Andrea Polastri 
- (2024): Predicting the non-linear behaviour of cross laminated timber shearwalls with cut-out openings. In: Structures, v. 68 (October 2024).
- (2024): Structural behaviour of light-frame timber shear-walls with diagonal board sheathing. In: Construction and Building Materials, v. 416 (February 2024).
- (2023): Un Ponte strallato per attraversare l’impervia Valle dell’Anji-Khad. In: Strade e Autostrade, v. 26, n. 160 (July 2023).
- (2022): Mechanical behaviour of multi-panel cross laminated timber shear-walls with stiff connectors. In: Construction and Building Materials, v. 332 (May 2022).
- (2021): Experimental and numerical study on the mechanical behaviour of CLT shearwalls with openings. In: Construction and Building Materials, v. 298 (September 2021).
- (2021): On the distribution of internal forces in single-storey CLT symmetric shear-walls with openings. In: Structures, v. 33 (October 2021).
- (2021): CLT Shear Walls Anchored with Shear-Tension Angle Brackets: Experimental Tests and Finite-Element Modeling. In: Journal of Structural Engineering (ASCE), v. 147, n. 7 (July 2021).
- (2021): Earthquake-resistant CLT buildings stiffened with vertical steel ties. In: Journal of Building Engineering, v. 40 (August 2021).
- (2021): Influence of the rocking behavior of shearwalls on the fundamental period of CLT structures. In: Earthquake Engineering and Structural Dynamics, v. 50, n. 6 (May 2021).
- (2021): Investigating the kinematic modes of CLT shear-walls with openings. In: Engineering Structures, v. 228 (February 2021).
- (2021): Structural performance of a hybrid timber wall system for emergency housing facilities. In: Journal of Building Engineering, v. 33 (January 2021).
- (2020): A methodology to determine the seismic low-cycle fatigue strength of timber connections. In: Construction and Building Materials, v. 231 (January 2020).
- (2018): Numerical Study of Alternative Seismic-Resisting Systems for CLT Buildings. In: Buildings, v. 8, n. 11 (November 2018).
- (2019): A proposal for the capacity-design at wall- and building-level in light-frame and cross-laminated timber buildings. In: Bulletin of Earthquake Engineering, v. 17, n. 6 (April 2019).
- (2019): Low cycle ductile performance of screws used in timber structures. In: Construction and Building Materials, v. 217 (August 2019).
- (2011): Ductility of timber joints under static and cyclic loads. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 164, n. 2 (April 2011).
- (2018): Investigating the Hysteretic Behavior of Cross-Laminated Timber Wall Systems due to Connections. In: Journal of Structural Engineering (ASCE), v. 144, n. 5 (May 2018).
- (2018): A hysteresis model for timber joints with dowel-type fasteners. In: Engineering Structures, v. 157 (February 2018).
- (2015): Behaviour factor for innovative massive timber shear walls. In: Bulletin of Earthquake Engineering, v. 13, n. 11 (May 2015).
- (2016): Concrete-Plated Wooden Shear Walls: Structural Details, Testing, and Seismic Characterization. In: Journal of Structural Engineering (ASCE), v. 142, n. 4 (April 2016).
- (2018): Analytical Approach to Establishing the Elastic Behavior of Multipanel CLT Shear Walls Subjected to Lateral Loads. In: Journal of Structural Engineering (ASCE), v. 144, n. 2 (February 2018).
- (2018): Modelling the mechanical behaviour of typical wall-to-floor connection systems for cross-laminated timber structures. In: Engineering Structures, v. 162 (May 2018).
- (2017): An Innovative Connection System for Cross-Laminated Timber Structures. In: Structural Engineering International, v. 27, n. 4 (November 2017).
- (2007): Il ponte sul Rio Fuorni. In: Strade e Autostrade, v. 11, n. 64 (July 2007).
Structurae cooperates with
