Bo Pang 
- (2024): Durability enhancement of cement-based repair mortars through waterborne polyurethane modification: Experimental characterization and molecular dynamics simulations. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Development and application of artificial hydraulic lime for Chinese architectural heritage restorations. In: Construction and Building Materials, v. 442 (September 2024).
- (2024): Bionic repair protective coatings with high toughness and bond strength based on anionic waterborne polyurethane-modified cement. In: Construction and Building Materials, v. 444 (September 2024).
- (2024): Energy conservation and carbon emission reduction of cold recycled petroleum asphalt concrete pavement with cement-stabilized phosphogypsum. In: Construction and Building Materials, v. 433 (June 2024).
- (2024): Design and preparation of durable intelligent haze removal and self-cleaning protective coatings. In: Journal of Building Engineering, v. 92 (September 2024).
- (2024): Internal superhydrophobic marine concrete: Interface modification based on slag microstructure regulation. In: Journal of Building Engineering, v. 86 (June 2024).
- (2023): Degradation of GFRP bars in alkaline environments: An experimental and molecular dynamics study. In: Journal of Building Engineering, v. 77 (October 2023).
- (2023): The influence of moisture and epoxy bonding agents on interfacial behavior between normal concrete substrate and ultrahigh performance concrete as a repair material: Experimental and molecular dynamics study. In: Construction and Building Materials, v. 372 (April 2023).
- (2023): Influence of gradation on extrusion-based 3D printing concrete with coarse aggregate. In: Construction and Building Materials, v. 403 (November 2023).
- (2023): Experimental study on early shrinkage and later expansion of concrete under a simulated geothermal environment. In: Journal of Building Engineering, v. 72 (August 2023).
- (2023): Experimental study of delayed ettringite formation under geothermal high-temperature environment. In: Journal of Building Engineering, v. 78 (November 2023).
- (2023): Cement-based ductile rapid repair material modified with self-emulsifying waterborne epoxy. In: Journal of Building Engineering, v. 79 (November 2023).
- (2023): Analogue study on the classification and identification of landslide dynamics based on spectral features of slidequake signals. In: Soil Dynamics and Earthquake Engineering, v. 173 (October 2023).
- (2023): Effect of foam temperature on foam stability of foamed concrete and stabilization mechanisms. In: Journal of Building Engineering, v. 77 (October 2023).
- (2023): 3D Printed concrete with coarse aggregates: Built‒in‒Stirrup permanent concrete formwork for reinforced columns. In: Journal of Building Engineering, v. 70 (July 2023).
- (2023): Initial stage degradation of GFRP bars based on functional group ratio change using FTIR in high temperature and alkaline solution. In: Journal of Building Engineering, v. 68 (June 2023).
- (2023): Degradation of mortar fully buried in saline soil containing sodium sulfate or magnesium sulfate. In: Construction and Building Materials, v. 369 (March 2023).
- (2022): Durability performance of an RC beam under real marine all corrosion zones exposure for 7 years. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2023): Effect of multifunctional modification of waste rubber powder on the workability and mechanical behavior of cement-based materials. In: Construction and Building Materials, v. 363 (January 2023).
- (2022): Evaluation on the progressive collapse resistance of infilled reinforced concrete frames based on numerical and semi-analytical methods. In: Engineering Structures, v. 267 (September 2022).
- (2021): Effects of K-struvite on hydration behavior of magnesium potassium phosphate cement. In: Construction and Building Materials, v. 275 (March 2021).
- (2022): Impact of particle size of fly ash on the early compressive strength of concrete: Experimental investigation and modelling. In: Construction and Building Materials, v. 323 (March 2022).
- (2021): Extrusion-based 3D printing concrete with coarse aggregate: Printability and direction-dependent mechanical performance. In: Construction and Building Materials, v. 296 (August 2021).
- (2022): Investigation of the Structural Behaviour of RC Beam-Column Sub-frame Subjected to Progressive Collapse. In: KSCE Journal of Civil Engineering, v. 26, n. 4 (January 2022).
- (2020): Effect of rice husk ash on early hydration behavior of magnesium phosphate cement. In: Construction and Building Materials, v. 263 (December 2020).
- (2013): The Application of Community Co-Management in Ecological Function Area Planning - Taking the Example of Planning for Sustainable Development of Xing’an Ecological Function Area. In: Applied Mechanics and Materials, v. 357-360 (August 2013).
- (2018): Fresh properties of a novel 3D printing concrete ink. In: Construction and Building Materials, v. 174 (June 2018).
- (2018): Investigation and Analysis of Living Environment in Harbin. Presented at: 2012 International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE 2012), August 10-12th 2012, Zhangjiajie (China).
- (2018): An Ideal-Point-Based Approach to Coal Mining Area Land Development Suitability Evaluation. Presented at: 2012 International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE 2012), August 10-12th 2012, Zhangjiajie (China).
- (2016): Autogenous and engineered healing mechanisms of carbonated steel slag aggregate in concrete. In: Construction and Building Materials, v. 107 (March 2016).
Structurae cooperates with
