Zhonghe Shui
- (2024): Development and properties of cost-effective self-sensing Ultra-High Performance Fiber-Reinforced Concrete (UHPFRC) incorporating steel slags. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Effect of MgO and superfine slag modification on the carbonation resistance of phosphogypsum-based cementitious materials: Based on hydration enhancement and phase evolution regulation. In: Construction and Building Materials, v. 415 (February 2024).
- (2023): Effect of eggshell powder addition on the properties of cement pastes with early CO2 curing and further water curing. In: Construction and Building Materials, v. 404 (November 2023).
- (2022): Development of a rapid hardening ultra-high performance concrete (R-UHPC): From macro properties to micro structure. In: Construction and Building Materials, v. 329 (April 2022).
- (2022): Advanced utilization of molybdenum tailings in producing Ultra High-Performance Composites based on a green activation strategy. In: Construction and Building Materials, v. 330 (May 2022).
- (2022): Chloride binding behaviors of alumina-rich pozzolan-lime mixtures. In: Materials and Structures, v. 55, n. 2 (4 February 2022).
- (2021): Design of sustainable ultra-high performance concrete: A review. In: Construction and Building Materials, v. 307 (November 2021).
- (2021): Evaluation and regulation of Ultra-High Performance Concrete (UHPC) crack resistance based on physicochemical multi-factor coupling approach. In: Construction and Building Materials, v. 301 (September 2021).
- (2020): Alumina-rich pozzolan modification on Portland-limestone cement concrete: Hydration kinetics, formation of hydrates and long-term performance evolution. In: Construction and Building Materials, v. 258 (October 2020).
- (2018): Design and manufacture of a dual-functional exterior wall structure for 1.1–5 GHz electromagnetic radiation absorption. In: Composite Structures, v. 201 (October 2018).
- (2018): Evaluation and optimization of Ultra-High Performance Concrete (UHPC) subjected to harsh ocean environment: Towards an application of Layered Double Hydroxides (LDHs). In: Construction and Building Materials, v. 177 (July 2018).
- (2018): Durability and microstructure of coral sand concrete incorporating supplementary cementitious materials. In: Construction and Building Materials, v. 171 (May 2018).
- (2019): Comparing pozzolanic activity from thermal-activated water-washed and coal-series kaolin in Portland cement mortar. In: Construction and Building Materials, v. 227 (December 2019).
- (2019): Experimental and Modeling Explanations for Enhancing Mechanisms of Colloidal Nanoalumina in Calcite-Containing Cementitious Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 12 (December 2019).
- (2020): Degradation mechanisms of Portland cement mortar under seawater attack and drying-wetting cycles. In: Construction and Building Materials, v. 230 (January 2020).
- (2019): Effects of combined expansive agents and supplementary cementitious materials on the mechanical properties, shrinkage and chloride penetration of self-compacting concrete. In: Construction and Building Materials, v. 211 (June 2019).
- (2019): Effects of sulfate and magnesium ion on the chloride transportation behavior and binding capacity of Portland cement mortar. In: Construction and Building Materials, v. 204 (April 2019).
- (2019): Chloride binding behaviors of metakaolin-lime hydrated blends: Influence of gypsum and atmospheric carbonation. In: Construction and Building Materials, v. 201 (March 2019).
- (2009): Cementitious characteristics of hydrated cement paste subjected to various dehydration temperatures. In: Construction and Building Materials, v. 23, n. 1 (January 2009).
- (2012): Determination of water content in fresh concrete mix based on relative dielectric constant measurement. In: Construction and Building Materials, v. 34 (September 2012).
- (2013): Effect of water–binder ratio and fly ash on the homogeneity of concrete. In: Construction and Building Materials, v. 38 (January 2013).
- (2013): Effects of metakaolin, silica fume and slag on pore structure, interfacial transition zone and compressive strength of concrete. In: Construction and Building Materials, v. 44 (July 2013).
- (2014): Feasibility of self-healing in cementitious materials – By using capsules or a vascular system?. In: Construction and Building Materials, v. 63 (July 2014).
- (2015): Combined effect of metakaolin and sea water on performance and microstructures of concrete. In: Construction and Building Materials, v. 74 (January 2015).
- (2015): Chloride binding of synthetic Ca–Al–NO3 LDHs in hardened cement paste. In: Construction and Building Materials, v. 93 (September 2015).
- (2015): Chloride resistance of concrete with metakaolin addition and seawater mixing: A comparative study. In: Construction and Building Materials, v. 101 (December 2015).
- (2016): Effect of MgO content of synthetic slag on the formation of Mg-Al LDHs and sulfate resistance of slag-fly ash-clinker binder. In: Construction and Building Materials, v. 125 (October 2016).
- (2017): Effect of coral filler on the hydration and properties of calcium sulfoaluminate cement based materials. In: Construction and Building Materials, v. 150 (September 2017).
- (2018): Chloride ingress and binding of coral waste filler-coral waste sand marine mortar incorporating metakaolin. In: Construction and Building Materials, v. 190 (November 2018).
- (2018): Effects of seawater and supplementary cementitious materials on the durability and microstructure of lightweight aggregate concrete. In: Construction and Building Materials, v. 190 (November 2018).
Structurae cooperates with
