Roberto Tomasi 
- (2024): Effect of partition walls on the vibration serviceability of cross-laminated timber floors. In: Journal of Building Engineering, v. 95 (October 2024).
- (2024): Aleatoric and epistemic uncertainty in the overstrength of CLT-to-CLT screwed connections. In: Engineering Structures, v. 304 (April 2024).
- (2023): Buckling capacity model for timber screws loaded in compression: Experimental, analytical and FE investigations. In: Construction and Building Materials, v. 379 (May 2023).
- (2023): Analysis and enhancement of the new Eurocode 5 formulations for the lateral elastic deformation of LTF and CLT walls. In: Structures, v. 47 (January 2023).
- (2023): Experimental investigation on screw reinforcement of timber members under compression perpendicular to the grain. In: Engineering Structures, v. 275 (January 2023).
- (2023): Probabilistic friction model for aluminium–steel Asymmetric Friction Connections (AFC). In: Engineering Structures, v. 274 (January 2023).
- (2022): Experimental and analytical study of Friction Connection for seismic retrofit with Cross‐Laminated Timber (CLT) panels. In: Earthquake Engineering and Structural Dynamics, v. 51, n. 14 (November 2022).
- (2022): Experimental Cyclic Response of a Novel Friction Connection for Seismic Retrofitting of RC Buildings with CLT Panels. In: Journal of Structural Engineering (ASCE), v. 148, n. 5 (May 2022).
- (2022): Design of a novel seismic retrofitting system for RC structures based on asymmetric friction connections and CLT panels. In: Engineering Structures, v. 254 (March 2022).
- (2021): Dynamic Characterization of Timber Floor Subassemblies: Sensitivity Analysis and Modeling Issues. In: Journal of Structural Engineering (ASCE), v. 147, n. 12 (December 2021).
- (2019): Assessment of the connection properties of a prefabricated wooden sandwich panel under static and cyclic loads. Presented at: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (2020): Assessment of ductility properties of the connections in a prefabricated timber panel. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 173, n. 12 (December 2020).
- (2020): Dynamic identification and model updating of an eight-storey CLT building. In: Engineering Structures, v. 213 (June 2020).
- (2019): Cross Laminated Timber (CLT) Beams Loaded in Plane: Testing Stiffness and Shear Strength. In: Frontiers in Built Environment, v. 5 (November 2019).
- (2019): Evaluation of the displacement ductility for the seismic design of light-frame wood buildings. In: Bulletin of Earthquake Engineering, v. 17, n. 9 (July 2019).
- (2019): Picture frame and diagonal compression testing of cross-laminated timber. In: Materials and Structures, v. 52, n. 4 (June 2019).
- (2015): Experimental Characterization of Monotonic and Cyclic Loading Responses of CLT Panel-To-Foundation Angle Bracket Connections. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 6 (June 2015).
- (2013): Mechanical behaviour of connections between wood framed shear walls and foundations under monotonic and cyclic load. In: Construction and Building Materials, v. 44 (July 2013).
- (2016): Comparison of multi-storey cross-laminated timber and timber frame buildings by in situ modal analysis. In: Construction and Building Materials, v. 102 (January 2016).
- (2016): Proposal of an analytical procedure and a simplified numerical model for elastic response of single-storey timber shear-walls. In: Construction and Building Materials, v. 102 (January 2016).
- (2016): A predictive analytical model for the elasto-plastic behaviour of a light timber-frame shear-wall. In: Construction and Building Materials, v. 102 (January 2016).
- (2016): Analysis of timber log-house construction system via experimental testing and analytical modelling. In: Construction and Building Materials, v. 102 (January 2016).
- (2011): Ductile moment-resistant steel–timber connections. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 164, n. 2 (April 2011).
- (2011): Ductility of timber joints under static and cyclic loads. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 164, n. 2 (April 2011).
- (2013): Experimental investigation on sheathing-to-framing connections in wood shear walls. In: Engineering Structures, v. 56 (November 2013).
- (2015): Field Testing of Flexible Timber Diaphragms in an Existing Vintage URM Building. In: Journal of Structural Engineering (ASCE), v. 141, n. 1 (January 2015).
- (2009): Ductile Design of Glued-Laminated Timber Beams. In: Practice Periodical on Structural Design and Construction, v. 14, n. 3 (August 2009).
- (2016): Bemessung von Gebäuden in Brettsperrholzbauweise unter Erdbebenbeanspruchung. In: Bautechnik, v. 93, n. 12 (December 2016).
- (2008): Ductile End Connections for Glulam Beams. In: Structural Engineering International, v. 18, n. 3 (August 2008).
- (2001): Behavior analysis of axially loaded glued-in timber-steel joints. Presented at: IABSE Conference: Innovative Wooden Structures and Bridges, Lahti, Finnland, 29-31 August 2001.
Structurae cooperates with
