Dharamveer Singh 
- (2023): Effect of Different Long-Term Aging Conditions on Cracking Resistance of Polymer-Modified Asphalt Binder and Mixes. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (December 2023).
- (2023): Comparison of Rutting Resistance of Plant Produced Asphalt Mixes Using Hamburg Wheel Tracker and Surrogate Simple Performance Tests: IDEAL-RT and HT-IDT. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (December 2023).
- (2023): Effects of air voids on comprehensive laboratory performance of cold mix containing recycled asphalt pavement. In: Construction and Building Materials, v. 368 (March 2023).
- (2022): Comparing Different HWTT Analysis Methods for Asphalt Mixes Containing RAP and Correlating with MIST-TSR. In: Advances in Civil Engineering Materials, v. 11, n. 1 (11 January 2022).
- (2021): Effect of MIST Conditioning on Moisture-Induced Damage of RAP Mixes Using Elastic Moduli and Stress–Strain Behavior. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 12 (December 2021).
- (2015): Effect of Shape Parameters and Gradation on Laboratory-Measured Permeability of Aggregate Bases. In: International Journal of Geomechanics, v. 15, n. 4 (August 2015).
- (2021): Effectiveness of Hydrated Lime Filler on Fracture and Cracking Properties of Polymer and Crumb Rubber–Modified Asphalt Mastics. In: Advances in Civil Engineering Materials, v. 10, n. 1 (25 January 2021).
- (2021): Evaluating Factors Affecting Aggregate-Bitumen Interfacial Strength Using Binder Bond-Strength Test. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 5 (May 2021).
- (2020): A comprehensive study on source dependency of conventional, chemical and rheological properties of asphalt binder. In: Construction and Building Materials, v. 258 (October 2020).
- (2020): Effect of Recycled Asphalt Pavement Binder on Rheology of Crumb Rubber–Modified Binder—An Experimental, Analytical, and Analogical Study. In: Advances in Civil Engineering Materials, v. 9, n. 1 (28 January 2020).
- (2020): Effects of Amine and Silane Antistripping Agents on Rheological Behavior of Crumb Rubber Modified Binder at High and Low Temperature. In: Advances in Civil Engineering Materials, v. 9, n. 1 (28 January 2020).
- (2020): Evaluating the Effect of Carbon Nanotube on Low Temperature Property of Asphalt Binder through Dissipated Energy–Based Approach. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 3 (March 2020).
- (2018): Different methods of selecting probe liquids to measure the surface free energy of asphalt binders. In: Construction and Building Materials, v. 175 (June 2018).
- (2018): An alternative analysis of indirect tensile test results for evaluating fatigue characteristics of asphalt mixes. In: Construction and Building Materials, v. 166 (March 2018).
- (2018): Development of empirical model for predicting G∗/Sinδ and viscosity value for nanoclay and Carbon Nano Tube modified asphalt binder. In: Construction and Building Materials, v. 165 (March 2018).
- (2018): Evaluating suitability of energy efficient and anti-stripping additives for polymer and Polyphosphoric acid modified asphalt binder using surface free energy approach. In: Construction and Building Materials, v. 158 (January 2018).
- (2019): Effect of Short-Term Aging on Wax-Modified Crumb Rubber Binder Based on Rutting Performance and Chemical Characterization. In: Advances in Civil Engineering Materials, v. 8, n. 1 (July 2019).
- (2019): Effects of Aggregate Shape on Performance of Gravel-Aggregate Hot-Mix Asphalt Using Digital Image-Based Approach. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 11 (November 2019).
- (2019): Effects of bio-oil on performance characteristics of base and recycled asphalt pavement binders. In: Construction and Building Materials, v. 227 (December 2019).
- (2019): Effect of Carbon Nano Tube on performance of asphalt binder under creep-recovery and sustained loading conditions. In: Construction and Building Materials, v. 215 (August 2019).
- (2019): Effect of Warm-Mix Additives and Lime on Intermediate-Temperature Fracture Property of RET- and PPA-Modified Asphalt Binder. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 7 (July 2019).
- (2013): Artificial Neural Network Modeling for Dynamic Modulus of Hot Mix Asphalt Using Aggregate Shape Properties. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 1 (January 2013).
- (2016): Comparison of Wilhelmy plate and Sessile drop methods to rank moisture damage susceptibility of asphalt – Aggregates combinations. In: Construction and Building Materials, v. 113 (June 2016).
- (2016): Comparison of laboratory performance of asphalt mixes containing different proportions of RAS and RAP. In: Construction and Building Materials, v. 124 (October 2016).
- (2017): Comparison of moisture and fracture damage resistance of hot and warm asphalt mixes containing reclaimed pavement materials. In: Construction and Building Materials, v. 157 (December 2017).
- (2017): Evaluating effectiveness of WMA additives for SBS modified binder based on viscosity, Superpave PG, rutting and fatigue performance. In: Construction and Building Materials, v. 146 (August 2017).
- (2018): Effects of Wax-Based, Chemical-Based, and Water-Based Warm-Mix Additives on Mechanical Performance of Asphalt Binders. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 10 (October 2018).
- (2018): Effects of Basalt and Hydrated Lime Fillers on Rheological and Fracture Cracking Behavior of Polymer Modified Asphalt Mastic. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 3 (March 2018).
- (2017): Evaluating Performance of PPA-and-Elvaloy-Modified Binder Containing WMA Additives and Lime Using MSCR and LAS Tests. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 8 (August 2017).
- (2017): Comparison of Shape Parameters and Laboratory Performance of Coarse Aggregates Produced from Different Types of Crushing Operations. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 7 (July 2017).
Structurae cooperates with
