Peiliang Shen 
- (2024): Maximising the utilisation of WGP in seawater-mixed UHPC. In: Construction and Building Materials, v. 435 (July 2024).
- (2024): Microstructural Evolution of Calcium Sulfoaluminate Cement during the Wet-Carbonation Process. In: Buildings, v. 14, n. 2 (1 February 2024).
- (2024): Roles of ultra-fine waste glass powder in early hydration of Portland cement: Hydration kinetics, mechanical performance, and microstructure. In: Construction and Building Materials, v. 415 (February 2024).
- (2023): Influence of seawater concentration on alkali-silica reaction of seawater sea-sand concrete: Mimicking through NaCl solution and recycled glass aggregate. In: Construction and Building Materials, v. 394 (August 2023).
- (2021): Development and characteristics of ultra high-performance lightweight cementitious composites (UHP-LCCs). In: Cement and Concrete Research, v. 145 (July 2021).
- (2019): The effect of curing regimes on the mechanical properties, nano-mechanical properties and microstructure of ultra-high performance concrete. In: Cement and Concrete Research, v. 118 (April 2019).
- (2023): Development of novel mineral admixtures for sulphoaluminate cement clinker: The effects of wet carbonation activated red mud. In: Journal of Building Engineering, v. 67 (May 2023).
- (2023): Influence of acrylamide in-situ polymerization on the mechanical properties and microstructure of OPC-CSA-Cs-FA quaternary system. In: Journal of Building Engineering, v. 67 (May 2023).
- (2023): Influence of spatial dislocation of water on the properties of lightweight high-performance concrete. In: Construction and Building Materials, v. 367 (February 2023).
- (2022): Hydration-hardening properties of low-clinker composite cement incorporating carbonated waste sintering red mud and metakaolin. In: Construction and Building Materials, v. 354 (November 2022).
- (2023): Roles of recycled fine aggregate and carbonated recycled fine aggregate in alkali-activated slag and glass powder mortar. In: Construction and Building Materials, v. 364 (January 2023).
- (2022): Physicochemical investigation of Portland cement pastes prepared and cured with seawater. In: Materials and Structures, v. 55, n. 6 (26 June 2022).
- (2022): Improving the bonding capacity of recycled concrete aggregate by creating a reactive shell with aqueous carbonation. In: Construction and Building Materials, v. 315 (January 2022).
- (2021): Utilization of CO2 cured CSW-MSWIBA cold bonded aggregate into lightweight concrete products for masonry units. In: Construction and Building Materials, v. 276 (March 2021).
- (2022): Effects of seawater on UHPC: Macro and microstructure properties. In: Construction and Building Materials, v. 340 (July 2022).
- (2022): Carbonation-hardening properties and ITZ microstructure of low-calcium CO2 sequestration binder mortar. In: Construction and Building Materials, v. 336 (June 2022).
- (2021): An alternative method for performance improvement of ultra-high performance concrete by internal curing: Role of physicochemical properties of saturated lightweight fine aggregate. In: Construction and Building Materials, v. 312 (December 2021).
- (2022): Characteristics and production of semi-dry lightweight concrete with cold bonded aggregates made from recycling concrete slurry waste (CSW) and municipal solid waste incineration bottom ash (MSWIBA). In: Journal of Building Engineering, v. 45 (January 2022).
- (2021): Enhanced carbonation reactivity of wollastonite by rapid cooling process: Towards an ultra-low calcium CO2 sequestration binder. In: Construction and Building Materials, v. 299 (September 2021).
- (2021): Conceptual design and performance evaluation of high strength pervious concrete. In: Construction and Building Materials, v. 269 (February 2021).
- (2020): Experimental and numerical study on the compressive behavior of micro-expansive ultra-high-performance concrete-filled steel tube columns. In: Construction and Building Materials, v. 254 (September 2020).
- (2018): Experimental investigation on the autogenous shrinkage of steam cured ultra-high performance concrete. In: Construction and Building Materials, v. 162 (February 2018).
- (2012): Determination of water content in fresh concrete mix based on relative dielectric constant measurement. In: Construction and Building Materials, v. 34 (September 2012).
- (2016): Hydration monitoring and strength prediction of cement-based materials based on the dielectric properties. In: Construction and Building Materials, v. 126 (November 2016).
- (2017): Effect of aggregate exposing and curing agent on the performance of exposed aggregate concrete. In: Construction and Building Materials, v. 156 (December 2017).
- (2017): Hydration of quaternary phase-gypsum system. In: Construction and Building Materials, v. 152 (October 2017).
- (2017): Efficiency of metakaolin in steam cured high strength concrete. In: Construction and Building Materials, v. 152 (October 2017).
- (2019): Study on the hydration of young concrete based on dielectric property measurement. In: Construction and Building Materials, v. 196 (January 2019).
Structurae cooperates with
