Luping Tang 
- (2023): Experimental study on chloride ion diffusion behavior and microstructure in concrete under alternating ambient humidity conditions. In: Construction and Building Materials, v. 401 (October 2023).
- (2019): Interaction mechanisms between organic and inorganic phases in calcium silicate hydrates/poly(vinyl alcohol) composites. In: Cement and Concrete Research, v. 125 (November 2019).
- (2023): Long-term (2 years) drying shrinkage evaluation of alkali-activated slag mortar: Experiments and partial factor analysis. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2022): Effects of different supplementary cementitious materials on the performance and environment of eco-friendly mortar prepared from waste incineration bottom ash. In: Construction and Building Materials, v. 356 (November 2022).
- (2022): Application potential analysis of biochar as a carbon capture material in cementitious composites: A review. In: Construction and Building Materials, v. 350 (October 2022).
- (2022): Long-term field exposure of structural concretes in marine environment: state-of-the-art review by RILEM TC 289-DCM. In: Materials and Structures, v. 55, n. 7 (5 August 2022).
- (2022): An experimental study on the influence of continuous ambient humidity conditions on relative humidity changes, chloride diffusion and microstructure in concrete. In: Journal of Building Engineering, v. 59 (November 2022).
- (2022): Mechanics, hydration phase and pore development of embodied energy and carbon composites based on ultrahigh-volume low-carbon cement with limestone calcined clay. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Co-utilization of quarry tailings and fly ash for non-sintered ultra-lightweight aggregates (ULWAs) by autoclave technology. In: Construction and Building Materials, v. 346 (September 2022).
- (2021): Influence of deicing salt on the surface properties of concrete specimens after 20 years. In: Construction and Building Materials, v. 295 (August 2021).
- (2021): Influence of moisture content on the contact-hardening properties of calcium silicate hydrate by direct compression. In: Construction and Building Materials, v. 278 (April 2021).
- (2022): Electrically driven ionic transport in the RCM and RIM: Investigations based on experiments and numerical simulations. In: Construction and Building Materials, v. 331 (May 2022).
- (2022): Effects of Temperature on Corrosion Behavior of Reinforcements in Simulated Sea-Sand Concrete Pore Solution. In: Buildings, v. 12, n. 4 (11 April 2022).
- (2022): Alkali-activated binders based on incinerator bottom ash combined with limestone-calcined clay or fly ash. In: Construction and Building Materials, v. 320 (February 2022).
- (2022): Assessment of compositional changes of carbonated cement pastes subjected to high temperatures using in-situ Raman mapping and XPS. In: Journal of Building Engineering, v. 45 (January 2022).
- (2021): Chloride penetration in freeze–thaw induced cracking concrete: A numerical study. In: Construction and Building Materials, v. 302 (October 2021).
- (2021): Durability of Slag–Cement Paste Containing Polyaluminum Chloride. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 9 (September 2021).
- (2020): Changes in chemical phases and microscopic characteristics of fly ash blended cement pastes in different CO2 concentrations. In: Construction and Building Materials, v. 257 (October 2020).
- (2021): Modelling analysis of chloride redistribution in sea-sand concrete exposed to atmospheric environment. In: Construction and Building Materials, v. 274 (March 2021).
- (2020): FShrinkage behaviour, early hydration and hardened properties of sodium silicate activated slag incorporated with gypsum and cement. In: Construction and Building Materials, v. 248 (July 2020).
- (2020): Determining influence of impressed current density on current efficiency with X-ray micro-computed tomography. In: Construction and Building Materials, v. 246 (June 2020).
- (2019): Experiences from RILEM TC 235-CTC in recommending a test method for chloride threshold values in concrete. In: RILEM Technical Letters, v. 3 (April 2019).
- (2020): Improving the chloride binding capacity of cement paste by adding nano-Al2O3: The cases of blended cement pastes. In: Construction and Building Materials, v. 232 (January 2020).
- (2019): Investigating the influence of fly ash on the hydration behavior of cement using an electrochemical method. In: Construction and Building Materials, v. 222 (October 2019).
- (2013): Chloride profiles along the concrete-steel interface. In: International Journal of Structural Engineering, v. 4, n. 1 ( 2013).
- (2013): An approach for measurement of chloride threshold values. In: International Journal of Structural Engineering, v. 4, n. 1 ( 2013).
- (2014): Influence of inorganic admixtures on the 11Å-tobermorite formation prepared from steel slags: XRD and FTIR analysis. In: Construction and Building Materials, v. 60 (June 2014).
- (2017): Influence of drying conditions on the contact-hardening behaviours of calcium silicate hydrate powder. In: Construction and Building Materials, v. 136 (April 2017).
- (2016): Development of an electro-chemical accelerated ageing method for leaching of calcium from cementitious materials. In: Materials and Structures, v. 49, n. 1-2 (January 2016).
- (2015): The influence of reinforcement steel surface condition on initiation of chloride induced corrosion. In: Materials and Structures, v. 48, n. 8 (August 2015).
Structurae cooperates with
