- Post-earthquake Behavior of Steel Moment Resisting Frames with Connections Modified by Introducing Reduced Beam Section (RBS). In: International Journal of Steel Structures, v. 24, n. 3 (April 2024). (2024):
- Progressive Collapse Analysis of Intermediate Moment-Resisting Steel Frame under Fire-Induced Column Failure. In: Journal of Performance of Constructed Facilities (ASCE), v. 37, n. 4 (August 2023). (2023):
- Determination of Seismic Performance Factors for Buildings with Concentrically Braced Frame Systems under the Excitation of Near- and Far-fault Records. In: Periodica Polytechnica Civil Engineering. :
- Direct displacement-based design approach for isolated structures equipped with supplemental fluid viscous damper. In: Journal of Building Engineering, v. 45 (January 2022). (2022):
- Development of DDBD for steel MRFs using inelastic response-based seismic lateral force distribution. In: Journal of Building Engineering, v. 43 (November 2021). (2021):
- An improvement of direct displacement-based design approach for steel moment-resisting frames controlled by fluid viscous dampers. In: Advances in Structural Engineering, v. 24, n. 10 (February 2021). (2021):
- Optimal Design of Multiple Tuned Liquid Column Dampers for Seismic Vibration Control of MDOF Structures. In: Periodica Polytechnica Civil Engineering, v. 59, n. 4 ( 2015). (2015):
- Comparing Response of Special and Intermediate Moment Frames under Repeated Earthquakes. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 175, n. 11 (November 2022). (2022):
- Modified direct displacementābased design approach for structures equipped with fluid viscous damper. In: Structural Control and Health Monitoring, v. 27, n. 1 (19 December 2019). (2019):
- A pushover procedure for seismic assessment of buildings with bi-axial eccentricity under bi-directional seismic excitation. In: Soil Dynamics and Earthquake Engineering, v. 69 (February 2015). (2015):
- Ground motion scaling for seismic response analysis by considering inelastic response and contribution of the higher modes. In: Soil Dynamics and Earthquake Engineering, v. 110 (July 2018). (2018):
- Pushover analysis of asymmetric-plan buildings based on distribution of the combined modal story shear and torsional moment. In: Earthquake Engineering and Engineering Vibration, v. 13, n. 4 (December 2014). (2014):
- Modified Adaptive Modal Combination Procedure for Nonlinear Static Analysis of Bridges. In: Journal of Earthquake Engineering, v. 17, n. 6 ( 2013). (2013):
- An adaptive modal pushover procedure for asymmetric-plan buildings. In: Engineering Structures, v. 36 (March 2012). (2012):
- A story shear-based adaptive pushover procedure for estimating seismic demands of buildings. In: Engineering Structures, v. 32, n. 1 (January 2010). (2010):
- DGA-based approach for optimal design of active mass damper for nonlinear structures considering ground motion effect. In: Smart Materials and Structures, v. 24, n. 4 (April 2015). (2015):
- Story shear and torsional moment-based pushover procedure for asymmetric-plan buildings using an adaptive capacity spectrum method. In: Engineering Structures, v. 79 (November 2014). (2014):