Vincenzo Piluso 
- (2024): Experimental and analytical study on the behaviour of circular concrete filled steel tubes in cyclic bending. In: Engineering Structures, v. 304 (April 2024).
- (2024): Experimental lap-shear tests on friction dampers with single and double slotted holes. In: Engineering Structures, v. 308 (June 2024).
- (2024): Experimental assessment of the hysteretic response of resilient low-damage friction joints with different Belleville disk springs configurations. In: Soil Dynamics and Earthquake Engineering, v. 180 (May 2024).
- (2023): Moment Resisting Frames under the light of Japanese and European Codes. In: ce/papers, v. 6, n. 3-4 (September 2023).
- (2024): Experimental programme on austenitic stainless steel RHS members subjected to monotonic and cyclic bending. In: Engineering Structures, v. 302 (March 2024).
- (2023): Experimental campaign on structural aluminium alloys under monotonic and cyclic loading. In: Engineering Structures, v. 282 (May 2023).
- (2022): Experimental tests on SHS aluminium beams under non-uniform bending. In: Engineering Structures, v. 267 (September 2022).
- (2022): Performance-based rules for the simplified assessment of steel CBFs. In: Journal of Constructional Steel Research, v. 191 (April 2022).
- (2021): The Influence of the Material Properties on the Ultimate Behaviour of Aluminium H-shaped Beams. In: The Open Construction and Building Technology Journal, v. 15, n. 1 (18 March 2021).
- (2021): Modelling non-linear behaviur of aluminium alloy gusset joints for single layer lattices domes. In: Structures, v. 34 (December 2021).
- (2022): Experimental response of a large-scale two-storey steel building equipped with low-yielding friction joints. In: Soil Dynamics and Earthquake Engineering, v. 152 (January 2022).
- (2021): Experimental validation of a theoretical model accounting for floor joists contribution on the flexural resistance of beam-column joints in R. C. frames. In: Engineering Structures, v. 247 (November 2021).
- (2021): The influence of the axial restraint on the overstrength of short links. In: Journal of Constructional Steel Research, v. 184 (September 2021).
- (1996): A new design approach for braced frames with extended end plate connections. Presented at: IABSE Colloquium: Semi-Rigid Structural Connections, Istanbul, Turkey, 1996.
- (2010): Failure Mode and Drift Control of MRF-CBF Dual Systems. In: The Open Construction and Building Technology Journal, v. 4, n. 1 (November 2010).
- (2010): Failure Mode and Drift Control of MRF-CBF Dual Systems. In: The Open Construction and Building Technology Journal, v. 4, n. 1 (November 2010).
- (2014): New Advances in Seismic Design and Assessment of Steel Structures. In: The Open Construction and Building Technology Journal, v. 8, n. 1 (December 2014).
- (2018): Investigation on Friction Features of Dissipative Lap Shear Connections by Means of Experimental and Numerical Tests. In: The Open Construction and Building Technology Journal, v. 12, n. 1 (December 2018).
- (2009): Plastic design of eccentrically braced frames, II: Failure mode control. In: Journal of Constructional Steel Research, v. 65, n. 5 (May 2009).
- (2009): Plastic design of eccentrically braced frames, I: Moment–shear interaction. In: Journal of Constructional Steel Research, v. 65, n. 5 (May 2009).
- (2010): Plastic design of CB-frames with reduced section solution for bracing members. In: Journal of Constructional Steel Research, v. 66, n. 5 (May 2010).
- (2012): Moment resistance statistical distribution of beam-to-column composite joints. In: Journal of Constructional Steel Research, v. 78 (November 2012).
-
(1997): Plastic Design Of Seismic Resistant Steel Frames. In: Earthquake Engineering and Structural Dynamics, v. 26, n. 2 (February 1997).
https://doi.org/10.1002/(sici)1096-9845(199702)26:2<167::aid-eqe630>3.0.co;2-2
- (2016): Moment frames – concentrically braced frames dual systems: analysis of different design criteria. In: Structure and Infrastructure Engineering, v. 12, n. 1 (January 2016).
- (2015): Free from damage beam-to-column joints: Testing and design of DST connections with friction pads. In: Engineering Structures, v. 85 (February 2015).
- (2011): Local Buckling of Aluminum Alloy Angles under Uniform Compression. In: Journal of Structural Engineering (ASCE), v. 137, n. 2 (February 2011).
- (2017): P11.02: Experimental analysis and FE modeling of square hollow sections under combined axial and bending loads. In: ce/papers, v. 1, n. 2-3 (September 2017).
- (2017): Influence of connection typology on seismic response of MR-Frames with and without 'set-backs'. In: Earthquake Engineering and Structural Dynamics, v. 46, n. 1 (January 2017).
- (2019): Partial safety factors and overstrength coefficient evaluation for the design of connections equipped with friction dampers. In: Engineering Structures, v. 178 (January 2019).
- (2013): Experimental behaviour of friction T-stub beam-to-column joints under cyclic loads. In: Steel Construction, v. 6, n. 1 (February 2013).
Structurae cooperates with
