-
Faella, C. / Piluso, V. / Rizzano, G. (1996): Prediction of the flexural resistance of bolted connections with angles. Presented at: IABSE Colloquium: Semi-Rigid Structural Connections, Istanbul, Turkey, 1996.
https://doi.org/10.5169/seals-56921
-
Mita, L. / Piluso, V. / Rizzano, G. (2009): Theoretical and Experimental Analysis of Column Web in Compression~!2008-03-31~!2008-09-30~!2008-12-31~!. In: The Open Construction and Building Technology Journal, v. 2, n. 1 (January 2009).
https://doi.org/10.2174/1874836800802010313
-
Montuori, R. / Nastri, E. / Piluso, V. (2015): Seismic response of EB-frames with inverted Y-scheme: TPMC versus eurocode provisions. In: Earthquakes and Structures, v. 8, n. 5 (May 2015).
https://doi.org/10.12989/eas.2015.8.5.1191
-
Latour, M. / D'Aniello, M. / Zimbru, M. / Rizzano, G. / Piluso, V. / Landolfo, R. (2018): Removable friction dampers for low-damage steel beam-to-column joints. In: Soil Dynamics and Earthquake Engineering, v. 115 (December 2018).
https://doi.org/10.1016/j.soildyn.2018.08.002
-
Faella, C. / Piluso, V. / Rizzano, G. (1997): A new method to design extended end plate connections and semirigid braced frames. In: Journal of Constructional Steel Research, v. 41, n. 1 (January 1997).
https://doi.org/10.1016/s0143-974x(97)00001-1
-
Faella, C. / Piluso, V. / Rizzano, G. (1998): Cyclic behaviour of bolted joint components. In: Journal of Constructional Steel Research, v. 46, n. 1-3 (April 1998).
https://doi.org/10.1016/s0143-974x(98)80072-2
-
Piluso, V. / Rizzano, G. (2007): Random material variability effects on full-strength end-plate beam-to-column joints. In: Journal of Constructional Steel Research, v. 63, n. 5 (May 2007).
https://doi.org/10.1016/j.jcsr.2006.06.039
-
Longo, A. / Montuori, R. / Nastri, E. / Piluso, V. (2014): On the use of HSS in seismic-resistant structures. In: Journal of Constructional Steel Research, v. 103 (December 2014).
https://doi.org/10.1016/j.jcsr.2014.07.019
-
Montuori, R. / Nastri, E. / Piluso, V. (2017): Influence of the bracing scheme on seismic performances of MRF-EBF dual systems. In: Journal of Constructional Steel Research, v. 132 (May 2017).
https://doi.org/10.1016/j.jcsr.2017.01.018
-
Nastri, E. / Montuori, R. / Piluso, V. (2015): Seismic Design of MRF-EBF Dual Systems with Vertical Links: EC8 vs Plastic Design. In: Journal of Earthquake Engineering, v. 19, n. 3 ( 2015).
https://doi.org/10.1080/13632469.2014.978917
-
Longo, A. / Montuori, R. / Piluso, V. (2008): Influence of Design Criteria on the Seismic Reliability of X-braced Frames. In: Journal of Earthquake Engineering, v. 12, n. 3 ( 2008).
https://doi.org/10.1080/13632460701457231
-
Longo, A. / Montuori, R. / Piluso, V. (2008): Failure Mode Control of X-Braced Frames Under Seismic Actions. In: Journal of Earthquake Engineering, v. 12, n. 5 ( 2008).
https://doi.org/10.1080/13632460701572955
-
Latour, M. / Piluso, V. / Rizzano, G. (2011): Cyclic Modeling of Bolted Beam-to-Column Connections: Component Approach. In: Journal of Earthquake Engineering, v. 15, n. 4 ( 2011).
https://doi.org/10.1080/13632469.2010.513423
-
Iannone, F. / Latour, M. / Piluso, V. / Rizzano, G. (2011): Experimental Analysis of Bolted Steel Beam-to-Column Connections: Component Identification. In: Journal of Earthquake Engineering, v. 15, n. 2 ( 2011).
https://doi.org/10.1080/13632461003695353
-
Latour, M. / Piluso, V. / Rizzano, G. (2014): Experimental analysis on friction materials for supplemental damping devices. In: Construction and Building Materials, v. 65 (August 2014).
https://doi.org/10.1016/j.conbuildmat.2014.04.092
-
Latour, M. / Piluso, V. / Rizzano, G. (2014): Rotational behaviour of column base plate connections: Experimental analysis and modelling. In: Engineering Structures, v. 68 (June 2014).
https://doi.org/10.1016/j.engstruct.2014.02.037
-
Montuori, R. / Nastri, E. / Piluso, V. (2016): Modelling of floor joists contribution to the lateral stiffness of RC buildings designed for gravity loads. In: Engineering Structures, v. 121 (August 2016).
https://doi.org/10.1016/j.engstruct.2016.04.046
-
Faella, C. / Mazzolani, F. M. / Piluso, V. / Rizzano, G. (2000): Local Buckling of Aluminum Members: Testing and Classification. In: Journal of Structural Engineering (ASCE), v. 126, n. 3 (March 2000).
https://doi.org/10.1061/(asce)0733-9445(2000)126:3(353)
-
Longo, A. / Montuori, R. / Piluso, V. (2012): Failure Mode Control and Seismic Response of Dissipative Truss Moment Frames. In: Journal of Structural Engineering (ASCE), v. 138, n. 11 (November 2012).
https://doi.org/10.1061/(asce)st.1943-541x.0000569
-
Longo, A. / Montuori, R. / Piluso, V. (2014): Theory of plastic mechanism control for MRF–CBF dual systems and its validation. In: Bulletin of Earthquake Engineering, v. 12, n. 6 (April 2014).
https://doi.org/10.1007/s10518-014-9612-2
-
Santiago, A. / Simões da Silva, L. / da Silva, L. C. Fernandes / Cavallaro G., Ferrante / Francavilla, A. / Latour, M. / Piluso, V. / Rizzano, G. (2017): 11.30: Experimental behaviour of base plate joints equipped with self-centering system and friction dampers. In: ce/papers, v. 1, n. 2-3 (September 2017).
https://doi.org/10.1002/cepa.360
-
Mazzolani, F. M. / Mele, E. / Piluso, V. (1993): Caractérisation statistique des aciers de construction en vue du contrôle de la ductilité des structures. In: Construction Métallique, n. 4 ( 1993).