Enrico Spacone 
- (2023): Effects of Multi-Directional Seismic Input on Non-Linear Static Analysis of Existing Reinforced Concrete Structures. In: Buildings, v. 13, n. 7 (28 June 2023).
- (2023): Effects of the extended N2 method on non-linear static procedures of reinforced concrete frame structures. In: Soil Dynamics and Earthquake Engineering, v. 173 (October 2023).
- (2023): A fiber beam element based on plastic and damage models for prestressed concrete structures. In: Engineering Structures, v. 292 (October 2023).
- (2023): Influence of the modelling approach on the seismic assessment of RC structures by nonlinear static analyses. In: Soil Dynamics and Earthquake Engineering, v. 172 (September 2023).
- (2018): Energy retrofit solutions for heritage buildings located in hot-humid climates. In: Procedia Structural Integrity, v. 11 ( 2018).
- (2019): Define Urban Limit Conditions by Applying Performance Goals. Presented at: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (1993): Analytical models for strength and stiffness evaluation of concrete structures. Presented at: IABSE Colloquium: Remaining Structural Capacity, Copenhagen, Denmark, 1993.
- (2021): A 2D beam‐column joint macro‐element for the nonlinear analysis of RC frames. In: Earthquake Engineering and Structural Dynamics, v. 50, n. 3 (March 2021).
- (2020): Assessing community resilience, housing recovery and impact of mitigation strategies at the urban scale: a case study after the 2012 Northern Italy Earthquake. In: Bulletin of Earthquake Engineering, v. 18, n. 13 (July 2020).
- (2020): Comparison Between Phenomenological and Fiber-Section Non-linear Models. In: Frontiers in Built Environment, v. 6 (January 2020).
- (2019): Effects of the vertical seismic component on seismic performance of an unreinforced masonry structures. In: Bulletin of Earthquake Engineering, v. 18, n. 4 (November 2019).
- (2015): Influence of ground motion selection methods on seismic directionality effects. In: Earthquakes and Structures, v. 8, n. 1 (January 2015).
- (2015): Assessment of seismic strengthening solutions for existing low-rise RC buildings in Nepal. In: Earthquakes and Structures, v. 8, n. 3 (March 2015).
- (2018): Effects of bond-slip and masonry infills interaction on seismic performance of older R/C frame structures. In: Soil Dynamics and Earthquake Engineering, v. 109 (June 2018).
- (2019): Cyclic Analyses of Reinforced Concrete Masonry Panels Using a Force-Based Frame Element. In: Journal of Structural Engineering (ASCE), v. 145, n. 7 (July 2019).
- (2004): Analysis of Test Specimens for Cohesive Near-Bond Failure of Fiber-Reinforced Polymer-Plated Concrete. In: Journal of Composites for Construction, v. 8, n. 6 (December 2004).
- (2004): Failure Mode Analyses of Reinforced Concrete Beams Strengthened in Flexure with Externally Bonded Fiber-Reinforced Polymers. In: Journal of Composites for Construction, v. 8, n. 2 (April 2004).
- (2006): Frame element with lateral deformable supports: Formulations and numerical validation. In: Computers & Structures, v. 84, n. 13-14 (May 2006).
- (2000): Failure analysis of R/C columns using a triaxial concrete model. In: Computers & Structures, v. 77, n. 5 (July 2000).
- (2015): Advanced frame element for seismic analysis of masonry structures: model formulation and validation. In: Earthquake Engineering and Structural Dynamics, v. 44, n. 14 (November 2015).
- (2014): Design Procedures of Reinforced Concrete Framed Buildings in Nepal and its Impact on Seismic Safety. In: Advances in Structural Engineering, v. 17, n. 10 (November 2014).
- (2003): Effects of reinforcement slippage on the non-linear response under cyclic loadings of RC frame structures. In: Earthquake Engineering and Structural Dynamics, v. 32, n. 15 (December 2003).
- (2001): A 3D hypoplastic model for cyclic analysis of concrete structures. In: Engineering Structures, v. 23, n. 4 (April 2001).
- (2001): Finite element formulations of one-dimensional elements with bond-slip. In: Engineering Structures, v. 23, n. 7 (July 2001).
- (2015): Earthquake loss estimation for the Kathmandu Valley. In: Bulletin of Earthquake Engineering, v. 14, n. 1 (September 2015).
- (2017): Analysis of the performance in the linear field of Equivalent-Frame Models for regular and irregular masonry walls. In: Engineering Structures, v. 145 (August 2017).
- (2001): Analysis of Steel-Concrete Composite Frames with Bond-Slip. In: Journal of Structural Engineering (ASCE), v. 127, n. 11 (November 2001).
- (1997): Finite Element for Anchored Bars under Cyclic Load Reversals. In: Journal of Structural Engineering (ASCE), v. 123, n. 5 (May 1997).
- (2019): Ductility reduction factor formulations for seismic design of RC wall and frame structures. In: Engineering Structures, v. 178 (January 2019).
- (2005): Analytical Model of Concrete-Filled Fiber-Reinforced Polymer Tubes based on Multiaxial Constitutive Laws. In: Journal of Structural Engineering (ASCE), v. 131, n. 9 (September 2005).
Structurae cooperates with
