Keri L. Ryan 
- (2023): Analysis of effect of vertical ground shaking in bridges isolated with spherical sliding bearings. In: Earthquake Engineering and Structural Dynamics, v. 52, n. 15 (6 November 2023).
- (2016): Influence of Vertical Ground Shaking on Horizontal Response of Seismically Isolated Buildings with Friction Bearings. In: Journal of Structural Engineering (ASCE), v. 142, n. 1 (January 2016).
- (2022): Effect of partition walls on the seismic response of mass-timber buildings with a post-tensioned rocking wall system. In: Engineering Structures, v. 262 (July 2022).
- (2021): Experimental Cyclic Test of Reduced Damage Detailed Drywall Partition Walls Integrated with a Timber Rocking Wall. In: Journal of Earthquake Engineering, v. 26, n. 10 (July 2021).
- (2021): Full-Scale Shake Table Test Damage Data Collection Using Terrestrial Laser-Scanning Techniques. In: Journal of Structural Engineering (ASCE), v. 147, n. 3 (March 2021).
- (2000): Isolated Buildings and the 1997 UBC Near-Source Factors. In: Earthquake Spectra, v. 16, n. 2 (May 2000).
- (2020): Evaluation of design modifications for enhanced repairability of reinforced concrete walls. In: Engineering Structures, v. 206 (March 2020).
- (2020): Bridge Temperature Profiles Revisited: Thermal Analyses Based on Recent Meteorological Data from Nevada. In: Journal of Bridge Engineering (ASCE), v. 25, n. 1 (January 2020).
- (2011): Experimental Evaluation of an Innovative Isolation System for a Lightweight Steel Moment Frame Building at E-Defense. Presented at: Structures Congress 2011, Las Vegas, Nevada, April 14-16, 2011.
- (2019): Evaluating simplified models in predicting global seismic responses of a shake table-test building isolated by triple friction pendulum bearings. In: Earthquake Engineering and Structural Dynamics, v. 48, n. 6 (May 2019).
- (2009): Evaluation of Approaches to Characterize Seismic Isolation Systems for Design. In: Journal of Earthquake Engineering, v. 13, n. 6 ( 2009).
- (2008): Distribution of Lateral Forces in Base-Isolated Buildings Considering Isolation System Nonlinearity. In: Journal of Earthquake Engineering, v. 12, n. 7 ( 2008).
- (2010): Analysis and Design of Inter-Story Isolation Systems with Nonlinear Devices. In: Journal of Earthquake Engineering, v. 14, n. 7 ( 2010).
- (2013): Feasibility study of a gap damper to control seismic isolator displacements in extreme earthquakes. In: Structural Control and Health Monitoring, v. 20, n. 8 (August 2013).
- (2011): Demonstration of robust stability and performance of filter-enhanced H2/LQG controllers for a nonlinear structure. In: Structural Control and Health Monitoring, v. 18, n. 6 (October 2011).
- (2019): ASCE 7-16 Lateral Force Distribution Equations for Static Design of Seismically Isolated Buildings. In: Journal of Structural Engineering (ASCE), v. 145, n. 2 (February 2019).
- (2015): Development and experimental evaluation of a passive gap damper device to prevent pounding in base-isolated structures. In: Earthquake Engineering and Structural Dynamics, v. 44, n. 11 (September 2015).
- (2002): Approximate analysis methods for asymmetric plan base-isolated buildings. In: Earthquake Engineering and Structural Dynamics, v. 31, n. 1 (January 2002).
- (2018): Computational simulation of slab vibration and horizontal-vertical coupling in a full-scale test bed subjected to 3D shaking at E-Defense. In: Earthquake Engineering and Structural Dynamics, v. 47, n. 2 (February 2018).
- (2004): Estimating the seismic displacement of friction pendulum isolators based on non-linear response history analysis. In: Earthquake Engineering and Structural Dynamics, v. 33, n. 3 (March 2004).
- (2004): Estimation of seismic demands on isolators in asymmetric buildings using non-linear analysis. In: Earthquake Engineering and Structural Dynamics, v. 33, n. 3 (March 2004).
- (2011): Comparative response assessment of minimally compliant low-rise conventional and base-isolated steel frames. In: Earthquake Engineering and Structural Dynamics, v. 40, n. 10 (August 2011).
- (2011): Effects of torsion on the behavior of peripheral steel-braced frame systems. In: Earthquake Engineering and Structural Dynamics, v. 40, n. 5 (25 April 2011).
- (2006): Estimating bearing response in symmetric and asymmetric-plan isolated buildings with rocking and torsion. In: Earthquake Engineering and Structural Dynamics, v. 35, n. 8 (10 July 2006).
- (2014): Computational Simulation of a Full-Scale, Fixed-Base, and Isolated-Base Steel Moment Frame Building Tested at E-Defense. In: Journal of Structural Engineering (ASCE), v. 140, n. 8 (August 2014).
- (2004): Estimation of Seismic Demands on Isolators Based on Nonlinear Analysis. In: Journal of Structural Engineering (ASCE), v. 130, n. 3 (March 2004).
- (2011): Comparative Response Assessment of Minimally Compliant Low-Rise Base-Isolated and Conventional Steel Moment-Resisting Frame Buildings. In: Journal of Structural Engineering (ASCE), v. 137, n. 10 (October 2011).
- (2006): Estimating Seismic Demands for Isolation Bearings with Building Overturning Effects. In: Journal of Structural Engineering (ASCE), v. 132, n. 7 (July 2006).
- (2009): Comparative Evaluation of Base-Isolated and Fixed-Base Buildings Using a Comprehensive Response Index. In: Journal of Structural Engineering (ASCE), v. 135, n. 6 (June 2009).
- (2017): Evaluation of a passive gap damper to control displacements in a shaking test of a seismically isolated three-story frame. In: Earthquake Engineering and Structural Dynamics, v. 46, n. 1 (January 2017).
Structurae cooperates with
