Ping Tan 
- (2024): Novel multi-degree-of-freedom force–displacement mixed control framework for low loading rate substructure hybrid testing. In: Soil Dynamics and Earthquake Engineering, v. 186 (November 2024).
- (2024): Multi-performance oriented seismic design of viscoelastic dampers for structural retrofitting. In: Journal of Building Engineering, v. 86 (June 2024).
- (2023): Mechanism study on the effect of floor rotation angle on supported tuned mass damper system of high-rise structure. In: Structures, v. 58 (December 2023).
- (2024): Prediction of nonlinear seismic demand of inter-story isolated systems using improved multi-modal pushover analysis procedures. In: Journal of Building Engineering, v. 82 (April 2024).
- (2024): Optimal design of tuned inerter negative stiffness dampers with linear viscous and nonlinear eddy current damping for structural effective damping ratio enhancement. In: Soil Dynamics and Earthquake Engineering, v. 176 (January 2024).
- (2023): A novel tuned mass damper inerter: optimal design, effectiveness comparison, and robustness investigation. In: Structures, v. 55 (September 2023).
- (2023): Optimal design method of the load-level isolation system for industrial steel racking. In: Journal of Constructional Steel Research, v. 210 (November 2023).
- (2023): A novel tuned inerter eddy current damper: modeling, optimization, and evaluation. In: Engineering Structures, v. 285 (June 2023).
- (2023): Multi-objective optimization of the inter-story isolation system used as a structural TMD. In: Bulletin of Earthquake Engineering, v. 21, n. 5 (February 2023).
- (2023): Improved three-variable control for electromagnetic mass damper system considering control-structure interaction. In: International Journal of Structural Stability and Dynamics, v. 23, n. 19 (March 2023).
- (2023): Numerical Investigations of Asymmetric Inerter Nonlinear Energy Sink for Vibration Control. In: International Journal of Structural Stability and Dynamics, v. 23, n. 13 (February 2023).
- (2022): Multi‐stage superelastic variable stiffness pendulum isolation system for seismic response control of bridges under near‐fault earthquakes. In: Structural Control and Health Monitoring, v. 29, n. 12 (5 October 2022).
- (2022): Life cycle resilience assessment of RC frame structures considering multiple-hazard. In: Structures, v. 44 (October 2022).
- (2022): Numerical modeling and experimental validation of Sliding-LRBs considering hysteretic strength degradation. In: Engineering Structures, v. 262 (July 2022).
- (2022): Performance-Based Compositive Passive Control Analysis of Multi-Tower Building with Chassis: Optimization of Kelvin-Voigt Dampers. In: Buildings, v. 12, n. 2 (18 January 2022).
- (2022): Optimal design of tuned viscous mass damper for acceleration response control of civil structures under seismic excitations. In: Engineering Structures, v. 252 (February 2022).
- (2022): Performance of seismically isolated buildings with variable friction pendulum bearings under near-fault ground motions. In: Journal of Building Engineering, v. 45 (January 2022).
- (2021): Performance evaluation of multiple tuned inerter‐based dampers for seismic induced structural vibration control. In: Structural Control and Health Monitoring, v. 29, n. 1 (October 2021).
- (2021): A new nonlinear model to describe the degradation law of the mechanical properties of lead‐rubber bearings under high‐speed horizontal loading. In: Structural Control and Health Monitoring, v. 28, n. 12 (September 2021).
- (2021): Investigations on a mega–sub isolation system under near-fault ground motions. In: Advances in Structural Engineering, v. 24, n. 15 (July 2021).
- (2021): Optimal design of TVMD with linear and nonlinear viscous damping subjected to white‐noise excitation. In: Structural Control and Health Monitoring, v. 28, n. 4 (January 2021).
- (1999): Micromechanics models for the elastic constants and failure strengths of plain weave composites. In: Composite Structures, v. 47, n. 1-4 (December 1999).
- (2002): Investigation of loading assumptions on the effective electroelastic constants for PFRC materials. In: Composite Structures, v. 57, n. 1-4 (July 2002).
- (2002): A one-dimensional model for non-linear behaviour of piezoelectric composite materials. In: Composite Structures, v. 58, n. 4 (December 2002).
- (2020): Performance-based dynamic optimal design for isolated structures with multiple-coupling friction dampers. In: Advances in Structural Engineering, v. 23, n. 10 (February 2020).
- (2020): Mechanical performance and shear constitutive model study of a new high-capacity polyurethane elastomeric bearing. In: Construction and Building Materials, v. 232 (January 2020).
- (2019): Optimization of damped outrigger systems subject to stochastic excitation. In: Engineering Structures, v. 191 (July 2019).
- (2016): rate-dependent constitutive model of high damping rubber bearings: modeling and experimental verification. In: Earthquake Engineering and Structural Dynamics, v. 45, n. 11 (September 2016).
- (2018): novel energy dissipation outrigger system with rotational inertia damper. In: Advances in Structural Engineering, v. 21, n. 12 (March 2018).
- (2005): Integrated Device Placement and Control Design in Civil Structures Using Genetic Algorithms. In: Journal of Structural Engineering (ASCE), v. 131, n. 10 (October 2005).
Structurae cooperates with
