Hong-Gun Park 
- (2019): Eccentric compression behavior of concrete-encased-and-filled steel tube columns with high-strength circular steel tube. In: Thin-Walled Structures, v. 144 (November 2019).
- : Dynamic Soil Pressure Acting on Building Basement According to Embedment Depth. In: Journal of Earthquake Engineering.
- (2024): Deformation Capacity of Columns with 700 MPa Longitudinal Reinforcement and Hoops. In: Journal of Structural Engineering (ASCE), v. 150, n. 6 (June 2024).
- (2024): Effect of Prestressing on Shear Strengths of Cylindrical and Planar Walls with Low Aspect Ratio. In: ACI Structural Journal, v. 121, n. 1 ( 2024).
- (2021): Direct shear test and cyclic loading test for seismic capacity of dimension stone panel cladding with dowel pin connection. In: Journal of Building Engineering, v. 38 (June 2021).
- (2021): Effect of boundary confinement on ductility of RC walls. In: Engineering Structures, v. 230 (March 2021).
- (2021): Damping Ratio of RC Squat Wall with Limited Damage under High-Frequency Earthquake. In: Journal of Structural Engineering (ASCE), v. 147, n. 1 (January 2021).
- (2020): Eccentric-Axial-Load Test for Composite Columns Using Bolt-Connected Steel Angles. In: Journal of Structural Engineering (ASCE), v. 146, n. 9 (September 2020).
- (2020): Effect of magnesium formate as compared with magnesium oxide on the strength enhancement and microstructures of CaO-activated Class F fly ash system. In: Construction and Building Materials, v. 253 (August 2020).
- (2018): Development Length of Compression Reinforcing Bar Based on Nonuniform Bond Stress Distribution. In: ACI Structural Journal, v. 115, n. 6 (November 2018).
- (2018): Effects of Type of Bar Lap Splice on Reinforced Concrete Columns Subjected to Cyclic Loading. In: ACI Structural Journal, v. 116, n. 2 (March 2018).
- (2017): Development Length of Standard Hooked Bar Based on Non-Uniform Bond Stress Distribution. In: ACI Structural Journal, v. 114, n. 6 (November 2017).
- (2015): Cyclic Loading Tests for Shear Strength of Low-Rise Reinforced Concrete Walls with Grade 550 MPa Bars. In: ACI Structural Journal, v. 112, n. 3 (May 2015).
- (2019): Development Length of Headed Bar Based on Nonuniform Bond Stress Distribution. In: ACI Structural Journal, v. 116, n. 1 (January 2019).
- (2019): Design Earthquake Response Spectrum Affected by Shallow Soil Deposit. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2017): Effect of Steel Fibers on Minimum Shear Reinforcement of High-Strength Concrete Beams. In: ACI Structural Journal, v. 114, n. 5 (September 2017).
- (2017): Cyclic Loading Tests for Reinforced Concrete Walls (Aspect Ratio 2.0) with Grade 550 MPa (80 ksi) Shear Reinforcing Bars. In: ACI Structural Journal, v. 114, n. 3 (May 2017).
- (2017): Development of strong lightweight cementitious matrix for lightweight concrete simply by increasing a water-to-binder ratio in Ca(OH)2-Na2CO3-activated fly ash system. In: Construction and Building Materials, v. 152 (October 2017).
- (2015): Early Crushing Failure of High-Rise Shear Walls with No Boundary Confinement. In: Advances in Structural Engineering, v. 18, n. 7 (July 2015).
- (2010): Evaluation of energy dissipation of slender reinforced concrete members and its applications. In: Engineering Structures, v. 32, n. 9 (September 2010).
- (2009): Energy-based cyclic force–displacement relationship for reinforced concrete short coupling beams. In: Engineering Structures, v. 31, n. 9 (September 2009).
- (2015): Design considerations for interior RC beam–column joint with additional bars. In: Engineering Structures, v. 98 (September 2015).
- (2017): Eccentric Axial Load Test for High-Strength Composite Columns of Various Sectional Configurations. In: Journal of Structural Engineering (ASCE), v. 143, n. 8 (August 2017).
- (2017): Eccentric Compression Strength of Rectangular Concrete-Filled Tubular Columns Using High-Strength Steel Thin Plates. In: Journal of Structural Engineering (ASCE), v. 143, n. 5 (May 2017).
- (2017): Effect of Sustained Load on Ultimate Strength of High-Strength Composite Columns Using 800-MPa Steel and 100-MPa Concrete. In: Journal of Structural Engineering (ASCE), v. 143, n. 3 (March 2017).
- (2014): Eccentric Axial Load Capacity of High-Strength Steel-Concrete Composite Columns of Various Sectional Shapes. In: Journal of Structural Engineering (ASCE), v. 140, n. 4 (April 2014).
- (2013): Cyclic Seismic Testing of Composite Concrete-Filled U-Shaped Steel Beam to H-Shaped Column Connections. In: Journal of Structural Engineering (ASCE), v. 139, n. 3 (March 2013).
- (2012): Eccentric Axial Load Testing for Concrete-Encased Steel Columns Using 800 MPa Steel and 100 MPa Concrete. In: Journal of Structural Engineering (ASCE), v. 138, n. 8 (August 2012).
- (2008): Ductility and Energy Dissipation Capacity of Shear-Dominated Steel Plate Walls. In: Journal of Structural Engineering (ASCE), v. 134, n. 9 (September 2008).
- (2010): Elongation of Reinforced Concrete Members Subjected to Cyclic Loading. In: Journal of Structural Engineering (ASCE), v. 136, n. 9 (September 2010).
Structurae cooperates with
