Wei Sun 
- (2024): Immobilization of phosphorus and fluorine from whole phosphogypsum-based cemented backfill material with self-cementing properties. In: Construction and Building Materials, v. 438 (August 2024).
- (2023): The Impact of New Composite Curing Agents on the Curing Properties of Glacial Debris in the Pulang Copper Deposit. In: Buildings, v. 13, n. 9 (23 August 2023).
- (2004): The influence of mineral admixtures on resistance to corrosion of steel bars in green high-performance concrete. In: Cement and Concrete Research, v. 34, n. 10 (October 2004).
- (2022): Identification of damage mechanisms of polymer-concrete in direct shearing tests by acoustic emission. In: Construction and Building Materials, v. 351 (October 2022).
- (2023): Full-scale experiment for segmental linings of deep-buried shield tunnels bearing high inner water pressure: Comparison of mechanical behaviors of continuous- and stagger-jointed structures. In: Underground Space, v. 8 (February 2023).
- (2022): Investigation on fracture characteristics and failure pattern of inclined layered cemented tailings backfill. In: Construction and Building Materials, v. 343 (August 2022).
- (2021): Investigation on impact damage and shear after impact (SAI) behavior of grid stiffened panels. In: Composite Structures, v. 277 (December 2021).
- (2015): Least-Squares Support Vector Machine Based on Improved Imperialist Competitive Algorithm in a Short-Term Load Forecasting Model. In: Journal of Energy Engineering, v. 141, n. 4 (December 2015).
- (2020): Impact of urban morphology and landscape characteristics on spatiotemporal heterogeneity of land surface temperature. In: Sustainable Cities and Society, v. 63 (December 2020).
- (2020): Improving the design method of a solar heating system considering weather uncertainty and system reliability. In: Energy and Buildings, v. 208 (February 2020).
- (2018): Impacts of configurations on the strength of FRP anchors. In: Composite Structures, v. 194 (June 2018).
- (2020): Influence of Addition of Polycarboxylate-Based Superplasticizer on Properties of High Performance Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 3 (March 2020).
- (2018): Investigation of rheological and chemical properties asphalt binder rejuvenated with waste vegetable oil. In: Construction and Building Materials, v. 180 (August 2018).
- (2019): Impact of Temperature on the Strength Development of the Tailing-Waste Rock Backfill of a Gold Mine. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Mechanical and Creep Properties of Concrete containing Apricot Shell Lightweight Aggregate. In: KSCE Journal of Civil Engineering, v. 23, n. 7 (May 2019).
- (2019): Influence of Hybrid Fiber Reinforcement on Mechanical Properties and Autogenous Shrinkage of an Ecological UHPFRCC. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 5 (May 2019).
- (2015): Interactive Effect of Mechanical Fatigue Load and the Fatigue Effect of Freeze-Thaw on Combined Damage of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 8 (August 2015).
- (2019): Influence of sodium hydroxide on the performance and hydration of lime-based low carbon cementitious materials. In: Construction and Building Materials, v. 200 (March 2019).
- (2016): Mechanical and physicochemical properties of ferro-siliceous concrete subjected to elevated temperatures. In: Construction and Building Materials, v. 122 (September 2016).
- (2016): Influence of chloride concentration and pre-passivation on the pitting corrosion resistance of low-alloy reinforcing steel in simulated concrete pore solution. In: Construction and Building Materials, v. 111 (May 2016).
- (2017): Mechanical and thermal properties of graphene sulfonate nanosheet reinforced sacrificial concrete at elevated temperatures. In: Construction and Building Materials, v. 153 (October 2017).
- (2019): Improving the chloride binding capacity of cement paste by adding nano-Al2O3. In: Construction and Building Materials, v. 195 (January 2019).
- (2019): Investigation on porosity of partly carbonated paste specimens blended with fly ash through dual CT scans. In: Construction and Building Materials, v. 196 (January 2019).
- (2018): Iron sulfide-related internal sulfate attack: microstructure and mechanism. In: Magazine of Concrete Research, v. 70, n. 8 (April 2018).
- (2012): In situ dynamic XCT imaging of the microstructure evolution of cement mortar in accelerated carbonation reaction. In: Magazine of Concrete Research, v. 64, n. 11 (November 2012).
- (2016): Hierarchical modeling method and dynamic characteristics of cutter head driving system in tunneling boring machine. In: Tunnelling and Underground Space Technology, v. 52 (February 2016).
- (2013): High precision fiber SINS with spin technology. In: China Ocean Engineering, v. 27, n. 5 (October 2013).
- (2009): Health monitoring of reinforced concrete shear walls using smart aggregates. In: Smart Materials and Structures, v. 18, n. 4 (April 2009).
- (2018): Influence of Surface Condition on the Electrochemical Behavior of Alloy Steel in Saturated Ca(OH)2 Solution. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 9 (September 2018).
- (2018): Long-Term Electrochemical Behavior of Low-Alloy Steel in Simulated Concrete Pore Solution with Chlorides. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 4 (April 2018).
Structurae cooperates with
