Chi Sun Poon
- (2024): Recycling of contaminated waste glass in ultra-high performance concrete: Impurities impact. In: Construction and Building Materials, v. 437 (July 2024).
- (2024): Maximising the utilisation of WGP in seawater-mixed UHPC. In: Construction and Building Materials, v. 435 (July 2024).
- (2024): Intelligent real-time quality control for 3D-printed concrete with near-nozzle secondary mixing. In: Automation in Construction, v. 160 (April 2024).
- (2024): Mechanical behavior and microstructure mechanism of artificially stabilized marine sediment under high water content. In: Construction and Building Materials, v. 420 (March 2024).
- (2024): Micro and macro properties of silico-aluminophosphate geopolymer: Role of incinerated sewage sludge ash (ISSA). In: Construction and Building Materials, v. 416 (February 2024).
- (2024): Production of glass-ceramic aggregates from solid wastes for high-strength and low-shrinkage lightweight mortars. In: Construction and Building Materials, v. 416 (February 2024).
- (2023): Performance assessment of seawater fly ash cement paste with integrated physicochemical- geochemical simulation platform and experimental validation. In: Journal of Building Engineering, v. 79 (November 2023).
- (2023): Influence of seawater concentration on alkali-silica reaction of seawater sea-sand concrete: Mimicking through NaCl solution and recycled glass aggregate. In: Construction and Building Materials, v. 394 (August 2023).
- (2024): A novel self-hardening cementitious material by the self-activation of glass powder. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Influence of spatial dislocation of water on the properties of lightweight high-performance concrete. In: Construction and Building Materials, v. 367 (February 2023).
- (2022): Physicochemical investigation of Portland cement pastes prepared and cured with seawater. In: Materials and Structures, v. 55, n. 6 (26 June 2022).
- (2021): Production of lightweight aggregate ceramsite from red mud and municipal solid waste incineration bottom ash: Mechanism and optimization. In: Construction and Building Materials, v. 287 (June 2021).
- (2021): Influence of seawater on the mechanical and microstructural properties of lime-incineration sewage sludge ash pastes. In: Construction and Building Materials, v. 278 (April 2021).
- (2021): Modification of recycled aggregate by spraying colloidal nano silica and silica fume. In: Materials and Structures, v. 54, n. 6 (20 November 2021).
- (2021): An innovative way to enhance the high temperature properties of alkali activated cement mortars prepared by using glass powder as precursor. In: Materials and Structures, v. 54, n. 4 (2 July 2021).
- (2021): Optimization of gas-solid carbonation conditions of recycled aggregates using a linear weighted sum method. In: Developments in the Built Environment, v. 7 (July 2021).
- (2017): Influence of Dust and Oil Accumulation on Effectiveness of Photocatalytic Concrete Surfaces. In: Journal of Environmental Engineering (ASCE), v. 143, n. 9 (September 2017).
- (2020): Mechanism of strength evolution of seawater OPC pastes. In: Advances in Structural Engineering, v. 24, n. 6 (December 2020).
- (2018): A novel type of controlled low strength material derived from alum sludge and green materials. In: Construction and Building Materials, v. 165 (March 2018).
- (2018): Pathways of conversion of nitrogen oxides by nano TiO2 incorporated in cement-based materials. In: Building and Environment, v. 144 (October 2018).
- (2015): Photocatalytic activities of titanium dioxide incorporated architectural mortars: Effects of weathering and activation light. In: Building and Environment, v. 94 (December 2015).
- (2019): Influence of particle size of glass aggregates on the high temperature properties of dry-mix concrete blocks. In: Construction and Building Materials, v. 209 (June 2019).
- (2007): Influence of Fly Ash as Cement Replacement on the Properties of Recycled Aggregate Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 19, n. 9 (September 2007).
- (2013): Properties of mortar prepared with recycled cathode ray tube funnel glass sand at different mineral admixture. In: Construction and Building Materials, v. 40 (March 2013).
- (2017): Influences of corrosion degree and corrosion morphology on the ductility of steel reinforcement. In: Construction and Building Materials, v. 148 (September 2017).
- (2008): Influence of fly ash as a cement addition on the hardened properties of recycled aggregate concrete. In: Materials and Structures, v. 41, n. 7 (August 2008).
- (2004): Management of construction waste in public housing projects in Hong Kong. In: Construction Management and Economics, v. 22, n. 7 (September 2004).
- (2004): Minimizing demolition wastes in Hong Kong public housing projects. In: Construction Management and Economics, v. 22, n. 8 (October 2004).
- (2006): Paving blocks made with recycled concrete aggregate and crushed clay brick. In: Construction and Building Materials, v. 20, n. 8 (October 2006).
- (2018): Limitations and quality upgrading techniques for utilization of MSW incineration bottom ash in engineering applications – A review. In: Construction and Building Materials, v. 190 (November 2018).
Structurae cooperates with
