0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Fung, T. C. / Tan, K. H. / Nguyen, M. P. (2016): Structural Behavior of CHS T-Joints Subjected to Static In-Plane Bending in Fire Conditions. In: Journal of Structural Engineering (ASCE), v. 142, n. 3 (March 2016).

    https://doi.org/10.1061/(asce)st.1943-541x.0001382

  2. Zhang, Y. / Nguyen, M. P. / Fung, T. C. / Tan, K. H. (2023): Numerical and experimental study on structural behavior of restrained CHS T-joints in transient fire tests. In: Structures, v. 48 (February 2023).

    https://doi.org/10.1016/j.istruc.2022.12.075

  3. Zhang, J. / Fwa, T. F. / Tan, K. H. / Shi, X. P. (2003): Model for Nonlinear Thermal Effect on Pavement Warping Stresses. In: Journal of Transportation Engineering, v. 129, n. 6 (November 2003).

    https://doi.org/10.1061/(asce)0733-947x(2003)129:6(695)

  4. Li, Z. J. / Tan, K. H. / Balendra, T. (2008): Seismic retrofit of GLD shear wall structures in Singapore. In: The IES Journal Part A: Civil & Structural Engineering, v. 1, n. 3 (August 2008).

    https://doi.org/10.1080/19373260802088459

  5. Tan, K. H. / Naaman, A. E. (1993): Strut-and-Tie Model for Externally Prestressed Concrete Beams. In: ACI Structural Journal, v. 90, n. 6 (November 1993).

    https://doi.org/10.14359/4492

  6. Zeng, J. L. / Tan, K. H. / Huang, Z. F. (2003): Primary creep buckling of steel columns in fire. In: Journal of Constructional Steel Research, v. 59, n. 8 (August 2003).

    https://doi.org/10.1016/s0143-974x(03)00027-0

  7. Tan, K. H. / Yuan, W. F. (2009): Inelastic buckling of pin-ended steel columns under longitudinal non-uniform temperature distribution. In: Journal of Constructional Steel Research, v. 65, n. 1 (January 2009).

    https://doi.org/10.1016/j.jcsr.2008.07.010

  8. Tan, K. H. / Mansur, M. A. (1990): Shear Transfer in Reinforced Fiber Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 2, n. 4 (November 1990).

    https://doi.org/10.1061/(asce)0899-1561(1990)2:4(202)

  9. Tan, K. H. / Cheng, G. H. / Cheong, H. K. (2005): Size effect in shear strength of large beams—behaviour and finite element modelling. In: Magazine of Concrete Research, v. 57, n. 8 (October 2005).

    https://doi.org/10.1680/macr.2005.57.8.497

  10. Hu, O. E. / Tan, K. H. (2007): Large reinforced-concrete deep beams with web openings: test and strut-and-tie results. In: Magazine of Concrete Research, v. 59, n. 6 (August 2007).

    https://doi.org/10.1680/macr.2007.59.6.423

  11. Tan, K. H. / Tang, C. Y. / Tong, K. (2004): Shear strength predictions of pierced deep beams with inclined web reinforcement. In: Magazine of Concrete Research, v. 56, n. 8 (October 2004).

    https://doi.org/10.1680/macr.2004.56.8.443

  12. Bao, J. Q. / Long, X. / Tan, K. H. / Lee, C. K. (2013): A new generalized Drucker–Prager flow rule for concrete under compression. In: Engineering Structures, v. 56 (November 2013).

    https://doi.org/10.1016/j.engstruct.2013.08.025

  13. Fung, T. C. / Tan, K. H. (1998): Shear Stiffness for Z-Core Sandwich Panels. In: Journal of Structural Engineering (ASCE), v. 124, n. 7 (July 1998).

    https://doi.org/10.1061/(asce)0733-9445(1998)124:7(809)

  14. Mansur, M. A. / Tan, K. H. / Lee, Y. F. / Lee, S. L. (1991): Piecewise Linear Behavior of RC Beams with Openings. In: Journal of Structural Engineering (ASCE), v. 117, n. 6 (June 1991).

    https://doi.org/10.1061/(asce)0733-9445(1991)117:6(1607)

  15. Mansur, M. A. / Lee, Y. F. / Tan, K. H. / Lee, S. L. (1991): Tests on RC Continuous Beams with Openings. In: Journal of Structural Engineering (ASCE), v. 117, n. 6 (June 1991).

    https://doi.org/10.1061/(asce)0733-9445(1991)117:6(1593)

  16. Leong, C. L. / Tan, K. H. (2003): Proposed revision on CIRIA design equation for normal and high strength concrete deep beams. In: Magazine of Concrete Research, v. 55, n. 3 (June 2003).

    https://doi.org/10.1680/macr.2003.55.3.267

  17. Balendra, T. / Suyanthi, S. / Tan, K. H. / Ahmed, A. (2013): Seismic capacity of typical high-rise buildings in Singapore. In: The Structural Design of Tall and Special Buildings, v. 22, n. 18 (25 December 2013).

    https://doi.org/10.1002/tal.1014

  18. Weng, J. / Tan, K. H. / Lee, C. K. (2017): Modeling progressive collapse of 2D reinforced concrete frames subject to column removal scenario. In: Engineering Structures, v. 141 (June 2017).

    https://doi.org/10.1016/j.engstruct.2017.03.018

  19. Long, X. / Bao, J. Q. / Tan, K. H. / Lee, C. K. (2014): Numerical simulation of reinforced concrete beam/column failure considering normal-shear stress interaction. In: Engineering Structures, v. 74 (September 2014).

    https://doi.org/10.1016/j.engstruct.2014.05.011

  20. Bhowmik, T. / Tan, K. H. / Balendra, T. (2017): Lateral load-displacement response of low strength CFRP-confined capsule-shaped columns. In: Engineering Structures, v. 150 (November 2017).

    https://doi.org/10.1016/j.engstruct.2017.07.037

  21. Toh, W. S. / Tan, K. H. / Fung, T. C. (2001): Strength and Stability of Steel Frames in Fire: Rankine Approach. In: Journal of Structural Engineering (ASCE), v. 127, n. 4 (April 2001).

    https://doi.org/10.1061/(asce)0733-9445(2001)127:4(461)

  22. Fung, T. C. / Tan, K. H. / Lok, T. S. (1996): Shear Stiffness D Qy for C-Core Sandwich Panels. In: Journal of Structural Engineering (ASCE), v. 122, n. 8 (August 1996).

    https://doi.org/10.1061/(asce)0733-9445(1996)122:8(958)

  23. Tan, K. H. / Fung, T. C. / Nguyen, M. P. (2013): Structural Behavior of CHS T-Joints Subjected to Brace Axial Compression in Fire Conditions. In: Journal of Structural Engineering (ASCE), v. 139, n. 1 (January 2013).

    https://doi.org/10.1061/(asce)st.1943-541x.0000604

  24. Vimonsatit, V. / Tan, K. H. / Ting, S. K. (2003): Plastic Limit Temperatures of Flexibly Connected Steel Frames: A Linear Programming Problem. In: Journal of Structural Engineering (ASCE), v. 129, n. 1 (January 2003).

    https://doi.org/10.1061/(asce)0733-9445(2003)129:1(79)

  25. Vimonsatit, V. / Tan, K. H. / Ting, S. K. (2003): Nonlinear Elastoplastic Analysis of Semirigid Steel Frames at Elevated Temperature: MP Approach. In: Journal of Structural Engineering (ASCE), v. 129, n. 5 (May 2003).

    https://doi.org/10.1061/(asce)0733-9445(2003)129:5(661)

  26. Tan, K. H. / Tang, C. Y. (2004): Interaction Model for Unprotected Concrete Filled Steel Columns Under Standard Fire Conditions. In: Journal of Structural Engineering (ASCE), v. 130, n. 9 (September 2004).

    https://doi.org/10.1061/(asce)0733-9445(2004)130:9(1405)

  27. Tan, K. H. / Cheng, G. H. (2006): Size Effect on Shear Strength of Deep Beams: Investigating with Strut-and-Tie Model. In: Journal of Structural Engineering (ASCE), v. 132, n. 5 (May 2006).

    https://doi.org/10.1061/(asce)0733-9445(2006)132:5(673)

  28. Vimonsatit, V. / Tan, K. H. / Qian, Z. H. (2007): Testing of Plate Girder Web Panel Loaded in Shear at Elevated Temperature. In: Journal of Structural Engineering (ASCE), v. 133, n. 6 (June 2007).

    https://doi.org/10.1061/(asce)0733-9445(2007)133:6(815)

  29. Lim, Namyo Salim / Tan, K. H. / Lee, C. K. (2018): A simplified model for alternate load path assessment in RC structures. In: Engineering Structures, v. 171 (September 2018).

    https://doi.org/10.1016/j.engstruct.2018.05.074

  30. Tang, C. Y. / Tan, K. H. (2004): Interactive Mechanical Model for Shear Strength of Deep Beams. In: Journal of Structural Engineering (ASCE), v. 130, n. 10 (October 2004).

    https://doi.org/10.1061/(asce)0733-9445(2004)130:10(1534)

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine