0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Benjamin W. Schafer ORCID

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Fratamico, David C. / Torabian, Shahabeddin / Zhao, Xi / Rasmussen, Kim J. R. / Schafer, Benjamin W. (2018): Experimental study on the composite action in sheathed and bare built-up cold-formed steel columns. In: Thin-Walled Structures, v. 127 (June 2018).

    https://doi.org/10.1016/j.tws.2018.02.002

  2. Ádány, Sándor / Schafer, Benjamin W. (2023): A Fourier‐series numerical approach for the analysis of tubular members. In: ce/papers, v. 6, n. 3-4 (September 2023).

    https://doi.org/10.1002/cepa.2497

  3. Briggs, Nicholas E. / Avellaneda‐Ramirez, Raul E. / Coleman, Kyle / Schafer, Benjamin W. / Eatherton, Matthew R. / Easterling, W. Samuel / Hajjar, Jerome F. (2023): Cyclic Behavior of Composite Connections in Composite Floor Diaphragms. In: ce/papers, v. 6, n. 1 (February 2023).

    https://doi.org/10.1002/cepa.1937

  4. Akchurin, Damir / Sabelli, Rafael / Ziemian, Ronald D. / Schafer, Benjamin W. (2024): ASD and LRFD: Reliability comparison for designs subjected to wind loads. In: Journal of Constructional Steel Research, v. 213 (February 2024).

    https://doi.org/10.1016/j.jcsr.2023.108327

  5. Wei, Gengrui / Schafer, Benjamin W. / Seek, Michael / Eatherton, Matthew R. (2024): Evaluating the use of standing seam roof as beam lateral bracing. In: Journal of Constructional Steel Research, v. 212 (January 2024).

    https://doi.org/10.1016/j.jcsr.2023.108244

  6. Sabelli, Rafael / Ziemian, Ronald D. / Schafer, Benjamin W. (2024): ASD and LRFD lateral load combinations: Comparison of required strength and reliability for design of structural steel. In: Journal of Constructional Steel Research, v. 212 (January 2024).

    https://doi.org/10.1016/j.jcsr.2023.108210

  7. Eladly, Mohammed M. / Schafer, Benjamin W. (2023): Evaluation of Seismic Deflection Amplification Factor for Buildings Utilizing Cold-Formed Steel–Framed Shear Walls. In: Journal of Structural Engineering (ASCE), v. 149, n. 7 (July 2023).

    https://doi.org/10.1061/jsendh.steng-11987

  8. Abbasi, Mandana / Rasmussen, Kim J. R. / Khezri, Mani / Schafer, Benjamin W. (2023): Experimental investigation of the sectional buckling of built-up cold-formed steel columns. In: Journal of Constructional Steel Research, v. 203 (April 2023).

    https://doi.org/10.1016/j.jcsr.2023.107803

  9. Sangree, Rachel H. / Schafer, Benjamin W. (2006): Covered Wooden Bridges: A Modern Analysis at the System and Component Levels. Presented at: Structures Congress 2006, May 18-21, 2006, St. Louis, Missouri, United States.

    https://doi.org/10.1061/40889(201)151

  10. Padilla-Llano, David A. / Schafer, Benjamin W. / Hajjar, Jerome F. (2022): Cyclic fracture simulation through element deletion in structural steel systems. In: Journal of Constructional Steel Research, v. 189 (February 2022).

    https://doi.org/10.1016/j.jcsr.2021.107082

  11. Xia, Yu / Li, Zhanjie / Schafer, Benjamin W. / Blum, Hannah (2021): Experimental study on residual stresses of dual phase high‐strength cold‐formed steel angles. In: ce/papers, v. 4, n. 2-4 (September 2021).

    https://doi.org/10.1002/cepa.1307

  12. Zhang, Zhidong / Singh, Amanpreet / Derveni, Fani / Torabian, Shahabeddin / Peterman, Kara D. / Hutchinson, Tara C. / Schafer, Benjamin W. (2021): Cyclic experiments on isolated steel sheet connections for CFS framed steel sheet sheathed shear walls with new configurations. In: Engineering Structures, v. 244 (October 2021).

    https://doi.org/10.1016/j.engstruct.2021.112805

  13. Yu, Cheng / Schafer, Benjamin W. (2006): Effect of longitudinal stress gradient on the ultimate strength of thin plates. In: Thin-Walled Structures, v. 44, n. 7 (July 2006).

    https://doi.org/10.1016/j.tws.2006.05.010

  14. Ádány, Sándor / Schafer, Benjamin W. (2014): Generalized constrained finite strip method for thin-walled members with arbitrary cross-section: Primary modes. In: Thin-Walled Structures, v. 84 (November 2014).

    https://doi.org/10.1016/j.tws.2014.06.001

  15. Ádány, Sándor / Schafer, Benjamin W. (2014): Generalized constrained finite strip method for thin-walled members with arbitrary cross-section: Secondary modes, orthogonality, examples. In: Thin-Walled Structures, v. 84 (November 2014).

    https://doi.org/10.1016/j.tws.2014.06.002

  16. Torabian, Shahabeddin / Zheng, Baofeng / Schafer, Benjamin W. (2015): Experimental response of cold-formed steel lipped channel beam-columns. In: Thin-Walled Structures, v. 89 (April 2015).

    https://doi.org/10.1016/j.tws.2014.12.003

  17. Torabian, Shahabeddin / Fratamico, David. C. / Schafer, Benjamin W. (2016): Experimental response of cold-formed steel Zee-section beam-columns. In: Thin-Walled Structures, v. 98 (January 2016).

    https://doi.org/10.1016/j.tws.2015.10.016

  18. Schafer, Benjamin W. (2019): Advances in the Direct Strength Method of cold-formed steel design. In: Thin-Walled Structures, v. 140 (July 2019).

    https://doi.org/10.1016/j.tws.2019.03.001

  19. Yu, Cheng / Schafer, Benjamin W. (2007): Effect of Longitudinal Stress Gradients on Elastic Buckling of Thin Plates. In: Journal of Engineering Mechanics (ASCE), v. 133, n. 4 (April 2007).

    https://doi.org/10.1061/(asce)0733-9399(2007)133:4(452)

  20. Ayhan, Deniz / Schafer, Benjamin W. (2015): Cold-formed steel member bending stiffness prediction. In: Journal of Constructional Steel Research, v. 115 (December 2015).

    https://doi.org/10.1016/j.jcsr.2015.07.004

  21. Fratamico, David C. / Torabian, Shahabeddin / Zhao, Xi / Rasmussen, Kim J. R. / Schafer, Benjamin W. (2018): Experiments on the global buckling and collapse of built-up cold-formed steel columns. In: Journal of Constructional Steel Research, v. 144 (May 2018).

    https://doi.org/10.1016/j.jcsr.2018.01.007

  22. Ayhan, Deniz / Schafer, Benjamin W. (2017): Characterization of in-plane backbone response of cold-formed steel beams. In: Journal of Constructional Steel Research, v. 132 (May 2017).

    https://doi.org/10.1016/j.jcsr.2016.12.025

  23. Torabian, Shahabeddin / Schafer, Benjamin W. (2018): Development and Experimental Validation of the Direct Strength Method for Cold-Formed Steel Beam-Columns. In: Journal of Structural Engineering (ASCE), v. 144, n. 10 (October 2018).

    https://doi.org/10.1061/(asce)st.1943-541x.0002117

  24. Yu, Cheng / Schafer, Benjamin W. (2006): Distortional Buckling Tests on Cold-Formed Steel Beams. In: Journal of Structural Engineering (ASCE), v. 132, n. 4 (April 2006).

    https://doi.org/10.1061/(asce)0733-9445(2006)132:4(515)

  25. Trautner, Christopher / Ojdrovic, Rasko / Schafer, Benjamin W. / Jones, Nicholas P. (2013): Anatomy of a Collapse. In: Civil Engineering Magazine, v. 83, n. 4 (April 2013).

    https://doi.org/10.1061/ciegag.0000442

  26. Kechidi, Smail / Fratamico, David C. / Bourahla, Nouredine / Castro, José M. / Schafer, Benjamin W. (2017): 07.07: Numerical study of screw fasteners in built-up CFS chord studs. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.197

  27. Peterman, Kara D. / Stehman, Matthew J. J. / Madsen, Rob L. / Buonopane, Stephen G. / Nakata, Narutoshi / Schafer, Benjamin W. (2016): Experimental Seismic Response of a Full-Scale Cold-Formed Steel-Framed Building. II: Subsystem-Level Response. In: Journal of Structural Engineering (ASCE), v. 142, n. 12 (December 2016).

    https://doi.org/10.1061/(asce)st.1943-541x.0001578

  28. Peterman, Kara D. / Stehman, Matthew J. J. / Madsen, Rob L. / Buonopane, Stephen G. / Nakata, Narutoshi / Schafer, Benjamin W. (2016): Experimental Seismic Response of a Full-Scale Cold-Formed Steel-Framed Building. I: System-Level Response. In: Journal of Structural Engineering (ASCE), v. 142, n. 12 (December 2016).

    https://doi.org/10.1061/(asce)st.1943-541x.0001577

  29. Torabian, Shahabeddin / Xiao, Feng / Haws, Richard B. / Schafer, Benjamin W. (2018): Design of Transverse Fillet Welds in the Lapped Joints of Thin Steel Plates. In: International Journal of Steel Structures, v. 18, n. 1 ( 2018).

    https://doi.org/10.1007/s13296-018-0325-2

  30. Schafer, Benjamin W. (2011): Cold-formed steel structures around the world. In: Steel Construction, v. 4, n. 3 (August 2011).

    https://doi.org/10.1002/stco.201110019

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine