Caijun Shi 
- (2024): Effects of silica fume/ultrafine fly ash on the rheology and hardening of alkali-activated slag-waste ceramic powder paste. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Effects of different activators on autogenous shrinkage of alkali-activated slag cement. In: Construction and Building Materials, v. 446 (October 2024).
- (2023): Effects of the combination of NH4H2PO4 and KH2PO4 on the interfacial bond between magnesium phosphate cement and steel fiber. In: Construction and Building Materials, v. 407 (December 2023).
- (2018): Effects of alkali dosage and silicate modulus on alkali-silica reaction in alkali-activated slag mortars. In: Cement and Concrete Research, v. 111 (September 2018).
- (2022): Effects of water to binder ratio on the chloride binding behaviour of artificial seawater cement paste blended with metakaolin and silica fume. In: Construction and Building Materials, v. 353 (October 2022).
- (2022): Effect of Solid Volume Fraction on the Magnetorheological Response of Nano-Fe3O4 Incorporated Cementitious Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 11 (November 2022).
- (2022): Effect of polycarboxylate superplasticizers on the growth of ettringite in deionized water and synthetic cement pore solution. In: Construction and Building Materials, v. 341 (July 2022).
- (2021): The effects of aging in seawater and SWSSC and strain rate on the tensile performance of GFRP/BFRP composites: A critical review. In: Construction and Building Materials, v. 282 (May 2021).
- (2021): Effects of SAP characteristics on internal curing of UHPC matrix. In: Construction and Building Materials, v. 280 (April 2021).
- (2021): Enhanced carbonation reactivity of wollastonite by rapid cooling process: Towards an ultra-low calcium CO2 sequestration binder. In: Construction and Building Materials, v. 299 (September 2021).
- (2020): Effects of Loading Rate and Temperature on Pullout Response of Basalt Textile–Reinforced Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 8 (August 2020).
- (2020): Effects of superabsorbent polymer on interfacial transition zone and mechanical properties of ultra-high performance concrete. In: Construction and Building Materials, v. 231 (January 2020).
- (2019): Effects of superabsorbent polymer on shrinkage properties of ultra-high strength concrete under drying condition. In: Construction and Building Materials, v. 215 (August 2019).
- (2019): Effects of pretreated fine lightweight aggregate on shrinkage and pore structure of ultra-high strength concrete. In: Construction and Building Materials, v. 204 (April 2019).
- (2019): Effects of rotational shearing on rheological behavior of fresh mortar with short glass fiber. In: Construction and Building Materials, v. 203 (April 2019).
- (2015): Effects of Deicing Salts on the Scaling Resistance of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 5 (May 2015).
- (2017): Effects of Chloride Ion Binding on Microstructure of Cement Pastes. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 1 (January 2017).
- (2012): Effect of pre-conditioning on CO2 curing of lightweight concrete blocks mixtures. In: Construction and Building Materials, v. 26 (January 2012).
- (2013): Effect of organic layered silicates on flame retardancy and aging properties of bitumen. In: Construction and Building Materials, v. 40 (March 2013).
- (2014): Effect of organic layered silicate on microstructures and aging properties of styrene–butadiene–styrene copolymer modified bitumen. In: Construction and Building Materials, v. 68 (October 2014).
- (2016): Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete. In: Construction and Building Materials, v. 103 (January 2016).
- (2016): Effects of triisopropanol amine, sodium chloride and limestone on the compressive strength and hydration of Portland cement. In: Construction and Building Materials, v. 125 (October 2016).
- (2017): Effects of SAP on the properties and pore structure of high performance cement-based materials. In: Construction and Building Materials, v. 131 (January 2017).
- (2017): Effect of nano-zinc oxide and organic expanded vermiculite on rheological properties of different bitumens before and after aging. In: Construction and Building Materials, v. 146 (August 2017).
- (2017): Effects of CO2 surface treatment on strength and permeability of one-day-aged cement mortar. In: Construction and Building Materials, v. 154 (November 2017).
- (2019): Effect of water absorption of SAP on the rheological properties of cement-based materials with ultra-low w/b ratio. In: Construction and Building Materials, v. 195 (January 2019).
- (2015): Effect of nano-zinc oxide on ultraviolet aging properties of bitumen with 60/80 penetration grade. In: Materials and Structures, v. 48, n. 10 (October 2015).
- (2018): Effects of carbonated hardened cement paste powder on hydration and microstructure of Portland cement. In: Construction and Building Materials, v. 186 (October 2018).
- (2018): Effect of SCM and nano-particles on static and dynamic mechanical properties of UHPC. In: Construction and Building Materials, v. 182 (September 2018).
- (2018): Effects of Strain Rate and Temperature on the Flexural Behavior of Basalt and Glass Textile–Reinforced Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 8 (August 2018).
Structurae cooperates with
