Khuram Rashid 
- (2024): Load bearing geopolymer from agro-waste and its energy-environmental- economic (E3) performance: Application through building information modeling. In: Construction and Building Materials, v. 440 (August 2024).
- (2024): One-part alkali activated binder activated by sodium metasilicate and ternary-factored sustainability of structural block. In: Structures, v. 68 (October 2024).
- (2024): Development and sustainability assessment of red mud-based green bricks: Techno-economic and environmental performance. In: Journal of Building Engineering, v. 95 (October 2024).
- (2024): Developing High-Strength Geopolymer using Least Activator and Pressure-Applied Casting: Techno-Enviro-Economic Performance. In: Journal of Advanced Concrete Technology, v. 22, n. 6 (5 June 2024).
- (2023): Feasibility assessment of microwave-cured lightweight aggregate concrete by mineral encapsulated self-healing. In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Interfacial Performance between Repairing Mortars and Substrate Lime: Bond Strength and Carbonation. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 5 (May 2023).
- (2022): Multicriterial life cycle assessment of eco-efficient self-compacting concrete modified by waste perlite powder and/or recycled concrete aggregate. In: Construction and Building Materials, v. 348 (September 2022).
- (2022): Physico-mechanical performance of fly ash based geopolymer brick: Influence of pressure − temperature − time. In: Journal of Building Engineering, v. 50 (June 2022).
- (2022): Novel approach to synthesize clay-based geopolymer brick: Optimizing molding pressure and precursors’ proportioning. In: Construction and Building Materials, v. 322 (March 2022).
- (2021): Production of sustainable green mortar by ultrahigh utilization of fly ash: Technical, economic and environmental assessment. In: Construction and Building Materials, v. 281 (April 2021).
- (2022): Integrating technical-environmental-economical perspectives for optimizing rubber content in concrete by multi-criteria analysis. In: Construction and Building Materials, v. 319 (February 2022).
- (2021): Debonding damage detection of the CFRP-concrete interface based on piezoelectric ceramics by the electromechanical impedance method. In: Construction and Building Materials, v. 303 (October 2021).
- (2021): Comparative study on prestress loss and flexural performance of rectangular and T beam strengthened by prestressing CFRP plate. In: Composite Structures, v. 262 (April 2021).
- (2021): Assessment of morphological characteristics and physico-mechanical properties of geopolymer green foam lightweight aggregate formulated by microwave irradiation. In: Journal of Building Engineering, v. 35 (March 2021).
- (2019): Experimental and analytical study on the flexural performance of CFRP-strengthened RC beams at various pre-stressing levels. In: Composite Structures, v. 227 (November 2019).
- (2019): Influence of continuous and cyclic temperature durations on the performance of polymer cement mortar and its composite with concrete. In: Composite Structures, v. 215 (May 2019).
- (2020): Formulation and characterization of geopolymer and conventional lightweight green concrete by incorporating synthetic lightweight aggregate. In: Journal of Building Engineering, v. 31 (September 2020).
- (2020): Experimental investigation of the bond strength between new to old concrete using different adhesive layers. In: Construction and Building Materials, v. 249 (July 2020).
- (2018): Influence of organic agents to compressive strength of cement mortar. In: Construction and Building Materials, v. 175 (June 2018).
- (2020): Moving towards resource conservation by automated prioritization of concrete mix design. In: Construction and Building Materials, v. 236 (March 2020).
- (2020): Physico-mechanical performance and durability of artificial lightweight aggregates synthesized by cementing and geopolymerization. In: Construction and Building Materials, v. 232 (January 2020).
- (2020): Influence of fluxing oxides from waste on the production and physico-mechanical properties of fired clay brick: A review. In: Journal of Building Engineering, v. 27 (January 2020).
- (2019): Experimental and finite element analysis on thermal conductivity of burnt clay bricks reinforced with fibers. In: Construction and Building Materials, v. 221 (October 2019).
- (2015): Experimental and analytical investigations on the behavior of interface between concrete and polymer cement mortar under hygrothermal conditions. In: Construction and Building Materials, v. 94 (September 2015).
- (2016): Investigation on concrete-PCM interface under elevated temperature: At material level and member level. In: Construction and Building Materials, v. 125 (October 2016).
- (2017): Experimental and analytical selection of sustainable recycled concrete with ceramic waste aggregate. In: Construction and Building Materials, v. 154 (November 2017).
- (2019): Attribution of molasses dosage on fresh and hardened performance of recycled aggregate concrete. In: Construction and Building Materials, v. 197 (February 2019).
- (2017): Compressive strength evaluation by non-destructive techniques: An automated approach in construction industry. In: Journal of Building Engineering, v. 12 (July 2017).
- (2017): Experimental and Analytical Investigation of Crack Spacing and Width for Overlaid RC Beams at Elevated Temperatures. In: Journal of Structural Engineering (ASCE), v. 143, n. 12 (December 2017).
- (2017): Influence of steel fibers extracted from waste tires on shear behavior of reinforced concrete beams. In: Structural Concrete, v. 18, n. 4 (August 2017).
Structurae cooperates with
