Jinyan Shi 
- (2024): Evaluation of thermal insulation capacity and mechanical performance of a novel low-carbon thermal insulating foam concrete. In: Energy and Buildings, v. 323 (November 2024).
- (2024): Clarifying the three stages of elasticity development during C3S hydration: Contributions of ion correlation forces and van der Waals interactions. In: Construction and Building Materials, v. 445 (September 2024).
- (2024): A novel thermal-tailored strategy to mitigate thermal cracking of cement-based materials by carbon fibers and liquid-metal-based microencapsulated phase change materials. In: Construction and Building Materials, v. 428 (May 2024).
- (2024): Ethylene Vinyl Acetate Copolymer Emulsion-Modified Alkali-Activated Slag Repair Material: Mechanical Strength and Durability Linked to Microstructural Properties. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 7 (July 2024).
- (2024): Application of lime mud as a sustainable alternative construction material: A comprehensive review of approaches. In: Journal of Building Engineering, v. 87 (June 2024).
- (2023): The effects of nanomaterials on the characteristics of aluminosilicate-based geopolymer composites: A critical review. In: Journal of Building Engineering, v. 73 (August 2023).
- (2023): Insights into mechanical property and damage evaluation of a novel waste-based coal gangue-filled backfill. In: Construction and Building Materials, v. 389 (July 2023).
- (2023): Effect of stone powder content on the mechanical properties and microstructure of tunnel slag aggregate-based concrete. In: Construction and Building Materials, v. 388 (July 2023).
- (2024): Confined water redistribution governs nanomechanical property changes of cement pastes curing at different air pressures. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Improving mechanical properties and sustainability of high-strength engineered cementitious composites (ECC) using diatomite. In: Materials and Structures, v. 57, n. 1 (26 December 2023).
- (2023): Effect of various parameters on carbonation treatment of recycled concrete aggregate using the design of experiment method. In: Construction and Building Materials, v. 382 (June 2023).
- (2023): Influences of the joint action of sulfate erosion and cementitious capillary crystalline waterproofing materials on the hydration products and properties of cement-based materials: A review. In: Journal of Building Engineering, v. 68 (June 2023).
- (2023): The effect of steel fiber aspect-ratio and content on the fresh, flexural, and mechanical performance of concrete made with recycled fine aggregate. In: Construction and Building Materials, v. 368 (March 2023).
- (2022): Development of a new magnesium oxychloride cement board by recycling of waste wood, rice husk ash and flue gas desulfurization gypsum. In: Journal of Building Engineering, v. 61 (December 2022).
- (2023): Mechanical and fractural characteristics of structural lightweight fiber reinforced concrete. In: Structural Concrete, v. 24, n. 2 (April 2023).
- (2022): Influencing mechanism of silica fume on early-age properties of magnesium phosphate cement-based coating for hydraulic structure. In: Journal of Building Engineering, v. 54 (August 2022).
- (2022): Physico-mechanical, thermal properties and durability of foamed geopolymer concrete containing cenospheres. In: Construction and Building Materials, v. 325 (March 2022).
- (2021): Effect of steam curing regimes on temperature and humidity gradient, permeability and microstructure of concrete. In: Construction and Building Materials, v. 281 (April 2021).
- (2022): Optimization of foam concrete characteristics using response surface methodology and artificial neural networks. In: Construction and Building Materials, v. 337 (June 2022).
- (2021): New perspectives on utilization of CO2 sequestration technologies in cement-based materials. In: Construction and Building Materials, v. 272 (February 2021).
- (2020): Experimental Studies and Microstructure Analysis for Rapid-Hardening Cement Emulsified Asphalt Mortar. In: Journal of Construction Engineering and Management, v. 146, n. 12 (December 2020).
- (2020): Evolution of mechanical properties and permeability of concrete during steam curing process. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): Preparation and characterization of lightweight aggregate foamed geopolymer concretes aerated using hydrogen peroxide. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Effect of steam curing on surface permeability of concrete: Multiple transmission media. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): Effect of curing regime on long-term mechanical strength and transport properties of steam-cured concrete. In: Construction and Building Materials, v. 255 (September 2020).
- (2020): Effects of steam curing regimes on the capillary water absorption of concrete: Prediction using multivariable regression models. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Effects of curing methods of concrete after steam curing on mechanical strength and permeability. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Heat damage of concrete surfaces under steam curing and improvement measures. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): Mechanical and permeability properties of polymer-modified concrete using hydrophobic agent. In: Journal of Building Engineering, v. 31 (September 2020).
- (2020): Experimental study of performance of repair mortar: Evaluation of in-situ tests and correlation analysis. In: Journal of Building Engineering, v. 31 (September 2020).
Structurae cooperates with
