Svend Svendsen 
- (2015): Modelling and multi-scenario analysis for electric heat tracing system combined with low temperature district heating for domestic hot water supply. In: Building Simulation, v. 9, n. 2 (December 2015).
- (2016): Method for achieving hydraulic balance in typical Chinese building heating systems by managing differential pressure and flow. In: Building Simulation, v. 10, n. 1 (September 2016).
- (2012): Investigation of interior post-insulated masonry walls with wooden beam ends. In: Journal of Building Physics, v. 36, n. 3 (October 2012).
- (2016): Alternative solutions for inhibiting Legionella in domestic hot water systems based on low-temperature district heating. In: Building Services Engineering Research and Technology, v. 37, n. 4 (June 2016).
- (2007): Comparison between ASHRAE and ISO thermal transmittance calculation methods. In: Energy and Buildings, v. 39, n. 3 (March 2007).
- (2020): Improving the district heating operation by innovative layout and control strategy of the hot water storage tank. In: Energy and Buildings, v. 224 (October 2020).
- (2010): Method and simulation program informed decisions in the early stages of building design. In: Energy and Buildings, v. 42, n. 7 (July 2010).
- (2010): Development of a slim window frame made of glass fibre reinforced polyester. In: Energy and Buildings, v. 42, n. 10 (October 2010).
- (2011): Analytical and experimental analysis of a low-pressure heat exchanger suitable for passive ventilation. In: Energy and Buildings, v. 43, n. 2-3 (February 2011).
- (2011): Experimental analysis of energy performance f a ventilated window for heat recovery under controlled conditions. In: Energy and Buildings, v. 43, n. 11 (November 2011).
- (2012): An hourly based performance comparison of an integrated micro-structural perforated shading screen with standard shading systems. In: Energy and Buildings, v. 50 (July 2012).
- (2013): Experimental study of perforated suspended ceilings as diffuse ventilation air inlets. In: Energy and Buildings, v. 56 (January 2013).
- (2013): Performance of a daylight-redirecting glass-shading system. In: Energy and Buildings, v. 64 (September 2013).
- (2015): Effects of boosting the supply temperature on pipe dimensions of low-energy district heating networks: A case study in Gladsaxe, Denmark. In: Energy and Buildings, v. 88 (February 2015).
- (2015): Impact of façade window design on energy, daylighting and thermal comfort in nearly zero-energy houses. In: Energy and Buildings, v. 102 (September 2015).
- (2015): Development of a plastic rotary heat exchanger for room-based ventilation in existing apartments. In: Energy and Buildings, v. 107 (November 2015).
- (2015): Dynamic behavior of radiant cooling system based on capillary tubes in walls made of high performance concrete. In: Energy and Buildings, v. 108 (December 2015).
- (2016): Roadmap for improving roof and façade windows in nearly zero-energy houses in Europe. In: Energy and Buildings, v. 116 (March 2016).
- (2016): The effect of a rotary heat exchanger in room-based ventilation on indoor humidity in existing apartments in temperate climates. In: Energy and Buildings, v. 116 (March 2016).
- (2016): Theoretical overview of heating power and necessary heating supply temperatures in typical Danish single-family houses from the 1900s. In: Energy and Buildings, v. 126 (August 2016).
- (2016): Case study of low-temperature heating in an existing single-family house—A test of methods for simulation of heating system temperatures. In: Energy and Buildings, v. 126 (August 2016).
- (2017): The effect of dynamic solar shading on energy, daylighting and thermal comfort in a nearly zero-energy loft room in Rome and Copenhagen. In: Energy and Buildings, v. 135 (January 2017).
- (2017): Full scale measurements and CFD investigations of a wall radiant cooling system integrated in thin concrete walls. In: Energy and Buildings, v. 139 (March 2017).
- (2017): The cost efficiency of improved roof windows in two well-lit nearly zero-energy houses in Copenhagen. In: Energy and Buildings, v. 140 (April 2017).
- (2017): Evaluation of the renovation of a Danish single-family house based on measurements. In: Energy and Buildings, v. 150 (September 2017).
- (2018): Improving thermal performance of an existing UK district heat network: A case for temperature optimization. In: Energy and Buildings, v. 158 (January 2018).
- (2018): Initiatives for the energy renovation of single-family houses in Denmark evaluated on the basis of barriers and motivators. In: Energy and Buildings, v. 167 (May 2018).
- (2019): Test and evaluation of a method to identify heating system malfunctions by using information from electronic heat cost allocators. In: Energy and Buildings, v. 184 (February 2019).
- (2018): Are typical radiators over-dimensioned? An analysis of radiator dimensions in 1645 Danish houses. In: Energy and Buildings, v. 178 (November 2018).
- (2005): Modelling floor heating systems using a validated two-dimensional ground-coupled numerical model. In: Building and Environment, v. 40, n. 2 (February 2005).
Structurae cooperates with
