-restrained braced frames. In: Earthquake Engineering and Structural Dynamics, v. 43, n. 4 (March 2014).
- (2018): Parameter identification for on-line model updating in hybrid simulations using a gradient-based method. In: Earthquake Engineering and Structural Dynamics, v. 47, n. 2 (February 2018).
- (2011): Influence of gusset plate connections and braces on the seismic performance of X-braced frames. In: Earthquake Engineering and Structural Dynamics, v. 40, n. 4 (10 April 2011).
- (2012): Seismic design and hybrid tests of a full-scale three-story buckling-restrained braced frame using welded end connections and thin profile. In: Earthquake Engineering and Structural Dynamics, v. 41, n. 5 (25 April 2012).
- (2008): Pseudo-dynamic test of a full-scale CFT/BRB frame—Part II: Seismic performance of buckling-restrained braces and connections. In: Earthquake Engineering and Structural Dynamics, v. 37, n. 7 (June 2008).
- (2008): Pseudo-dynamic tests of a full-scale CFT/BRB frame—Part I: Specimen design, experiment and analysis. In: Earthquake Engineering and Structural Dynamics, v. 37, n. 7 (June 2008).
- (2008): Seismic analysis of two-way asymmetric building systems under bi-directional seismic ground motions. In: Earthquake Engineering and Structural Dynamics, v. 37, n. 2 (February 2008).
- (2009): Seismic performance evaluation of a 34-story steel building retrofitted with response modification elements. In: Earthquake Engineering and Structural Dynamics, v. 38, n. 6 (May 2009).
- (2007): ISEE: Internet-based Simulation for Earthquake Engineering—Part II: The application protocol approach. In: Earthquake Engineering and Structural Dynamics, v. 36, n. 15 (December 2007).
- (2007): ISEE: Internet-based Simulation for Earthquake Engineering—Part I: Database approach. In: Earthquake Engineering and Structural Dynamics, v. 36, n. 15 (December 2007).
- (2009): Seismic History Analysis of Asymmetric Buildings with Soil–Structure Interaction. In: Journal of Structural Engineering (ASCE), v. 135, n. 2 (February 2009).
- (1989): On seismic steel joints and connections. In: Engineering Structures, v. 11, n. 3 (July 1989).
- (2014): Seismic design and testing of the bottom vertical boundary elements in steel plate shear walls. Part 1: design methodology. In: Earthquake Engineering and Structural Dynamics, v. 43, n. 15 (December 2014).
Structurae cooperates with
