0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

H. E. M. Sallam

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Abdelaleem, A. / Moawad, M. / El-Emam, H. / Salim, H. / Sallam, H. E. M. (2024): Long term behavior of rubberized concrete under static and dynamic loads. In: Case Studies in Construction Materials, v. 20 (July 2024).

    https://doi.org/10.1016/j.cscm.2024.e03087

  2. Al-Tersawy, Sherif H. / El-Sadany, Rasha A. / Sallam, H. E. M. (2021): Experimental gamma-ray attenuation and theoretical optimization of barite concrete mixtures with nanomaterials against neutrons and gamma rays. In: Construction and Building Materials, v. 289 (June 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.123190

  3. Ali, A. Y. F. / El-Emam, H. M. / Seleem, M. H. / Sallam, H. E. M. / Moawad, M. (2022): Effect of crack and fiber length on mode I fracture toughness of matrix-cracked FRC beams. In: Construction and Building Materials, v. 341 (July 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.127924

  4. Mubaraki, M. A. / Abd-Elhady, A. A. / Osman, S. A. / Sallam, H. E. M. (2017): Mixed mode fracture behavior of concrete pavement containing RAP - 3D finite element analysis. In: Procedia Structural Integrity, v. 5 ( 2017).

    https://doi.org/10.1016/j.prostr.2017.07.054

  5. Alhazmi, Waleed H. / Abd-Elhady, Amr A. / Mousa, Saeed / Atta, M. / Abu-Sinna, A. / Bafakeeh, O. / Sallam, H. E. M. (2019): Notch Tensile Strength of Carbon Fiber/Epoxy Composite Plate with a Center Hole under Static and Cyclic Loading. In: Procedia Structural Integrity, v. 17 ( 2019).

    https://doi.org/10.1016/j.prostr.2019.08.039

  6. Moawad, M. / Baena, M. / Barris, C. / Torres, L. / Sallam, H. E. M. (2021): Time-dependent behavior of NSM strengthened RC beams under sustained loading. In: Engineering Structures, v. 247 (November 2021).

    https://doi.org/10.1016/j.engstruct.2021.113210

  7. Mubaraki, Muhammad / Osman, S. A. / Sallam, H. E. M. (2019): Effect of RAP content on flexural behavior and fracture toughness of flexible pavement. In: Latin American Journal of Solids and Structures, v. 16, n. 3 ( 2019).

    https://doi.org/10.1590/1679-78255516

  8. El-Mal, H. S. S. Abou / Sherbini, A. S. / Sallam, H. E. M. (2018): Structural Behavior of RC Beams Containing a Pre- Diagonal Tension Crack. In: Latin American Journal of Solids and Structures, v. 15, n. 7 (July 2018).

    https://doi.org/10.1590/1679-78254701

  9. Abd-Elhady, A. A. / Mubaraki, M. A. / Sallam, H. E. M. (2018): Progressive failure prediction of pinned joint in quasi-isotropic laminates used in pipelines. In: Latin American Journal of Solids and Structures, v. 15, n. 6 (July 2018).

    https://doi.org/10.1590/1679-78255061

  10. Khashaba, U. A. / Sallam, H. E. M. / Al-Shorbagy, A. E. / Seif, M. A. (2006): Effect of washer size and tightening torque on the performance of bolted joints in composite structures. In: Composite Structures, v. 73, n. 3 (June 2006).

    https://doi.org/10.1016/j.compstruct.2005.02.004

  11. Sharaky, I. A. / Selmy, S. A. I. / El-Attar, M. M. / Sallam, H. E. M. (2020): The influence of interaction between NSM and internal reinforcements on the structural behavior of upgrading RC beams. In: Composite Structures, v. 234 (February 2020).

    https://doi.org/10.1016/j.compstruct.2019.111751

  12. Reda, R. M. / Sharaky, I. A. / Ghanem, M. / Seleem, M. H. / Sallam, H. E. M. (2016): Flexural behavior of RC beams strengthened by NSM GFRP Bars having different end conditions. In: Composite Structures, v. 147 (July 2016).

    https://doi.org/10.1016/j.compstruct.2016.03.018

  13. Sharaky, I. A. / Torres, L. / Sallam, H. E. M. (2015): Experimental and analytical investigation into the flexural performance of RC beams with partially and fully bonded NSM FRP bars/strips. In: Composite Structures, v. 122 (April 2015).

    https://doi.org/10.1016/j.compstruct.2014.11.057

  14. Sallam, H. E. M. / Badawy, A. A. M. / Saba, A. M. / Mikhail, F. A. (2010): Flexural behavior of strengthened steel–concrete composite beams by various plating methods. In: Journal of Constructional Steel Research, v. 66, n. 8-9 (August 2010).

    https://doi.org/10.1016/j.jcsr.2010.03.005

  15. Sharaky, I. A. / Reda, R. M. / Ghanem, M. / Seleem, M. H. / Sallam, H. E. M. (2017): Experimental and numerical study of RC beams strengthened with bottom and side NSM GFRP bars having different end conditions. In: Construction and Building Materials, v. 149 (September 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.05.192

  16. Abou El-Mal, H. S. S. / Sherbini, A. S. / Sallam, H. E. M. (2015): Mode II Fracture Toughness of Hybrid FRCs. In: International Journal of Concrete Structures and Materials, v. 9, n. 4 (December 2015).

    https://doi.org/10.1007/s40069-015-0117-4

  17. Sallam, H. E. M. / Ahmad, S. S. E. / Badawy, A. A. M. / Mamdouh, W. (2006): Evaluation of Steel I-Beams Strengthened by Various Plating Methods. In: Advances in Structural Engineering, v. 9, n. 4 (August 2006).

    https://doi.org/10.1260/136943306778812796

  18. Sharaky, I. A. / Baena, M. / Barris, C. / Sallam, H. E. M. / Torres, L. (2018): Effect of axial stiffness of NSM FRP reinforcement and concrete cover confinement on flexural behaviour of strengthened RC beams: Experimental and numerical study. In: Engineering Structures, v. 173 (October 2018).

    https://doi.org/10.1016/j.engstruct.2018.07.062

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine