Meghdad Payan 
- (2024): Geotechnical Performance of Alkali-Activated Uncalcined Clayey Soils with Hydroxide- and Aluminate-Based Activators. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 10 (October 2024).
- (2024): Influence of soil fabric anisotropy on the bearing capacity of geosynthetic-reinforced foundations under eccentric and inclined loadings. In: Soils and Foundations, v. 64, n. 3 (June 2024).
- (2024): Modulus reduction and damping characteristics of geotextile-reinforced sands. In: Soil Dynamics and Earthquake Engineering, v. 181 (June 2024).
- (2024): Effect of glass fiber (GF) on the mechanical properties and freeze-thaw (F-T) durability of lime-nanoclay (NC)-stabilized marl clayey soil. In: Construction and Building Materials, v. 416 (February 2024).
- (2023): Development of high-strength rammed earth walls with alkali-activated ground granulated blast furnace slag (GGBFS) and waste tire textile fiber (WTTF) as a step towards low-carbon building materials. In: Construction and Building Materials, v. 394 (August 2023).
- (2023): Recycling industrial alkaline solutions for soil stabilization by low-concentrated fly ash-based alkali cements. In: Construction and Building Materials, v. 393 (August 2023).
- (2023): Seismic Bearing Capacity of Eccentrically and Obliquely Loaded Strip Footings on Geosynthetic-Reinforced Soil. In: International Journal of Geomechanics, v. 23, n. 6 (June 2023).
- (2023): Nondestructive Shear Stiffness Evaluation of EPS-Sand Composites Using Quartz and Calcareous Aggregates. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 7 (July 2023).
- (2022): Data-Driven Prediction of Stability of Rock Tunnel Heading: An Application of Machine Learning Models. In: Infrastructures, v. 7, n. 11 (November 2022).
- (2023): Temperature-dependent lateral earth pressures in partially saturated backfills. In: European Journal of Environmental and Civil Engineering, v. 27, n. 10 (January 2023).
- (2023): Stability Analysis of Geosynthetic-Reinforced Shallow Foundations with a Lower-Bound FELA Approach Adopting the Nonassociated Plastic Flow Rule. In: International Journal of Geomechanics, v. 23, n. 2 (February 2023).
- (2023): Impact of Transient Infiltration on the Ultimate Bearing Capacity of Obliquely and Eccentrically Loaded Strip Footings on Partially Saturated Soils. In: International Journal of Geomechanics, v. 23, n. 2 (February 2023).
- (2023): Nonisothermal Failure Envelopes of Strip Shallow Foundations Resting on Partially Saturated Clay Subjected to Combined Inclined and Eccentric Loadings. In: International Journal of Geomechanics, v. 23, n. 1 (January 2023).
- (2023): Cyclic and Postcyclic Interface Characteristics of Geotextile-Embedded Sand-Rubber Composites. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 2 (February 2023).
- (2023): Assessment of the Hydraulic Characteristics of Aggregate-Expanded Polystyrene Beads Composite Using Enhanced Standard Proctor Compaction Test Configuration. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 47, n. 1 (7 January 2023).
- (2022): Deterministic Seismic Stability Analysis of Reinforced Slopes using Pseudo-Static Approach. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 47, n. 2 (July 2022).
- (2022): Numerical study on the bearing capacity of strip footing resting on partially saturated soil subjected to combined vertical-horizontal-moment loading. In: European Journal of Environmental and Civil Engineering, v. 27, n. 3 (May 2022).
- (2022): Limit Analysis of Lateral Earth Pressure on Geosynthetic-Reinforced Retaining Structures Subjected to Strip Footing Loading Using Finite Element and Second-Order Cone Programming. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 46, n. 4 (May 2022).
- (2021): Assessment of the compression characteristics and coefficient of lateral earth pressure of aggregate-expanded polystyrene beads composite fill-backfill using large oedometer experiments. In: Construction and Building Materials, v. 302 (October 2021).
- (2021): Impact of bedding plane direction and type of plastic microparticles on stiffness of inherently anisotropic gap-graded soils: Index, wave propagation and micromechanical-based interpretations. In: Soil Dynamics and Earthquake Engineering, v. 150 (November 2021).
- (2017): Effect of Gradation and Particle Shape on Small-Strain Young’s Modulus and Poisson’s Ratio of Sands. In: International Journal of Geomechanics, v. 17, n. 5 (May 2017).
- (2021): Limit Analysis of Modified Pseudodynamic Lateral Earth Pressure in Anisotropic Frictional Medium Using Finite-Element and Second-Order Cone Programming. In: International Journal of Geomechanics, v. 21, n. 2 (February 2021).
- (2020): Directional strength and stiffness characteristics of inherently anisotropic sand: The influence of deposition inclination. In: Soil Dynamics and Earthquake Engineering, v. 137 (October 2020).
- (2020): Elastic Dynamic Young’s Modulus and Poisson’s Ratio of Sand–Silt Mixtures. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 1 (January 2020).
- (2019): Small strain shear modulus of anisotropically loaded sands. In: Soil Dynamics and Earthquake Engineering, v. 125 (October 2019).
- (2016): Small-strain stiffness of sand subjected to stress anisotropy. In: Soil Dynamics and Earthquake Engineering, v. 88 (September 2016).
- (2018): Small strain damping ratio of sands and silty sands subjected to flexural and torsional resonant column excitation. In: Soil Dynamics and Earthquake Engineering, v. 114 (November 2018).
- (2017): Characterization of the small-strain dynamic behaviour of silty sands; contribution of silica non-plastic fines content. In: Soil Dynamics and Earthquake Engineering, v. 102 (November 2017).
Structurae cooperates with
