Zhu Pan 
- (2024): Optimization of Sustainable Alkali Activated Municipal Solid Waste Incinerator Bottom Ash Materials with High Performance. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 10 (October 2024).
- (2024): Improved mechanical properties and fiber dispersion of limestone calcined clay cement (LC³) mortars by adjusting the mixing methods. In: Journal of Building Engineering, v. 95 (October 2024).
- (2024): Effect of silica fume type on rheology and compressive strength of geopolymer mortar. In: Construction and Building Materials, v. 430 (June 2024).
- (2024): Fresh and hardened properties of 3D printing mortar modified by halloysite nanotube. In: Journal of Building Engineering, v. 93 (September 2024).
- (2024): Performance and deterioration mechanisms of PAC amended calcium bentonite in seawater with different compositions. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Development of lightweight alkali-activated composites incorporating cenopsheres: Exhibiting high strength/density ratio and low thermal conductivity. In: Construction and Building Materials, v. 409 (December 2023).
- (2009): An investigation of the mechanisms for strength gain or loss of geopolymer mortar after exposure to elevated temperature. In: Journal of Materials Science, v. 44, n. 7 (April 2009).
- (2012): Damping and microstructure of fly ash-based geopolymers. In: Journal of Materials Science, v. 48, n. 8 (December 2012).
- (2014): Effect of transient creep on compressive strength of geopolymer concrete for elevated temperature exposure. In: Cement and Concrete Research, v. 56 (February 2014).
- (2022): Effect of silica fume on compressive strength of ultra-high-performance concrete made of calcium aluminate cement/fly ash based geopolymer. In: Journal of Building Engineering, v. 62 (December 2022).
- (2022): 3D-printable aerogel-incorporated concrete: Anisotropy influence on physical, mechanical, and thermal insulation properties. In: Construction and Building Materials, v. 323 (March 2022).
- (2022): Use of sodium/potassium citrate to enhance strength development in carbonate-activated hybrid cement. In: Construction and Building Materials, v. 350 (October 2022).
- (2022): Study on mechanical properties and solidification mechanism of stabilized dredged materials with recycled GFRP fibre reinforced geopolymer. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2015): Reinforcing Effects of Graphene Oxide on Portland Cement Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 2 (February 2015).
- (2012): Effect of aggregate size on spalling of geopolymer and Portland cement concretes subjected to elevated temperatures. In: Construction and Building Materials, v. 36 (November 2012).
- (2013): Effect of very fine particles on workability and strength of concrete made with dune sand. In: Construction and Building Materials, v. 47 (October 2013).
- (2014): Effects of mineral admixtures and lime on disintegration of alkali-activated slag exposed to 50°C. In: Construction and Building Materials, v. 70 (November 2014).
- (2014): Nano reinforced cement and concrete composites and new perspective from graphene oxide. In: Construction and Building Materials, v. 73 (December 2014).
- (2016): Performance of concrete made with steel slag and waste glass. In: Construction and Building Materials, v. 114 (July 2016).
- (2015): Mechanical behavior of geopolymer concrete subjected to high strain rate compressive loadings. In: Materials and Structures, v. 48, n. 3 (March 2015).
- (2018): Measurement and prediction of thermal properties of alkali-activated fly ash/slag binders at elevated temperatures. In: Materials and Structures, v. 51, n. 4 (August 2018).
- (2014): Effect of strain rate on splitting tensile strength of geopolymer concrete. In: Magazine of Concrete Research, v. 66, n. 16 (August 2014).
- (2011): Fracture properties of geopolymer paste and concrete. In: Magazine of Concrete Research, v. 63, n. 10 (October 2011).
- (2018): Effect of calcium aluminate cement on geopolymer concrete cured at ambient temperature. In: Construction and Building Materials, v. 191 (December 2018).
Structurae cooperates with
