Hongfang Sun
- (2023): Synthesis of a novel graphene oxide/belite cement composite and its effects on flexural strength and interfacial transition zone of ordinary portland cement mortars. In: Construction and Building Materials, v. 402 (October 2023).
- (2023): Study on the non-uniformity of rust layer and residual rebar caused by pitting corrosion in mortar. In: Construction and Building Materials, v. 406 (November 2023).
- (2022): Influence of initial defects on the degradation of steel reinforced mortar exposed to cyclic wetting and drying environment based on 3D scanning. In: Construction and Building Materials, v. 325 (March 2022).
- (2022): Combined Effects of Sulfate and Chloride Attack on Steel Reinforced Mortar under Drying–Immersion Cycles. In: Buildings, v. 12, n. 8 (31 July 2022).
- (2021): Effects of natural seawater mixing on the properties of alkali-activated slag binders. In: Construction and Building Materials, v. 294 (August 2021).
- (2021): Experimental comparisons between one-part and normal (two-part) alkali-activated slag binders. In: Construction and Building Materials, v. 309 (November 2021).
- (2021): Monitoring of steel corrosion and cracking in cement paste exposed to combined sulfate–chloride attack with X-ray microtomography. In: Construction and Building Materials, v. 302 (October 2021).
- (2021): Degradation mechanism of cement mortar exposed to combined sulfate–chloride attack under cyclic wetting–drying condition. In: Materials and Structures, v. 54, n. 4 (2 July 2021).
- (2012): Irradiation Damage of Nano-C2S Particles Studied by In-Situ Transmission Electron Microscopy. In: Journal of Civil Engineering and Architecture, v. 6, n. 4 (April 2012).
- (2018): Evaluating the effect of external and internal factors on carbonation of existing concrete building structures. In: Construction and Building Materials, v. 167 (April 2018).
- (2019): Influence of Acceleration Approaches on the Corrosion Behavior of Embedded Steel in Mortar. In: Advances in Civil Engineering Materials, v. 8, n. 3 (March 2019).
- (2019): Effects of initial defects within mortar cover on corrosion of steel and cracking of cover using X-ray computed tomography. In: Construction and Building Materials, v. 223 (October 2019).
- (2019): Effects of external confinement on steel reinforcement corrosion products monitored by X-ray microcomputer tomography. In: Construction and Building Materials, v. 222 (October 2019).
- (2014): Study on the microstructure of cement-based piezoelectric ceramic composites. In: Construction and Building Materials, v. 72 (December 2014).
- (2015): Electrochemical impedance interpretation of the carbonation behavior for fly ash–slag–cement materials. In: Construction and Building Materials, v. 93 (September 2015).
- (2016): Corrosion behavior of carbon fiber reinforced polymer anode in simulated impressed current cathodic protection system with 3% NaCl solution. In: Construction and Building Materials, v. 112 (June 2016).
- (2017): Investigating drying behavior of cement mortar through electrochemical impedance spectroscopy analysis. In: Construction and Building Materials, v. 135 (March 2017).
- (2017): Three-dimensional characterization of steel corrosion embedded in cement paste. In: Construction and Building Materials, v. 143 (July 2017).
- (2017): 3D particle size distribution of inter-ground Portland limestone/slag cement from 2D observations: Characterization and distribution evaluation. In: Construction and Building Materials, v. 147 (August 2017).
- (2016): Degradation of carbon fiber reinforced polymer from cathodic protection process on exposure to NaOH and simulated pore water solutions. In: Materials and Structures, v. 49, n. 12 (December 2016).
Structurae cooperates with
