Jie Ren 
- (2024): The effects of calcium carbonate on sodium metasilicate-activated metakaolin-based geopolymer pastes. In: Construction and Building Materials, v. 448 (October 2024).
- (2024): Influence of aggregate content and strain rate on dynamic behaviour and energy consumption characteristics of concrete. In: Magazine of Concrete Research, v. 76, n. 22 (November 2024).
- (2024): Experimental Study on the Hysteretic Behavior of Replaceable Mild Steel Dissipaters Under Cyclic Tensile–Compression Loading. In: International Journal of Civil Engineering, v. 22, n. 9 (May 2024).
- (2024): The excellent adaptability to large temperature differences of alkali-activated slag using Na2SO4+ Ca(OH)2 as the activator. In: Construction and Building Materials, v. 431 (June 2024).
- (2023): Corrosion protection of steel bar enabled by monofluorophosphate-bearing composites with sustained-release capability. In: Journal of Building Engineering, v. 80 (December 2023).
- (2024): Effect of Seepage Differential Pressure on Permeability Evolution of Tunnel Lining Fracture under Hydraulic–Mechanical Coupling Process. In: Journal of Engineering Mechanics (ASCE), v. 150, n. 1 (January 2024).
- (2023): Experimental evaluation of alkali-activated and portland cement-based mortars prepared using waste glass powder in replacement of fly ash. In: Construction and Building Materials, v. 394 (August 2023).
- (2023): Manufacture of alkali-activated cementitious materials using municipal solid waste incineration (MSWI) ash: Immobilization of heavy metals in MSWI fly ash by MSWI bottom ash. In: Construction and Building Materials, v. 392 (August 2023).
- (2022): Degradation resistance of different cementitious materials to phosphoric acid attack at early stage. In: Cement and Concrete Research, v. 151 (January 2022).
- (2022): Combining Deep Fully Convolutional Network and Graph Convolutional Neural Network for the Extraction of Buildings from Aerial Images. In: Buildings, v. 12, n. 12 (1 December 2022).
- (2023): Lithium slag-based geopolymer synthesized with hybrid solid activators. In: Construction and Building Materials, v. 365 (February 2023).
- (2022): Influence of initial defects on the degradation of steel reinforced mortar exposed to cyclic wetting and drying environment based on 3D scanning. In: Construction and Building Materials, v. 325 (March 2022).
- (2021): Effect of a novel hybrid TiO2-graphene composite on enhancing mechanical and durability characteristics of alkali-activated slag mortar. In: Construction and Building Materials, v. 275 (March 2021).
- (2022): Combined Effects of Sulfate and Chloride Attack on Steel Reinforced Mortar under Drying–Immersion Cycles. In: Buildings, v. 12, n. 8 (31 July 2022).
- (2022): Characterization of one-part alkali-activated slag with rice straw ash. In: Construction and Building Materials, v. 345 (August 2022).
- (2021): Effects of natural seawater mixing on the properties of alkali-activated slag binders. In: Construction and Building Materials, v. 294 (August 2021).
- (2021): Mechanical and durability-related performance of graphene/epoxy resin and epoxy resin enhanced OPC mortar. In: Construction and Building Materials, v. 282 (May 2021).
- (2022): Alkali-activated binders based on incinerator bottom ash combined with limestone-calcined clay or fly ash. In: Construction and Building Materials, v. 320 (February 2022).
- (2021): Experimental comparisons between one-part and normal (two-part) alkali-activated slag binders. In: Construction and Building Materials, v. 309 (November 2021).
- (2021): Degradation of Alkali-Activated Slag and Fly Ash Mortars under Different Aggressive Acid Conditions. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 7 (July 2021).
- (2021): A novel titania/graphene composite applied in reinforcing microstructural and mechanical properties of alkali-activated slag. In: Journal of Building Engineering, v. 41 (September 2021).
- (2019): Incorporating online monitoring data into fast prediction models towards the development of artificial intelligent ventilation systems. In: Sustainable Cities and Society, v. 47 (May 2019).
- (2020): Mechanical and interface bonding properties of epoxy resin reinforced Portland cement repairing mortar. In: Construction and Building Materials, v. 264 (December 2020).
- (2020): Development of self-adaptive low-dimension ventilation models using OpenFOAM: Towards the application of AI based on CFD data. In: Building and Environment, v. 171 (March 2020).
- (2020): Constructing a novel nano-TiO2/Epoxy resin composite and its application in alkali-activated slag/fly ash pastes. In: Construction and Building Materials, v. 232 (January 2020).
- (2020): Degradation process of alkali-activated slag/fly ash and Portland cement-based pastes exposed to phosphoric acid. In: Construction and Building Materials, v. 232 (January 2020).
- (2019): Evaluation of inherent factors on flowability, cohesiveness and strength of cementitious mortar in presence of zeolite powder. In: Construction and Building Materials, v. 214 (July 2019).
- (2019): Deformation and Mechanical Behaviors of SCSF and CCCF Rectangular Thin Plates Loaded by Hydrostatic Pressure. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Experimental investigation on sea sand concrete-filled stainless steel tubular stub columns. In: Journal of Constructional Steel Research, v. 155 (April 2019).
- (2011): Estimation of turbulent kinetic energy dissipation rate in the bottom boundary layer of the Pearl River Estuary. In: China Ocean Engineering, v. 25, n. 4 (December 2011).
Structurae cooperates with
