Jianzhong Pei 
- (2024): Durable and Environmental Asphalt Pavement with Plant Fiber: A State-of-the-Art Review. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 3 (March 2024).
- (2023): Current overview of impact analysis and risk assessment of urban pluvial flood on road traffic. In: Sustainable Cities and Society, v. 99 (December 2023).
- (2022): Building the cooling roads with high thermal conductivity pavements to relieve urban heat island effect. In: Construction and Building Materials, v. 346 (September 2022).
- (2021): Dynamic chemistry based self-healing of asphalt modified by diselenide-crosslinked polyurethane elastomer. In: Construction and Building Materials, v. 293 (July 2021).
- (2021): Compaction characteristics assessment of Hot-Mix asphalt mixture using Superpave gyratory compaction and Stribeck curve method. In: Construction and Building Materials, v. 285 (May 2021).
- (2021): Correlation analysis between asphalt binder/asphalt mastic properties and dynamic modulus of asphalt mixture. In: Construction and Building Materials, v. 276 (March 2021).
- (2021): Durability of rubberized asphalt binders containing waste cooking oil under thermal and ultraviolet aging. In: Construction and Building Materials, v. 299 (September 2021).
- (2021): Aging Property of Oil Recycled Asphalt Binders with Reclaimed Asphalt Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 9 (September 2021).
- (2021): Analysis of the Tire-Pavement Contact Stress Characteristics during Vehicle Maneuvering. In: KSCE Journal of Civil Engineering, v. 25, n. 7 (May 2021).
- (2021): Development and verification of integrated photoelectric system for noncontact detection of pavement ponding and freezing. In: Structural Control and Health Monitoring, v. 28, n. 6 (April 2021).
- (2021): Design and evaluation of high–luminance porous asphalt mixtures based on wasted glass for sponge city. In: Construction and Building Materials, v. 273 (March 2021).
- (2021): Correlation between geometric parameters of coarse aggregates and mixing rheological indices of asphalt mixture. In: Construction and Building Materials, v. 269 (February 2021).
- (2020): Correlation analysis between aging behavior and rheological indices of asphalt binder. In: Construction and Building Materials, v. 264 (December 2020).
- (2020): Effect of different fibers on the properties of asphalt mastics. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Effect of fiber length and surface treatment on the performance of fiber-modified binder. In: Construction and Building Materials, v. 248 (July 2020).
- (2020): Analysis of mechanical properties for two different structures of photovoltaic pavement unit block. In: Construction and Building Materials, v. 239 (April 2020).
- (2018): Degradation reliability modeling of stabilized base course materials based on a modulus decrement process. In: Construction and Building Materials, v. 177 (July 2018).
- (2019): Effect of Coarse Aggregate Composition on Physical and Mechanical Properties. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 10 (October 2019).
- (2019): The effect of retreated coal wastes as filler on the performance of asphalt mastics and mixtures. In: Construction and Building Materials, v. 203 (April 2019).
- (2012): Development and Validation of Viscoelastic-Damage Model for Three-Phase Permanent Deformation of Dense Asphalt Mixture. In: Journal of Materials in Civil Engineering (ASCE), v. 24, n. 7 (July 2012).
- (2015): Effect of nano-ZnO with modified surface on properties of bitumen. In: Construction and Building Materials, v. 98 (November 2015).
- (2015): Design, preparation and properties of microcapsules containing rejuvenator for asphalt. In: Construction and Building Materials, v. 99 (November 2015).
- (2015): Effect of curing compounds on the properties and microstructure of cement concretes. In: Construction and Building Materials, v. 101 (December 2015).
- (2016): Development and validation of nonlinear viscoelastic damage (NLVED) model for three-stage permanent deformation of asphalt concrete. In: Construction and Building Materials, v. 102 (January 2016).
- (2016): Design and performance validation of high-performance cement paste as a grouting material for semi-flexible pavement. In: Construction and Building Materials, v. 126 (November 2016).
- (2017): Characterizing the three-stage rutting behavior of asphalt pavement with semi-rigid base by using UMAT in ABAQUS. In: Construction and Building Materials, v. 140 (June 2017).
- (2017): Comprehensive service properties evaluation of composite grouting materials with high-performance cement paste for semi-flexible pavement. In: Construction and Building Materials, v. 153 (October 2017).
Structurae cooperates with
