Shaoqin Ruan 
- (2024): Nano-modified recycled aggregates via vacuum impregnation: Towards stronger and durable recycled concrete. In: Journal of Building Engineering, v. 94 (October 2024).
- (2024): Enhancing water resistance in magnesium oxychloride cement modified with sodium dihydrogen phosphate at low MgO concentrations. In: Construction and Building Materials, v. 440 (August 2024).
- (2024): The influence of nano-silica composite superabsorbent polymer on the autogenous shrinkage of mortar. In: Construction and Building Materials, v. 442 (September 2024).
- (2024): Assessing the influence of external curing on the early drying shrinkage of ultra-high-performance concrete. In: Journal of Building Engineering, v. 89 (July 2024).
- (2023): Pore structures and interfacial properties between hydrated magnesia carbonates-modified recycled aggregate and reactive magnesia paste. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): Effects of kaolin-modified superabsorbent polymers on mortar properties. In: Journal of Building Engineering, v. 79 (November 2023).
- (2024): Chloride-induced corrosion patterns of reinforcements in simulated pore solutions of calcium sulfoaluminate cement concrete: An analytical study. In: Journal of Building Engineering, v. 82 (April 2024).
- (2023): Experimental and theoretical analyses of chloride transport in recycled concrete subjected to a cyclic drying-wetting environment. In: Structures, v. 52 (June 2023).
- (2019): Autogenous healing of fiber-reinforced reactive magnesia-based tensile strain-hardening composites. In: Cement and Concrete Research, v. 115 (January 2019).
- (2023): Performance buildup of reactive magnesia cement (RMC) formulation via using CO2-strengthened recycled concrete aggregates (RCA). In: Journal of Building Engineering, v. 65 (April 2023).
- (2023): Powder gradation effect on the fresh, mechanical, and early-age shrinkage properties of UHPC. In: Journal of Building Engineering, v. 67 (May 2023).
- (2023): Effects of Ca(OH)2 on the reinforcement corrosion of sulfoaluminate cement mortar. In: Materials and Structures, v. 56, n. 1 (30 January 2023).
- (2022): Application potential of granite cutting waste and tunnel excavation rock as fine aggregates in cement-based materials based on surface characteristics. In: Journal of Building Engineering, v. 62 (December 2022).
- (2023): Milled Waste Glass Powder in Magnesium-Silicate-Hydrate Cement: Technical and Environmental Assessment. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 1 (January 2023).
- (2022): Effects of red mud on workability and mechanical properties of autoclaved aerated concrete (AAC). In: Journal of Building Engineering, v. 61 (December 2022).
- (2022): Performances of UHPC bonded cementitious composite systems containing styrene-butadiene rubber latex in a chloride-rich environment. In: Construction and Building Materials, v. 353 (October 2022).
- (2022): Investigation of early drying shrinkage of ultrahigh-performance concrete under windy conditions. In: Journal of Building Engineering, v. 57 (October 2022).
- (2022): Is early drying shrinkage still determined by the mesopore content? A case study of cement paste with minerals. In: Journal of Building Engineering, v. 50 (June 2022).
- (2022): Performance buildup of concrete cured under low-temperatures: Use of a new nanocomposite accelerator and its application. In: Construction and Building Materials, v. 335 (June 2022).
- (2022): Characterization of historical mortar from ancient city walls of Xindeng in Fuyang, China. In: Construction and Building Materials, v. 315 (January 2022).
- (2021): Evaluation of Mechanical Properties of Concrete after Exposure to Elevated Temperatures Using Ultrasonic Pulse Velocity Measurement and a Split-Hopkinson Pressure Bar. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 12 (December 2021).
- (2021): Effects of cyclic seawater exposure on the mechanical performance and chloride penetration of calcium sulfoaluminate concrete. In: Construction and Building Materials, v. 303 (October 2021).
- (2021): The effects of lithium slag on microstructure and mechanical performance of metakaolin-based geopolymers designed by response surface method (RSM). In: Construction and Building Materials, v. 299 (September 2021).
- (2021): Influence of crack width on the stiffness recovery and self-healing of reactive magnesia-based binders under CO2-H2O conditioning. In: Construction and Building Materials, v. 269 (February 2021).
- (2020): Improvement of the performance and microstructural development of alkali-activated slag blends. In: Construction and Building Materials, v. 261 (November 2020).
- (2020): Influence of precast foam on the pore structure and properties of fly ash-based geopolymer foams. In: Construction and Building Materials, v. 256 (September 2020).
- (2019): Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing. In: Construction and Building Materials, v. 221 (October 2019).
- (2014): Mechanical performance evaluation of polyester fiber and SBR latex compound-modified cement concrete road overlay material. In: Construction and Building Materials, v. 63 (July 2014).
- (2018): Comparison of the Environmental Impacts of Reactive Magnesia and Calcined Dolomite and Their Performance under Different Curing Conditions. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 11 (November 2018).
- (2017): Performance and Microstructure of Calcined Dolomite and Reactive Magnesia-Based Concrete Samples. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 12 (December 2017).
Structurae cooperates with
