Qiang Ren 
- (2024): Interface mechanical properties of CFRP-seawater sea sand concrete under simulated seawater immersion. In: Journal of Building Engineering, v. 97 (November 2024).
- (2024): Synergetic optimizing particle size distributions of aggregate and cementitious materials: Toward lower chloride diffusivity of concrete. In: Construction and Building Materials, v. 436 (July 2024).
- (2024): Limestone filler as a mineral additive on the compressive strength and durability of self-compacting concrete with limestone manufactured sand. In: Journal of Building Engineering, v. 94 (October 2024).
- (2024): Effect of Internal Curing with Superabsorbent Polymers on the Compressive Strength and Shrinkage of Concrete with Natural Volcanic Ash. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 6 (June 2024).
- (2023): Preparation and mechanism of tartaric acid-intercalated hydrotalcite retarder for oil-well cement. In: Construction and Building Materials, v. 399 (October 2023).
- (2023): Insight into the synergic effects of circulating fluidized bed fly ash, red mud and blast furnace slag in preparation of ultrahigh-performance concrete: Reaction mechanism and performance optimization. In: Construction and Building Materials, v. 403 (November 2023).
- (2024): Adhesive and rheological properties of fresh mortar with manufactured sand as replacement of river sand. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Influence of graphene oxide on the self-healing of cement paste fractures in CCUS cementing: A combined analysis of experiments and molecular dynamics simulations. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): Comparison of printability and mechanical properties of rigid and flexible fiber-reinforced 3D printed cement-based materials. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Extending 3D concrete printing to hard rock tunnel linings: Adhesion of fresh cementitious materials for different surface inclinations. In: Automation in Construction, v. 149 (May 2023).
- (2022): Comparison and Cost Analysis of Soft Soil Foundation Treatment Schemes in Port Construction. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2021): Properties and microstructure of CO2 activated binder produced by recycling phosphorous slag. In: Construction and Building Materials, v. 282 (May 2021).
- (2022): Evaluating the stiffening effect of CSA and sodium carbonate on the printability of OPC mortar. In: Construction and Building Materials, v. 328 (April 2022).
- (2021): Enhancing thixotropy and structural build-up of alkali-activated slag/fly ash pastes with nano clay. In: Materials and Structures, v. 54, n. 4 (2 July 2021).
- (2021): Thermal-mechanical coupling-oriented system reliability optimization of composite structures. In: Composite Structures, v. 270 (August 2021).
- (2021): Prediction of Compressive Strength of Concrete with Manufactured Sand by Ensemble Classification and Regression Tree Method. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 7 (July 2021).
- (2020): State-of-the-art review on properties evolution and deterioration mechanism of concrete at cryogenic temperature. In: Construction and Building Materials, v. 257 (October 2020).
- (2021): Determination of specific surface area of irregular aggregate by random sectioning and its comparison with conventional methods. In: Construction and Building Materials, v. 273 (March 2021).
- (2021): Effects of redispersible polymer powders on the structural build-up of 3D printing cement paste with and without hydroxypropyl methylcellulose. In: Construction and Building Materials, v. 267 (January 2021).
- (2020): Effects of fibers on flexural strength of ultra-high-performance concrete subjected to cryogenic attack. In: Construction and Building Materials, v. 265 (December 2020).
- (2020): Modeling and simulation of DEHS aerosol filtration by a three-dimensional knitted spacer air filter. In: Building and Environment, v. 186 (December 2020).
- (2020): Role of Limestone Powder in Early-Age Cement Paste Considering Fineness Effects. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 10 (October 2020).
- (2020): Cement-based composite with humidity adsorption and formaldehyde removal functions as an indoor wall material. In: Construction and Building Materials, v. 247 (June 2020).
- (2020): Performance and ITZ of pervious concrete modified by vinyl acetate and ethylene copolymer dispersible powder. In: Construction and Building Materials, v. 235 (February 2020).
- (2019): Incorporation of bamboo charcoal for cement-based humidity adsorption material. In: Construction and Building Materials, v. 215 (August 2019).
- (2019): Multi-level diffusion model for manufactured sand mortar considering particle shape and limestone powder effects. In: Construction and Building Materials, v. 207 (May 2019).
- (2019): Effect of triethanolamine hydrochloride on the performance of cement paste. In: Construction and Building Materials, v. 200 (March 2019).
- (2019): Fresh and hardened properties of self-compacting concrete using silicon carbide waste as a viscosity-modifying agent. In: Construction and Building Materials, v. 200 (March 2019).
Structurae cooperates with
