Nino Spinella 
- (2024): Experimental Application of the Italian Bridge Guidelines to a Stock of Prestressed Concrete Bridges. In: Infrastructures, v. 9, n. 11 (24 October 2024).
- (2024): Protocol of investigations for the preliminary assessment of the structural safety of highway overpasses. In: Structures, v. 70 (December 2024).
- (2023): Experimental application of the Italian guidelines for the risk classification and management and for the safety evaluation of existing bridges. In: Structures, v. 58 (December 2023).
- (2023): Prediction of the monotonic load–displacement curve of slender RC beams with corroded transverse and longitudinal reinforcements. In: Structural Concrete, v. 24, n. 5 (October 2023).
- (2023): Mechanical model for the shear-punching strength of steel fiber reinforced concrete slabs under concentric loading. In: Structures, v. 52 (June 2023).
- (2020): The Strengthening of Masonry Walls in Seismic-Prone Areas with the CAM System: Experimental and Numerical Results. In: Infrastructures, v. 5, n. 12 (December 2020).
- (2022): Calibration of the Length of the Plastic Hinge for Numerical Models of Reinforced Concrete Members. In: Buildings, v. 12, n. 10 (20 September 2022).
- (2023): Load‐bearing capacity of Gerber saddles in existing bridge girders by different levels of numerical analysis. In: Structural Concrete, v. 24, n. 1 (February 2023).
- (2022): Resistencia a flexion de vigas postensadas de hormigón con corrosión. Ensayos a gran escala y simulación numérica.. In: Hormigón y acero, v. 73, n. 297 ( 2022).
- : Modelo mecánico para la resistencia a cortante de vigas de hormigón armado reforzado con fibras, sin armadura de cortante. In: Hormigón y acero.
- (2020): Bond behavior and ultimate capacity of notched concrete beams with externally-bonded FRP and PBO-FRCM systems under different environmental conditions. In: Construction and Building Materials, v. 265 (December 2020).
- (2019): Modeling of shear behavior of reinforced concrete beams strengthened with FRP. In: Composite Structures, v. 215 (May 2019).
- (2019): Effects of near-fault earthquakes on existing bridge performances. In: Journal of Civil Structural Health Monitoring, v. 10, n. 1 (December 2019).
- (2019): Experimental tests on corroded prestressed concrete beams subjected to transverse load. In: Structural Concrete, v. 20, n. 6 (December 2019).
- (2014): Design procedure for prestressed concrete beams. In: Computers and Concrete, v. 13, n. 2 (February 2014).
- (2013): Shear strength of full-scale steel fibre-reinforced concrete beams without stirrups. In: Computers and Concrete, v. 11, n. 5 (May 2013).
- (2012): Generalization of shear truss model to the case of SFRC beams with stirrups. In: Computers and Concrete, v. 9, n. 3 (March 2012).
- (2017): Stress Field Model for Strengthening of Shear-Flexure Critical RC Beams. In: Journal of Composites for Construction, v. 21, n. 5 (October 2017).
- (2007): Ductility of Reinforced Concrete Members Externally Wrapped with Fiber-Reinforced Polymer Sheets. In: Journal of Composites for Construction, v. 11, n. 3 (June 2007).
- (2014): Concrete columns confined with fibre reinforced cementitious mortars: Experimentation and modelling. In: Construction and Building Materials, v. 52 (February 2014).
- (2014): Experimental in situ behaviour of unreinforced masonry elements retrofitted by pre-tensioned stainless steel ribbons. In: Construction and Building Materials, v. 73 (December 2014).
- (2014): Increasing the Capacity of Existing Bridges by Using Unbonded Prestressing Technology: A Case Study. In: Advances in Civil Engineering, v. 2014 ( 2014).
- (2013): Stress-Strain Law for Confined Concrete with Hardening or Softening Behavior. In: Advances in Civil Engineering, v. 2013 ( 2013).
- (2014): Shear strength degradation due to flexural ductility demand in circular RC columns. In: Bulletin of Earthquake Engineering, v. 13, n. 6 (September 2014).
- (2014): Shear capacity in concrete beams reinforced by stirrups with two different inclinations. In: Engineering Structures, v. 81 (December 2014).
- (2010): Simple Plastic Model for Shear Critical SFRC Beams. In: Journal of Structural Engineering (ASCE), v. 136, n. 4 (April 2010).
- (2018): A Model for the Analysis of Ultimate Capacity of RC and PC Corroded Beams. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2016): Increasing the flexural capacity of RC beams using steel angles and pre-tensioned stainless steel ribbons. In: Structural Concrete, v. 17, n. 5 (October 2016).
- (2017): Increasing the shear capacity of reinforced concrete beams using pretensioned stainless steel ribbons. In: Structural Concrete, v. 18, n. 3 (June 2017).
- (2011): Rotating compression field model for reinforced concrete beams under prevalent shear actions. In: Structural Concrete, v. 12, n. 3 (September 2011).
Structurae cooperates with
