Farshad Rajabipour 
- (2025): Autogenous and drying shrinkage in Ultra-High-Performance Concrete (UHPC) and the effectiveness of internal curing. In: Construction and Building Materials, v. 464 (February 2025).
- (2024): Phase identification and micromechanical properties of non-traditional and natural pozzolan based alkali-activated materials. In: Construction and Building Materials, v. 441 (August 2024).
- (2024): Prediction of the R3 Test-Based Reactivity of Supplementary Cementitious Materials: A Machine Learning Approach Utilizing Physical and Chemical Properties. In: International Journal of Concrete Structures and Materials, v. 18, n. 1 (2 January 2024).
- (2024): Passing of the Torch. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 10 (October 2024).
- (2016): Field Investigation of In-Service Performance of Concrete Bridge Decks in Pennsylvania. In: Transportation Research Record: Journal of the Transportation Research Board, v. 2577, n. 1 (January 2016).
- (2023): Non-traditional aluminosilicate based alkali-activated mortars - statistical optimization of solution parameters and processing conditions for optimal compressive strength, workability and setting time. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Performance Evaluation of Novel Alkali-Silica Reaction Inhibiting Chemical Admixtures in Cementitious Systems. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 9 (September 2023).
- (2017): The influence of alkali–silica reaction (ASR) gel composition on its hydrophilic properties and free swelling in contact with water vapor. In: Cement and Concrete Research, v. 94 (April 2017).
- (2016): Composition–rheology relationships in alkali–silica reaction gels and the impact on the gel's deleterious behavior. In: Cement and Concrete Research, v. 83 (May 2016).
- (2016): Effect of calcium on dissolution and precipitation reactions of amorphous silica at high alkalinity. In: Cement and Concrete Research, v. 87 (September 2016).
- (2012): Quantifying the effects of crack width, tortuosity, and roughness on water permeability of cracked mortars. In: Cement and Concrete Research, v. 42, n. 2 (February 2012).
- (2008): Interactions between shrinkage reducing admixtures (SRA) and cement paste's pore solution. In: Cement and Concrete Research, v. 38, n. 5 (May 2008).
- (2015): Alkali–silica reaction: Current understanding of the reaction mechanisms and the knowledge gaps. In: Cement and Concrete Research, v. 76 (October 2015).
- (2022): Evaluation and beneficiation of high sulfur and high alkali fly ashes for use as supplementary cementitious materials in concrete. In: Construction and Building Materials, v. 339 (July 2022).
- (2006): Linking Health Monitoring in Concrete Structures with Durability Performance Simulations. Presented at: Structures Congress 2006, May 18-21, 2006, St. Louis, Missouri, United States.
- (2022): Creep of alkali-activated cement mixtures. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2014): Comparative Life Cycle Assessment of Conventional, Glass Powder, and Alkali-Activated Slag Concrete and Mortar. In: Journal of Infrastructure Systems, v. 20, n. 4 (December 2014).
- (2019): Effect of activator, curing and humidity on drying shrinkage of alkali-activated fly ash. In: Green Materials, v. 7, n. 2 (June 2019).
- (2019): Performance of recycled soda–lime glass powder in mitigating alkali–silica reaction. In: Green Materials, v. 7, n. 1 (March 2019).
- (2020): Properties and durability of concrete containing fluidized bed combustion (FBC) fly ash. In: Construction and Building Materials, v. 258 (October 2020).
- (2017): Evaluation of Two-Atmosphere Thermogravimetric Analysis for Determining the Unburned Carbon Content in Fly Ash. In: Advances in Civil Engineering Materials, v. 6, n. 1 (December 2017).
- (2010): Investigating the Alkali-Silica Reaction of Recycled Glass Aggregates in Concrete Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 22, n. 12 (December 2010).
- (2014): Fresh and Hardened Properties of Concrete Incorporating Recycled Glass as 100% Sand Replacement. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 10 (October 2014).
- (2017): Ductility enhancement of autoclaved cellulose fiber reinforced cement boards manufactured using a laboratory method simulating the Hatschek process. In: Construction and Building Materials, v. 135 (March 2017).
- (2013): Evaluating ion diffusivity of cracked cement paste using electrical impedance spectroscopy. In: Materials and Structures, v. 46, n. 5 (May 2013).
- (2007): Electrical conductivity of drying cement paste. In: Materials and Structures, v. 40, n. 10 (December 2007).
- (2014): Causes of Early Age Cracking on Concrete Bridge Deck Expansion Joint Repair Sections. In: Advances in Civil Engineering, v. 2014 ( 2014).
- (2012): A Prediction Method of Tensile Young's Modulus of Concrete at Early Age. In: Advances in Civil Engineering, v. 2012 ( 2012).
- (2017): Quantifying Permeability, Electrical Conductivity, and Diffusion Coefficient of Rough Parallel Plates Simulating Cracks in Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 9 (September 2017).
- (2005): Procedure to Interpret Electrical Conductivity Measurements in Cover Concrete during Rewetting. In: Journal of Materials in Civil Engineering (ASCE), v. 17, n. 5 (October 2005).
Structurae cooperates with
