Pavla Rovnaníková 
- (2023): Lightweight pumice mortars for repair of historic buildings –Assessment of physical parameters, engineering properties and durability. In: Construction and Building Materials, v. 404 (November 2023).
- (2022): Effect of petrographic composition and chemistry of aggregate on the local and general fracture response of cementitious composites. In: Frattura ed Integrità Strutturale, v. 16, n. 60 (25 March 2022).
- (2021): Model uncertainty in diffusion coefficient for chloride ingress into concrete. In: Procedia Structural Integrity, v. 31 ( 2021).
- (2021): Fracture parameters of alkali-activated aluminosilicate composites with ceramic precursor: durability aspects. In: Procedia Structural Integrity, v. 33 ( 2021).
- (2021): Influence of rock inclusion composition on the fracture response of cement-based composite specimens. In: Procedia Structural Integrity, v. 33 ( 2021).
- (2022): Correlation between surface concentration of chloride ions and chloride deposition rate in concrete. In: Construction and Building Materials, v. 320 (February 2022).
- (2020): Extended evaluation of durability-related field inspection data from concrete bridges under service. In: Procedia Structural Integrity, v. 26 ( 2020).
- (2015): Engineering properties of composite materials containing waste ceramic dust from advanced hollow brick production as a partial replacement of Portland cement. In: Journal of Building Physics, v. 40, n. 1 (November 2015).
- (2005): Thermal and Hygric Parameters of Carbon-fiber-reinforced Cement Composites after Thermal and Mechanical Loading. In: Journal of Building Physics, v. 29, n. 2 (October 2005).
- (2020): Non-hydrophobized perlite renders for repair and thermal insulation purposes: Influence of different binders on their properties and durability. In: Construction and Building Materials, v. 263 (December 2020).
- (2018): High-strength concrete based on ternary binder with high pozzolan content. In: Structural Concrete, v. 19, n. 5 (October 2018).
- (2007): Flue gas desulfurization gypsum: Study of basic mechanical, hydric and thermal properties. In: Construction and Building Materials, v. 21, n. 7 (July 2007).
- (2009): High performance concrete containing lower slag amount: A complex view of mechanical and durability properties. In: Construction and Building Materials, v. 23, n. 6 (June 2009).
- (2010): High performance concrete with Czech metakaolin: Experimental analysis of strength, toughness and durability characteristics. In: Construction and Building Materials, v. 24, n. 8 (August 2010).
- (2012): Mechanical, fracture-mechanical, hydric, thermal, and durability properties of lime–metakaolin plasters for renovation of historical buildings. In: Construction and Building Materials, v. 31 (June 2012).
- (2013): Characterization of alkali activated slag paste after exposure to high temperatures. In: Construction and Building Materials, v. 47 (October 2013).
- (2014): Physico-mechanical and microstructural properties of rehydrated blended cement pastes. In: Construction and Building Materials, v. 54 (March 2014).
- (2016): Pozzolanic properties of brick powders and their effect on the properties of modified lime mortars. In: Construction and Building Materials, v. 120 (September 2016).
- (2009): Modeling of Chloride Concentration Effect on Reinforcement Corrosion. In: Computer-Aided Civil and Infrastructure Engineering, v. 24, n. 6 (August 2009).
- (2018): Rheological properties and microstructure of binary waste red brick powder/metakaolin geopolymer. In: Construction and Building Materials, v. 188 (November 2018).
- (2006): Effect of pozzolanic admixtures on mechanical, thermal and hygric properties of lime plasters. In: Construction and Building Materials, v. 20, n. 10 (December 2006).
- (2016): Mechanical, durability and hygrothermal properties of concrete produced using Portland cement-ceramic powder blends. In: Structural Concrete, v. 17, n. 1 (February 2016).
Structurae cooperates with
