Wei Tan 
- (2024): Bond mechanism of grout sleeve splicing for steel-FRP composite bar and pullout behavior of the bar with anchor head in concrete. In: Construction and Building Materials, v. 450 (November 2024).
- (2025): Effect of tie parameters on strength and ductility of concrete columns reinforced with hybrid steel-fiber reinforced polymer (FRP) composite bars. In: Engineering Structures, v. 322 (January 2025).
- (2024): Flexural capacity and failure trend of fiber and steel reinforcement reinforced cement stabilized rammed earth beams. In: Structures, v. 68 (October 2024).
- (2024): Pullout behavior of the steel-FRP composite bar with the anchor head made of the grout-filled steel tube. In: Composite Structures, v. 341 (August 2024).
- (2024): Study on the bond-slip behavior between steel bar and rammed earth. In: Journal of Building Engineering, v. 90 (August 2024).
- (2024): Seismic performance of rammed earth walls with embedded steel wire mesh or bamboo reinforcement mesh. In: Structures, v. 65 (July 2024).
- (2024): Experimental study on bond performance between vertical deformed steel bar and modern rammed earth based on in-situ pull-out test. In: Construction and Building Materials, v. 425 (April 2024).
- (2024): Grout sleeve splicing of steel-fiber reinforced polymer composite bars: Tensile behavior and bond mechanism. In: Construction and Building Materials, v. 425 (April 2024).
- (2024): Design and analysis of a galloping-based piezoelectric energy harvester with coupled magnetism. In: Smart Materials and Structures, v. 33, n. 2 (4 January 2024).
- (2024): Axial compression behavior of seawater sea-sand concrete columns reinforced with SFCBs and closed-type winding GFRP ties. In: Construction and Building Materials, v. 416 (February 2024).
- (2024): Self-adaptive Modelling Method for Chinese Ancient Timber Architecture Based on Digital Structure Metamodel. In: Nexus Network Journal, v. 26, n. 1 (January 2024).
- (2023): Near-surface-mounted retrofitting of adobe walls using different materials: Evaluation of seismic performance. In: Structures, v. 54 (August 2023).
- (2023): Evaluation of compressive strength of cement-stabilized rammed earth wall by ultrasonic-rebound combined method. In: Journal of Building Engineering, v. 68 (June 2023).
- (2023): Modelling fatigue behaviours and lifetimes of novel GLARE laminates under random loading spectrum. In: Composite Structures, v. 311 (May 2023).
- (2023): Investigation of intralayer and interlayer shear properties of stabilized rammed earth by direct shear tests. In: Construction and Building Materials, v. 367 (February 2023).
- (2022): Modular multistable metamaterials with reprogrammable mechanical properties. In: Engineering Structures, v. 272 (December 2022).
- (2022): Phase field fracture predictions of microscopic bridging behaviour of composite materials. In: Composite Structures, v. 286 (April 2022).
- (2021): Seismic performance of new adobe bricks masonry: Design and experiment. In: Advances in Structural Engineering, v. 25, n. 2 (December 2021).
- (2023): Study on the Combination Measurement of Rockfall Embankments and Rock Shed on Steep Slopes. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, v. 176, n. 4 (August 2023).
- (2021): Shaking table tests on seismic response of discontinuous suspended ceilings. In: Journal of Building Engineering, v. 43 (November 2021).
- (2021): Progressive damage modelling and fatigue life prediction of Plain-weave composite laminates with Low-velocity impact damage. In: Composite Structures, v. 273 (October 2021).
- (2017): Modeling the Effects of Speed Limit, Acceleration, and Deceleration on Overall Delay and Traffic Emission at a Signalized Intersection. In: Journal of Transportation Engineering, Part A: Systems, v. 143, n. 12 (December 2017).
- (2020): Rapid prediction method of failure load for hygrothermally aged CFRP – Aluminum alloy single lap joints. In: Composite Structures, v. 252 (November 2020).
- (2017): Comment on "A tensorial based progressive damage model for fibre reinforced polymers". In: Composite Structures, v. 176 (September 2017).
- (2016): The role of material characterisation in the crush modelling of thermoplastic composite structures. In: Composite Structures, v. 153 (October 2016).
- (2019): Compressive failure of woven fabric reinforced thermoplastic composites with an open-hole: An experimental and numerical study. In: Composite Structures, v. 213 (April 2019).
- (2019): Assessment of failure criteria and damage evolution methods for composite laminates under low-velocity impact. In: Composite Structures, v. 207 (January 2019).
- (2020): Vibration mode and velocity interference mechanism of tandem cylinders at subcritical Reynolds number. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 199 (April 2020).
- (2014): Theoretical prediction and crashworthiness optimization of multi-cell triangular tubes. In: Thin-Walled Structures, v. 82 (September 2014).
Structurae cooperates with
