Khan Shahzada 
- (2024): Innovative no-cure mortar for enhanced brick masonry performance: A mechanical properties analysis. In: Construction and Building Materials, v. 451 (November 2024).
- (2024): Evaluation of lateral strength capacity of cored interlocking block masonry piers under variable pre-compression loads. In: Structures, v. 70 (December 2024).
- (2024): Experimental study on the in-plane behavior of mud brick walls strengthened with bamboo strip mesh and dried jute thread. In: Structures, v. 68 (October 2024).
- (2023): Improvement in mechanical properties of brick masonry with the help of engineered cementous composites (ECCs). In: Asian Journal of Civil Engineering, v. 25, n. 2 (October 2023).
- (2023): Experimental assessment of retrofitted damaged mortarless dry stacked interlocking masonry walls. In: Soil Dynamics and Earthquake Engineering, v. 173 (October 2023).
- (2023): Restoring seismic capacity of damaged dry stacked Self-Interlocking masonry structure through ferrocement overlay. In: Engineering Structures, v. 293 (October 2023).
- (2023): Improving seismic capacity of dry stacked interlocking masonry structure through confinement at corners. In: Soil Dynamics and Earthquake Engineering, v. 165 (February 2023).
- (2023): Performance evaluation of the fresh and hardened properties of different PVA-ECC mixes: An experimental approach. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2022): Performance evaluation of confined dry-stacked block masonry against blast loading. In: Structures, v. 45 (November 2022).
- (2022): Mechanical and microstructure performance and global warming potential of blended concrete containing rice husk ash and silica fume. In: Construction and Building Materials, v. 346 (September 2022).
- (2013): Conservation of Islamia College Building in Pakistan. In: Procedia Engineering, v. 54 ( 2013).
- (2018): Seismic Capacity Assessment of Confined Brick Masonry Building: An Experimental Approach. In: Shock and Vibration, v. 2018 ( 2018).
- (2021): Impact of Length and Percent Dosage of Recycled Steel Fibers on the Mechanical Properties of Concrete. In: Civil Engineering Journal, v. 7, n. 10 (1 October 2021).
- (2021): Innovative seismic isolation of masonry infills using cellular material at the interface with the surrounding RC frame. In: Journal of Building Engineering, v. 40 (August 2021).
- (2021): Evaluation of code compliant/non-compliant ECC-RC IMRF structures. In: Structures, v. 32 (August 2021).
- (2021): Computational Seismic Analysis of Dry-Stack Block Masonry Wall. In: Civil Engineering Journal, v. 7, n. 3 (3 March 2021).
- (2021): In-plane Quasi-static Cyclic Load Tests on Reinforced Concrete Frame Panels with and without Brick Masonry Infill Walls. In: Journal of Earthquake Engineering, v. 26, n. 11 (May 2021).
- (2019): Confined and unreinforced masonry structures in seismic areas: Validation of macro models and cost analysis. In: Engineering Structures, v. 199 (November 2019).
- (2019): Optimal design of bridge columns constructed with engineered cementitious composites and Cu-Al-Mn superelastic alloys. In: Engineering Structures, v. 198 (November 2019).
- (2020): Development of Environment-Friendly Concrete through Partial Addition of Waste Glass Powder (WGP) as Cement Replacement. In: Civil Engineering Journal, v. 6, n. 12 (30 November 2020).
- (2020): Review of the Geological Strength Index (GSI) as an Empirical Classification and Rock Mass Property Estimation Tool: Origination, Modifications, Applications, and Limitations. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Numerical modeling of confined brick masonry structures with parametric analysis and energy absorption calculation. In: International Journal of Protective Structures, v. 12, n. 2 (December 2020).
- (2020): Effective use of micro-silica extracted from rice husk ash for the production of high-performance and sustainable cement mortar. In: Construction and Building Materials, v. 258 (October 2020).
- (2020): Conversion of Waste Marble Powder into a Binding Material. In: Civil Engineering Journal, v. 6, n. 3 (1 March 2020).
- (2019): Durability of Mortars Modified with Calcined Montmorillonite Clay. In: Civil Engineering Journal, v. 5, n. 7 (July 2019).
- (2018): Bending Behavior of Axially Preloaded Multilayered Spiral Strands. In: Journal of Engineering Mechanics (ASCE), v. 144, n. 12 (December 2018).
- (2014): Assessment of early-age autogenous shrinkage strains in concrete using bentonite clay as internal curing technique. In: Construction and Building Materials, v. 66 (September 2014).
- (2017): Effect of Elevated Temperature on Mechanical Properties of Limestone, Quartzite and Granite Concrete. In: International Journal of Concrete Structures and Materials, v. 11, n. 1 (February 2017).
- (2017): Retrofitting of Full-Scale Confined Masonry Building Using Ferro-Cement Overlay. In: Journal of Performance of Constructed Facilities (ASCE), v. 31, n. 5 (October 2017).
- (2018): Numerical Modeling for Engineering Analysis and Designing of Optimum Support Systems for Headrace Tunnel. In: Advances in Civil Engineering, v. 2018 ( 2018).
Structurae cooperates with
