Alberto Pavese 
- (2024): Shaking table tests of a full-scale base-isolated flat-bottom steel silo equipped with curved surface slider bearings. In: Soil Dynamics and Earthquake Engineering, v. 176 (January 2024).
- (2023): Application of the new Italian assessment guidelines to a 1960s prestressed concrete road bridge. In: Structural Concrete, v. 24, n. 1 (February 2023).
- (2023): Experimental Validation of Fast Design Rules for Curved Surface Slider Devices through the Hybrid Simulation Technique. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2023): Experimental study on the in-plane response of cast-in-situ reinforced concrete sandwich walls under combined vertical and horizontal load. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2022): Experimental Hybrid Simulation of Severe Aftershocks Chains on Buildings Equipped with Curved Surface Slider Devices. In: Buildings, v. 12, n. 8 (31 July 2022).
- (2022): Experimental performance of a multi‐storey braced frame structure with non‐structural industrial components subjected to synthetic ground motions. In: Earthquake Engineering and Structural Dynamics, v. 51, n. 9 (25 July 2022).
- (2022): Shaking table tests of a full‐scale flat‐bottom manufactured steel silo filled with wheat: Main results on the fixed‐base configuration. In: Earthquake Engineering and Structural Dynamics, v. 51, n. 1 (January 2022).
- (2021): Experimental evaluation of extra-stroke displacement capacity for Curved Surface Slider devices. In: Soil Dynamics and Earthquake Engineering, v. 146 (July 2021).
- (2018): Optimized Design of Seismic Isolation Systems for Existing Bridges. Presented at: IABSE Symposium: Tomorrow’s Megastructures, Nantes, France, 19-21 September 2018.
- (2019): Assessment of the Seismic Response of Isolated Bridges under extra- stroke displacement demands. Presented at: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (2011): Experimental assessment of the seismic performance of a prefabricated concrete structural wall system. In: Engineering Structures, v. 33, n. 6 (June 2011).
- (1993): Diagnosis of masonry towers by dynamic identification. Presented at: IABSE Symposium: Structural Preservation of the Architectural Heritage, Rome, Italy, 1993.
- (2020): A framework for hybrid simulation with online model updating suitable for hard real‐time computing. In: Structural Control and Health Monitoring, v. 28, n. 1 (October 2020).
- (2020): Definition of a Simplified Design Procedure of Seismic Isolation Systems for Bridges. In: Structural Engineering International, v. 30, n. 3 (July 2020).
- (2020): Experimental Assessment of the Seismic Response of a Base-Isolated Building Through a Hybrid Simulation Technique. In: Frontiers in Built Environment, v. 6 (January 2020).
- (2020): Assessment of Scale Effects in the Experimental Evaluation of the Coefficient of Friction of Sliding Isolators. In: Journal of Earthquake Engineering, v. 26, n. 1 (April 2020).
- (2019): Strategies of structural health monitoring for bridges based on cloud computing. In: Journal of Civil Structural Health Monitoring, v. 9, n. 5 (October 2019).
- (2017): Experimental . Numerical Simulations: Seismic Response of a Half Scale Three-Storey Infilled RC Building Strengthened Using FRP Retrofit. In: The Open Civil Engineering Journal, v. 11, n. 1 (December 2017).
- (2019): A computational framework for fast‐time hybrid simulation based on partitioned time integration and state‐space modeling. In: Structural Control and Health Monitoring, v. 26, n. 10 (13 September 2019).
- (2019): Experimental investigation of the cyclic response of double curved surface sliders subjected to radial and bidirectional sliding motions. In: Soil Dynamics and Earthquake Engineering, v. 117 (February 2019).
- (2018): Experimental assessment of the cyclic response of friction-based isolators under bidirectional motions. In: Soil Dynamics and Earthquake Engineering, v. 114 (November 2018).
- (2011): Development of Software and Hardware Architecture for Real-Time Dynamic Hybrid Testing and Application to a Base Isolated Structure. In: Journal of Earthquake Engineering, v. 16, n. 1 ( 2011).
- (2004): Frp Seismic Retrofit Of Rc Square Hollow Section Bridge Piers. In: Journal of Earthquake Engineering, v. 8, n. 1 ( 2004).
- (2019): Experimental dynamic response of spherical friction-based isolation devices. In: Journal of Earthquake Engineering, v. 23, n. 9 ( 2019).
- (1997): Conceptual Design of Isolation Systems for Bridge Structures. In: Journal of Earthquake Engineering, v. 1, n. 1 ( 1997).
- (2017): Seismic Vulnerability Assessment of an Infilled Reinforced Concrete Frame Structure Designed for Gravity Loads. In: Journal of Earthquake Engineering, v. 21, n. 2 ( 2017).
- (2007): Performance-Based Seismic Retrofit Strategy for Existing Reinforced Concrete Frame Systems Using Fiber-Reinforced Polymer Composites. In: Journal of Composites for Construction, v. 11, n. 2 (April 2007).
- (2016): Modelling curved surface sliding bearings with bilinear constitutive law: effects on the response of seismically isolated buildings. In: Materials and Structures, v. 49, n. 6 (June 2016).
- (2010): An overview of seismic testing needs in Europe: towards a new advanced experimental facility. In: Bulletin of Earthquake Engineering, v. 9, n. 2 (November 2010).
- (2005): Experimental and Numerical Studies on the Seismic Response of R.C. Hollow Bridge Piers. In: Bulletin of Earthquake Engineering, v. 3, n. 3 (December 2005).
Structurae cooperates with
